Curt Ball Mount for 2" Hitches - 4" Rise, 6" Drop - 14-1/4" Long - 6,000 lbs

See what our Experts say about this CURT Trailer Hitch Ball Mount

• Trailer Hitch Recommendation for 2017 Toyota Highlander
  For your 2017 Toyota Highlander the best hitch option is the Draw Tite # DT65MR as it has the best capacity and has a great price. Hitch installs are pretty basic for qualified mechanics. The best advice I can give would be to find a local mechanic to you with a good reputation and let them install it. I attached an install video as well for you to check out to see if you might be able to tackle it yourself.
  view full answer...
• Extra Long Ball Mount Approximately 14 Inches From Center of Hitch Pin to Center of Ball Hole
  We offer an Extra Long Ball Mount, # D-28, which has a 4 inch rise and a 6 inch drop. The distance from the center of the pin hole to the center of the ball hole is 14-1/4 inches. In order to maintain the structural integrity of the ball mount, making modifications like drilling a new hole is strongly discouraged and all warranties would be void.
  view full answer...
• Towing Bike Rack Availability with 5 Drop Ball Mount for Towing Vintage Trailer
  We do have ball mounts with a 5" drop that you can use with the Swagman Traveler XCS # S64664, but none of our towing bike racks come with a ball mount that has a 5" drop (none of them actually come with a ball mount as the pictures are for demonstration purposes). If you would like to stick with the XCS that you referenced then I recommend using the etrailer.com Ball Mount Kit # 989900 for 2" trailer hitches. This comes with a 2 different ball mounts, one of which has a 4" drop (which...
  view full answer...
• Ball Mount For 2002 Toyota Sienna With Curt Hitch C13511 For Towing U-Haul Trailer
  I can help you out with the right ball mount and hitch ball for your 2002 Toyota Sienna so you can tow a U-Haul trailer with the Curt Trailer Hitch Receiver # C13511. When we installed this hitch on a 2002 Sienna, we found that the distance from the ground to the top of the hitch receiver was 13-1/2 inches; since the bottom of the U-haul coupler is going to be 18-1/2 inches from the ground (that is what they mean when they say "optimal ball height" as that is how far off the ground the...
  view full answer...
• Trailer Hitch Recommendation for Non-Trailhawk 2018 Jeep Cherokee
  The Draw-Tite # DT28MR will only fit Trailhawk models, as they have a different rear bumper. If you attempted to install it on a non-Trailhawk model the bumper would get in the way and prevent you from installing it. For a non-Trailhawk 2018 Jeep Cherokee, I'd recommend the Curt Class III hitch, part # C13172. When installed, the hitch will be mostly concealed behind the bumper with the only visible portions of the hitch being the square receiver tube and the safety chain hoops. The installation...
  view full answer...
  
• Which Stealth Hitch Option for Towing Small Boat With 2021 Hyundai Palisade
  The # 391CONVPT5L Stealth Hitch you'd looked at doesn't include the receiver that's designed for towing, it's meant for hitch mounted accessories only, but there are options that would allow you to tow your boat. To tow your boat, there's a couple ways you can go to upgrade to make that possible. You could use the part # 391CONVPT5L hitch, add the # 391BMU5L ball mount and a # 63845 2-inch trailer ball and the # CU94FR 4-pole trailer wiring harness, which would provide you everything you...
  view full answer...
  
• Availability Of 12" Long Ball Mount With 1-1/4" Hitch Ball Hole And 3" Rise
  I have an option that may work for you, but we do not have a ball mount with 4" rise, a 1-1/4" shank hole, and is 13" - 14-1/2" long. The closest option we have is the Draw-Tite Ball Mount for 2" Hitches - 3" Rise, 4" Drop - 12" Long - 12,000 lbs # 4285 which is 12" long and has a 3" rise. For this option you would use 2-5/16" hitch ball # BWHB94003 which has a 3-1/4" long shank and has a 1" rise to get you back up to 4" total rise. If your new trailer is under 6000lbs I recommend is...
  view full answer...
  
