Brophy Ball Mount - 7" Rise, 8" Drop - 15-1/4" Long - Aluminum - 8,000 lbs

See what our Experts say about this Brophy Trailer Hitch Ball Mount

• Gooseneck Trailer Compatibility with 1995 Ford F-150
  The Brophy Ball Mount - 7" Rise, 8" Drop - 15-1/4" Long - Aluminum - 8,000 lbs # EA80 is only rated for a tongue weight of 800 lbs which most trailer hitch receivers won't be able to handle but most gooseneck trailers will exceed. Gooseneck trailers typically use the 2-5/16 inch hitch ball like # SC30-C that is also the size used with larger bumper pull trailers, however it is not recommended to tow a gooseneck trailer behind your bumper as they are designed to be towed over the rear axle...
  view full answer...
• Hitch & Ball Mount for 2002 Jeep Wrangler to Clear Spare Tire
  You can avoid clearance issues between your 2002 Jeep Wrangler's rear-mounted spare tire and your towing ball mount by using a ball mount long enough that will extend past the rear edge of the tire. The 2-inch hitch I suggest for your 2002 Jeep Wrangler Unlimited is Curt # 13408. This is a no-drill bolt-on installation. When we installed a Class III hitch on your vehicle we found that the distance from the hitch pin hole to the rear of the spare tire was 6-1/4-inches. Once it is installed...
  view full answer...
  
• 8 Inch Drop Ball Mount with Longer Shank for Attachment of Towing Bike Rack
  For a longer 2 inch ball mount that has 8 inches of drop the Brophy part # EA80 would most likely be your best option. This ball mount has 4-1/8 inches from the center of the hitch pin hole to the beginning of the bend in the ball mount. Or for a steel ball mount with 4 inches you would want the # AMSC8.
  view full answer...
• Ball Mount Extension or Extended Ball Mount For Curt Clamp-On Bike Rack
  If you put on a Hitch Extender # HE06 you will reduce your trailering capacity to 350lbs tongue weight and 3,500 total trailer weight. Most of the receiver extensions with that much rise include a gusset for strength that may prevent the Curt Clamp-On 3 Bike Rack # C18013 from fitting properly. One that you can consider is the Brophy Ball Mount # EA80. It has no gusset but the design may not allow it to work. I have included a picture with the mount measurements for you to compare with...
  view full answer...
  
• 2 Inch Ball for Brophy Ball Mount with 1-1/4 Inch Thick Ball Platform
  You are correct about ball mount # EA80. The ball platform is indeed 1 inch thick. The 2 inch ball # 63852 does not have a long enough shank to be used with this ball mount. You will need a 2 inch ball with a long shank such as # 63849. It isn't stainless steel like the other ball and there isn't a stainless steel option with a long enough shank that would work.
  view full answer...
• Recommended Ball Mount With 7 Inches of Rise for a 2012 Hyundai Sante Fe
  The Draw-Tite Ball Mount # 2793 does have the needed 7 inches of rise, but from the center of the pin hole to the closest edge of the upright gusset is only 3 3/4 inches, so I don't think it will work with your vehicle, unfortunately. That being said, we do have a couple other options available for you. The Brophy # EA80 has the needed 7 inches of rise, but at the closest point it is 4 1/8 inches to the center of the pin hole. This does rise pretty quickly and may still work for you, but...
  view full answer...
• Ball Mount Recommendation for a 2014 Toyota Sienna to Tow a Boat Trailer Level
  Since the coupler height on the trailer is 18 inches and the receiver height on the 2014 Toyota Sienna is 11-1/4 inches a ball mount with a 4 inch rise will not be high enough to tow the trailer level. You would need a ball mount with a 6-3/4 inch rise (or something very close) to tow the trailer level. Let's first make sure we measure things the same way. We measure the receiver height the same as you have done; to the top of the receiver opening. On the trailer side, with the trailer...
  view full answer...
• What Type of Aluminum is The Brophy Ball Mount # EA80 Manufacturered From?
  The Brophy Ball Mount # EA80 is forged with 6061 aluminum and heat treated for strength.
  view full answer...
• What Small Trailer do You Recommend for My 2015 Dodge Dart?
  According to the stats I found on your 2015 Dodge Dart, it is only rated to tow up to 1,000 pounds. We do have a utility trailer that weighs only 305 pounds. That is the Detail K2 Mighty Multi Utility Trailer - 6' Long # K2MMT4X6. We also have the heavier/larger Detail K2 Mighty Multi A-Frame Utility Trailer - 7-1/2' Long # K2MMT5X7 (451 pounds). However, given these two trailers, I recommend the # K2MMT4X6 because the tailgate can be used as a ramp and it weighs less. If you need wiring,...
  view full answer...
• What Does Brophy Aluminum Ball Mount # EA80 Weigh
  The Brophy aluminum ball mount part # EA80 weighs 8 lbs. We should have the weights listed (not sure why we don't) but I would say most of the aluminum options like this are going to weigh about the same.
  view full answer...

Do you have a question about this Trailer Hitch Ball Mount?