Dexter Trailer Axle Beam with E-Z Lube Spindles - 89" Long - 5,200 lbs
(592 reviews)
Price: $283.09
Dexter Trailer Axle Beam with E-Z Lube Spindles - 89" Long - 5,200 lbs
Item # 8327820
Our Price: $283.09
In-stock alternatives that can ship today
- All Info
- Reviews (592)
- Q & A (0)
- Photos
Dexter Trailer Axles - 8327820
- 5200 lbs
- 89 Inch Long
- 74 Inch Long
- Spindles Only
- No Drop or Lift
- Leaf Spring Suspension
- No Hubs
- Dexter
- Easy Lube Spindles
Round trailer axle beam measures 89" from hub face to hub face (when hubs - sold separately - are mounted) and 74" from spring center to spring center. E-Z Lube spindles make it easy to lubricate bearings (sold separately).
Features:
- Round axle beam acts as part of your trailer's suspension system
- Replace an axle on your trailer
- Fabricate a suspension to fit your application
- High-strength steel construction
- Bend in axle creates zero camber angle for even road-to-tread contact across the width of your trailer's tires
- Best for straight-line acceleration and steady, controlled towing
- Underslung design - spring seats welded to underside of axle for mounting leaf springs (sold separately)
- Low ride height makes it easier to load and unload your trailer
- Straight, E-Z Lube spindles - no drop
- Built-in grease zerks for simple lubrication
- Spring seats, brake flanges, and spindles are welded on
- Made in the USA
Specs:
- Weight capacity: 5,200 lbs
- Hub-face-to-hub-face length: 89"
- Spring-center-to-spring-center length: 74"
- Tubing outer diameter: 3"
- Bearings (sold separately):
- Inner bearing: 25580
- Outer bearing: LM67048
- Brake flange configuration: 5 bolt
- Limited 5-year warranty
Axle Dimensions
There are multiple ways to measure the length of an axle beam, but the hub-face-to-hub-face and spring-center-to-spring-center lengths are the most accurate. Hub face (A) refers to the length of the axle measured from the base of one wheel stud to the base of the wheel stud on the opposite side of the axle (when hubs are mounted on the beam).
The spring center (B) is the approximate width of your trailer. It is measured from the center of the spring seat on one side of the axle to the center of the seat on the other. This axle beam comes with the spring seats welded on.
If you are replacing your trailer's axle, you should be able to figure out which type you need by determining your trailer's capacity, the bolt pattern of your wheels, the brake type and the aforementioned lengths.
E-Z Lube Spindles Make Lubrication Simple
The E-Z Lube spindles on this axle are meant to work with E-Z Lube-compatible hubs to make lubricating your bearings quick and easy. Each E-Z Lube spindle has a zerk fitting on the end. And every E-Z Lube hub comes with a grease cap that has an easy-to-remove rubber plug. Just pop out the plug on the cap to access the zerk on the spindle. When you inject grease into the zerk with a grease gun, the grease will flow to both the inner and outer bearings of the hub, lubricating the bearings and forcing out old, ineffective grease. Once you see new grease beginning to be pushed out, you know that your bearings are fully lubricated. This means that you can lubricate the bearings without the mess of taking apart the entire assembly.
Dexters
Dexters are made of high-strength steel and come with spindles and spring seats welded on. The spring seats are attached to the underside of the axle so that the leaf springs (sold separately) can mount beneath the axle. The result of this underslung design is a trailer that rides a bit lower for quick and easy loading and unloading.
Each axle is manufactured to create a certain camber angle. This ensures that the angle of the wheels is correct for your towing needs. Because the primary concern when towing is maintaining controlled, in-line movement, each axle is made so that your trailer's tires will run along the pavement evenly, with contact across the width of the tread. The result is excellent straight-line acceleration for steady, in-line tracking. You might notice the bend near the center of the axle; this is what ensures the proper camber angle. Having the center ride a bit higher and the sides of the axle bent lower allows the axle to give just enough to compensate for the load.
8327820 Dexter Replacement Axle Beam - Easy Lube - 89" Hub Face - 74" Spring Center - 5,200 lbs
Customer Satisfaction Score:
92% were satisfied with this product
8% of customers were not satisfied
- Wrong item was ordered
- Arrived Damaged
- etrailer mistake
Customer Reviews
Dexter Trailer Axle Beam with E-Z Lube Spindles - 89" Long - 5,200 lbs - 8327820
Average Customer Rating: 4.8 out of 5 stars (592 Customer Reviews)
Round trailer axle beam measures 89" from hub face to hub face (when hubs - sold separately - are mounted) and 74" from spring center to spring center. E-Z Lube spindles make it easy to lubricate bearings (sold separately).by: Raymond 07/11/2021
ordered a trailer axle and had it in 2 days. excellent place to get trailer parts
by: Robin 10/21/2021
Extremely happy with the product and the speed that it was received
by: Chris Bozied01/13/2021
Good price and service very helpful if I had any questions
by: Chris 01/25/2022
Worked as expected. Great product
by: Logan05/03/2023
by: Jesse 07/13/2021
Good quality axle and price is very good
by: Todd 01/22/2023
by: Raymond 07/28/2021
very fast
by: Brody 08/10/2022
by: House,09/01/2022
by: Roy08/20/2023
Review from a similar EZ Lube Axle in Trailer Axles
The axles were missing studs that fell out during shipping. Also, no nuts were included for mounting the brakes.