• Recommended Trailer Wiring Harness for 2016 Toyota RAV4
  The Curt # C56217 T-Connector you'd looked at is a fit for the 2008-2019 Toyota Highlander, so it wouldn't fit your RAV4. For the 2016 RAV4, I'd recommend the Curt # C56350 which would install as shown in the linked video. I've also linked to the product description page which shows current pricing. In addtion to the hitch and wiring harness, you'll also need a ball mount, a hitch pin and the appropriately sized trailer ball. For a ball mount, I'd recommend the # D-28 and the # PC3 hitch...
  view full answer...
• Need a Ball Mount with 5-Inches of Rise or Drop to Match Trailer Coupler and Hitch Heights
  We do offer a range of fixed 2-inch ball mounts with rise and drop. Since I do not know whether you need 5-inches of rise or drop I have included a link to our page for fixed 6000-lb-rated ball mounts. You can use the filters in the left-hand margin to select either rise or drop. It is fine for the hitch ball to be slightly higher than the coupler since the tongue weight of the trailer will cause some degree of squat when the trailer is hitched. Part # D-28 offers 4-inches of rise or...
  view full answer...
• Recommended Trailer Hitch and Towing Accessories for 2012 Kia Sportage SX
  We'd be happy to help! Although the Draw-Tite # 75717 would fit for you, we'd recommend going with a US made product like the etrailer brand Class III hitch, part # e84KR. The hitch is compatible with the SX trim. If you'll be towing with the hitch, you'll also need a trailer wiring harness like # C56251. For a ball mount, use # D-28 and for a trailer ball, use # 40038 for a 2 inch ball or # C40002 for a 1-7/8 inch ball. I've linked to some install videos that you might find helpful.
  view full answer...
• Trailer Hitch and Wiring Harness Fit for 2020 Ford Escape Titanium Hybrid
  As long as your Escape Titanium Hybrid isn't a PHEV model, we do have a hitch fit and a trailer wiring harness for you. I'd recommend the Curt Class III hitch, part # C23FR. For a wiring harness fit, I'd recommend the Tekonsha # TE54FR. For a ball mount, use # D-28 along with a # PC3 hitch pin. For a trailer ball, use # 40038 for a 1-7/8 inch or # 63845 for a 2 inch ball.
  view full answer...
• Fit of etrailer e53KR Class III Hitch on 2021 Volvo XC90 Inscription Recharge
  The etrailer # e53KR Class III hitch fits all models of the 2021 Volvo XC90, including the Inscription Recharge. The install procedure shown in the linked video for the 2019 XC90 would be the same as the 2021. If you'll be using the hitch for towing purposes, you'll also need a trailer wiring harness like # 118683, a ball mount like # D-28, a # PC3 hitch pin and a trailer ball like # 19260 for a 1-7/8 or # 63845 for a 2 inch. I've also linked to an install video for the trailer wiring harness.
  view full answer...
• Ball Mount Needed for etrailer e98853 Class III Hitch on 2011 Toyota Sienna
  When we installed the etrailer brand # e98853 Class III hitch on a 2011 Toyota Sienna, we found that the inside top edge of the receiver tube sat 12 inches above the ground. The rise/drop of the ball mount you need will depend on the coupler height of the trailer you're wanting to pull. With the trailer jack extended so that the trailer frame is level, measure the distance from the bottom edge of the coupler to the ground. I'll link you to a help article that fully explains how to take...
  view full answer...
• 2-Inch Hitch Ball Recommendation for Use With Hidden Hitch Ball Mount D-28
  You will need to select a 2-inch hitch ball with a 1-inch diameter medium-length shank for use with Hidden Hitch Ball Mount # D-28. You can use Tow Ready 2-inch hitch ball # 63845. This ball has a 1-inch diameter shank of 2-1/8-inches in length and a rated capacity of 7500-lbs. I have linked brief review videos for this ball mount and hitch ball. If you wish to secure your ball mount to your hitch receiver we offer locks to do so, such as the etrailer.com Trailer Hitch Receiver Lock...
  view full answer...
• Differences Between Available Class III Trailer Hitches for 2021 Nissan Rogue
  We offer the Draw-Tite # DT85MR, the etrailer brand # e93ZR and the Curt # C24HR Class III hitches, all of which will fit your 2021 Nissan Rogue. All three hitches have identical towing/tongue weight capacities of 3500/525 lbs. The Curt and the etrailer brand are nearly identical, with the only difference between the two is the finish, the etrailer brand hitch has a matte finish while the Curt hitch finish is glossy. Given the choice between the three, I'd personally choose the Draw-Tite...
  view full answer...
• Best Wiring Harness for Towing With 2017 CR-V
  Other than the higher amperage rating offered by the Tekonsha # 118741, there isn't much in the way of differences between it and the Curt # C56370. Both use solid state construction, the Curt uses the SMT which doesn't use through-holes in the circuit boards, while the Tekonsha uses a fully potted converter box which completely seals the circuit board from moisture and dirt intrusion which would make it more reliable in the long run, in my opinion. Both harnesses include the dust cap for...
  view full answer...
• Is Bumper Fascia Trimming Needed to Install etrailer e89YR Class III Hitch on 2021 Ford Escape
  To install the etrailer brand # e89YR Class III hitch on your 2021 Ford Escape, you will NOT need to trim the bumper fascia, as you can see in the provided photo and video showing the identical Curt hitch being installed on a 2021 Ford Escape like yours. If you'll be towing with the hitch, you'll also need a trailer wiring harness like # TE54FR, a ball mount like # D-28 along with a # PC3 hitch pin and a trailer ball like # 19260 for a 1-7/8 or # 63845 for a 2 inch ball.
  view full answer...
  
