Trailer Hitch Recommendations for a 2008 Buick Lucerne Base Model, Special Edition, or Super

Updated 05/24/2011 | Published 05/23/2011

Products Featured in This Question

Curt Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4"

(75)

$238.39

1-7/8" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 2,000 lbs

(2621)

$16.53

2" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 3,500 lbs

(2621)

$17.55

Draw-Tite Drawbar for 1-1/4" Hitches - 3-1/8" Rise - 11-3/4" Long - 3,500 lbs

(2328)

$29.96

Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

(31)

$31.10

Pin and Clip for 1-1/4" Hitches - 1/2" Diameter

(895)

$11.49

Question:

is the lucerne special a v-8 engine and model cxs? mine is a v-6 and model cxl. is this the right hitch? thanks-

asked by: Michael B

Expert Reply:

In order to determine if your 2008 Buick Lucerne is a standard model CXL or a special edition, there are a couple of things you can do. If the driver seat is a power memory seat that remembers your settings and your tires are size 245/50R18, then you have a special edition. But the definitive way to determine the trim level of your Lucerne is to contact a local dealer and have them run the VIN number of the car and they will be able to tell you for sure which one you have.

The Curt Trailer Hitch, # C12044, is for any model that is not a Super or Special Edition. I have included a link to the installation instructions for you to view.

If you do have a Super or Special, we don't currently have a hitch that fits.

If you can get a hitch installed, then I recommended ball mount is # 36063 and you can use pin and clip # PC2. For a ball you can use # 19256 (1-7/8 inch diameter) or # 19258 (2 inch diameter). For trailer wiring use Curt T-Connector Vehicle Wiring Harness # 56047. I have included a link to the installation details for this harness for you to view.