Comments
Oh no! I am sorry to hear that. I will have our customer service team reach out to you about this!
-- 
Brooke M - 08/28/2023by: DGan05/01/2022
Review from a similar EZ Lube Axle in Trailer Axles
It has been a year. The axle has preformed flawlessly. 5-star because it exactly matched the existing axle for bearing seal part and brake assembly which were moved from the existing lippert 5200# axle to this one. This 6000# axle provides a bit of margin for weight over the existing.
Comments
Still working well. Double thumbs up.
DGan - 05/12/2023by: Ryan05/26/2022
Review from a similar EZ Lube Axle in Trailer Axles
Awesome results. I purchased with new leaf springs and hardware. Very solid. I imagine that most of you struggling failed to research and measure properly. Take responsibility and own your results.
Comments
The axle, springs, and hardware has given me 0 issues. The 14 angle iron trailer frame will bend before the axle does.
Ryan - 05/27/2023by: Ronald 07/14/2022
Review from a similar EZ Lube Axle in Trailer Axles
I have had this axle on my trailer for a year now and could not be happier with it. Customer service was great dealing with them. I would highly recommend getting items for your trailer from here.
Comments
The axle I bought for my trailer has been perfect and I have not had any issues with it. I highly recommend this axle
Ronald - 07/15/2023by: David04/24/2023
Review from a similar EZ Lube Axle in Trailer Axles
Fast shipping
This is the 4th large item I’ve purchased, first 3 went without a problem.
This one came just as fast, but the rubber protection was off the ends so there is surface rust and the lock clip was a little damaged, 2 studs for the backing plate were missing, nothing that could not be fixed or replaced. But this was probably the shipper.
Item to large to worry about shipping back.
Comments
To be honest I would say that this does happen time to time in shipping. I will have our Customer Service team reach out to you.
-- Jenny N - 04/28/2023by: John 06/13/2023
Review from a similar EZ Lube Axle in Trailer Axles
Dexter axles fit perfectly, packaged nicely take care not to cut the pre wired axle, came with the spindle nuts and washer overall I got more than I bargained for, good value
by: Road Toad Trailers11/08/2022
Review from a similar EZ Lube Axle in Trailer Axles
We install these axles on our trailers for years and they have worked well without any problems.
by: Kenneth11/04/2017
Review from a similar EZ Lube Axle in Trailer Axles
Axle arrived in perfect condition, was also an exact fit for my Top Hat Trailer.
Your staff was of great help finding my right axle.
I would recommend etrailer to everyone.
Comments
Axle is working out great. Easy to install, fit perfectly.
Kenneth - 11/04/2018by: Mike B.11/14/2016
Review from a similar EZ Lube Axle in Trailer Axles
I inherited an aluminum trailer that ended up needing a complete overhaul and etrailer was the best resource I could have found. After researching extensively to find out what I needed and watching their videos on how to do it I ended up ordering an EZ-lube axle, galvanized hubs, springs and a hanger kit (in other words everything from the frame down).
Everything shipped quickly and arrived in great shape. All the parts worked perfectly and I couldn't be happier!
by: Joe 06/16/2023
Review from a similar EZ Lube Axle in Trailer Axles
I have been dealing with etrailer for years. They are great. I would give them five stars for their customer service. The Dexter axle is the reason for the four stars only issue I have with it is they don't use heavy enough wire through the axle for the brakes. The connections always burn through once they get hot. I end up running a piece of number 14 wire over the axle to connect the brakes
by: George M.09/08/2019
Review from a similar EZ Lube Axle in Trailer Axles
etrailer had the best prices and excellent customer service, Thanks Ian! Shipping was fast and free to boot. I bent the front axle on my in-laws fifth wheel camper and this axle fit the bill. I had to order a set of spring seats and weld them to the opposite sides. The original seats were at 68.5 " centers and that configuration was unavailable anywhere.
by: Bill 06/03/2023
Review from a similar EZ Lube Axle in Trailer Axles
The axel was received in excellent condition. After measuring twice I welded the spring pads on. It now sits in the rafters of garage. Dexter sent me a complete axel and spring assembly 2 days later that they said they would not. I now have a spare to take with me to Alaska next month.
by: Dean 08/02/2023
Review from a similar EZ Lube Axle in Trailer Axles
Shipping time was great! The only problem was the bottom plate hole spacing for the U-Bolts was not wide enough for my springs. I used the old plates and all went together fine.