• Concealed Trailer Hitch With Maximum Ground Clearance/Trailer Wiring Harness for 2020 Toyota Sienna
  I'd be happy to help with that. Let's begin with the hitch. For the most concealment/ground clearance I'd recommend the Curt class III hitch, part # C13343. This hitch will be mostly concealed, with the crossbar being hidden behind the bumper/fascia. The only visible portion of the hitch will be the receiver tube and the safety chain loops. For a 4-pole trailer wiring harness, I'd recommend the Tekonsha # 118648. You'll also need a ball mount. The average leveled height of a trailer...
  view full answer...
  
• Trailer Hitch For Towing a 3,500LB Camper With a 2013 Jeep Wrangler Unlimited
  The Curt Ball Mount # D-28 is going to be the closest ball mount we have to what you are looking for. This mount is 14-1/4" from center of hitch pin to center of 1" hitch ball hole. It has a 6" drop but with the addition of the 2-5/16" Curt RockerBall # C82KR it has a raised base so you will end up with a 4.5" drop. This RockerBall will help to absorb shock from the trailer and give you a better ride. With the light suspension on your 2013 Jeep Wrangler Sahara Unlimited being designed...
  view full answer...
• Dimensions of the Stromberg Carlson Electric Trailer Jack JET-5000
  From the center of the tube to the furthest part of the motor housing on the Stromberg Carlson Electric Trailer Jack item # JET-5000 measures right at 5-3/4". The distance from the mounting bracket to the top of the jack is 23". This jack would clear a tailgate if the measured distance from the back of the tailgate to the jack mounting point on the trailer was 24", which gives 1" of clearance. It can not be mounted at 90 degrees. No electric jack like this can. If you are worried about...
  view full answer...
• Trailer Hitch and Trailer Wiring Harness Recommendation for 2011 Volkswagen Jetta SportWagen TID
  If you're looking for a US manufactured hitch for your 2011 VW Jetta SportWagen TDI, I'd recommend the EcoHitch # 306-X7284. This is the only US manufactured hitch we offer that's a fit for your vehicle. For a trailer wiring harness, I'd recommend the # C59496. I've linked to an installation video for the hitch. You'll also need a ball mount like # D-28, a hitch pin, # PC3 and a trailer ball like # 19260 for a 1-7/8 inch or # 63845 for a 2 inch.
  view full answer...
• Recommended Hitch Ball and Receiver for 2011 Chrysler Town and Country
  The best way to determine the correct rise you will be need will be to first install the Curt hitch. Then park your Town and Country van and the trailer on level ground. Measure from the ground to the top of the receiver opening on the trailer hitch. Then, with the trailer level, measure from the ground to the bottom of the coupler. If the coupler is higher, the difference is the amount of rise you will need. You can then go through our ball mount main page, linked for you, to find the...
  view full answer...
• How to Prevent a 12 Inch Receiver Hitch Extension From Rattling in Receiver
  Adding an extension introduces another component in between the receiver and the ballmount or hitch accessory. Because of this, getting a certain amount of wobble is unavoidable. If you're using the extension for a hitch mounted accessory, you can use an anti-rattle device like part # BX88224. However, keep in mind that using an extender will lower the tongue weight capacity of your hitch by 50 percent. If you'll be towing, you'd be better off using a longer ball mount, if the longer...
  view full answer...
• Installation Instructions for Curt C67ER for 2022 Kia Carnival
  If you click the provided link, you can see the installation instructions for the Curt # C67ER Class III hitch. If you'll be towing with the hitch, you'll also need a # CU94FR trailer wiring harness, a ball mount like # D-28 and a # PC3 hitch pin as well as # 19260 for a 1-7/8 inch trailer ball or # 63845 for a 2 inch ball.
  view full answer...

Do you have a question about this Trailer Hitch Ball Mount?