by: Bill 08/13/2022
Review from a similar EZ Lube Axle in Trailer Axles
Fit right on came very timely
Trailer back on the road again
Comments
Axle been on a car trailer seen lot of miles and several states , no problem at all
Bill - 08/15/2023by: Kevin06/22/2019
Review from a similar EZ Lube Axle in Trailer Axles
Perfect fit, nice axle and fast delivery. I liked it so much I ordered another a day later to replace the front axle. My 30 yr old tandem trailer's axle broke at the wheel, so I went to a local store which doesn't stock them anymore. Could of ordered a so so axle for $94 + $28 shipping and wait 2 weeks but needed it fast. I went to a major trailer sales & service shop and told "maybe we could get one for $250" with no call back. I decided to check out etrailer and was surprised to see Dexter axles that fit my trailer for $140 with FREE shipping in 3-4 days! Ordered Sat. night, got it Wednesday afternoon, and installed it (with brakes) in an hour. Only problem I had was determining if spindles would fit my hubs. They stated "1/16th spindle" and must be industry talk but french to me. So I had to look up bearing #'s they listed to check bearing sizes to make sure they fit my hubs. A little more time but not a deal breaker. The best part was the huge difference in ride with just one new axle. Always had bouncing loaded or not, but now with just one axle the ride is smoother no load and with my 4000 lb tractor on it. Can't wait to get the 2nd axle on that arrived today. First two pics show the difference between the old straight axle and the new dexter axle. The third is a pic of my 2nd axle, oh well. Etrailer is my new go to place for trailer parts. I have 7 trailers.
25
592
Show More Reviews
See what our Experts say about this Dexter Trailer Axles
- What Type of Trailer Axle is a 8974 and How to Pick Out ReplacementThe numbers you mentioned from your axle indicate it's an 89 inch long axle with 74 inches between springs seats measured on center. Luckily that's a very common size that we have options for. I attached a link to them on this page for you to check out. You'll want to know the capacity you need as well. For example, the part # 8327820 is a 5,200 straight axle with straight spindles.
view full answer... - How Can I Increase My Enclosed Trailer Maximum Payload Weight Capacity?When it comes to an axle weight rating of 3,500 pounds, the gross weight of the vehicle cannot exceed that weight rating by any circumstances. The only way to increase the payload weight is by installing new axles. Although, you must also consider the weight capacity of the frame and floor construction when making this decision. For that reason, I strongly recommend reaching out to your trailer manufacturer to make that determination. If you can confirm that you can increase the axle...
view full answer...
- Could Dexter 5,200 lb Trailer Axle 8327820 Fit 1997 Jayco TrailerThere is a chance the Dexter trailer axle part # 8327820 will work with the other Dexter 5200 lb trailer axle on 1997 Jayco but not all 5.2k Dexter axles are made to the same length. This axle is 89 inches from hub face to hub face and also has 74 inches between the spring seat centers. If you can measure you current axle and verify that it is same as what you have now this axle will work great for you. If you have a different set of dimensions let me know and I'll see what you may need.
view full answer... - Recommended Axle To Replace Older AL-KO T44 With Discontinued Braking AssembliesI have a replacement option for you, but unfortunately the AL-KO braking assemblies # K23-538-00 and # K23-539-00 have been discontinued after AL-KO was bought out by Dexter. The best option would be to replace your current axle with one that uses standard brakes to allow you to find replacement brakes now and in the future. Since we do not have any 4400lb axles, I recommend using 5200lb axles as a replacement. We offer the Dexter Trailer Axle w/ Electric Brakes - E-Z Lube - 6 on 5-1/2...
view full answer...
- Why Aren't Trailer Axles Made Totally Flat without a Bow in ThemThey put a slight bow into trailer axles so that when they have weight on them the camber angle for the wheels/tires isn't bad. Basically the axle slightly flattens out with weight so that you get the correct camper angle. Your choice would be to order an axle in the over/under configuration you need or installing an over/under kit if needed. If the brake shoes are upside down they'll still work fine but if you have a left side assembly on the right side of a trailer or vice versa you'd...
view full answer... - Replacement 6 on 5-1/2 Inch Trailer Hub with 15123 and 09067 BearingsI took a look through our available selection of hubs/drum and none of them have the bearing numbers you provided. Therefore, the only option we can offer you is a replacement axle. If this is something that you would be interested in then the first thing we need to do is measure the axle you have now. The first measurement you will need to take is from the end of each hub face and then from the center of each spring seat. Once the length measurements are acquired we can then measure the...
view full answer...
- Availability of 5,200 lb Trailer Axle with 74 inches Between Spring SeatsTo pick out replacement axles you need a few pieces of info. You need the capacity like you mentioned, you need the hub face to hub face dimension and you need the spring seat to spring seat dimension as well. With that info you can determine what you'd need. For example, if the 74 inch dimension you listed was from the spring seat to seat dimension and you needed 89 inches from hub face to hub face you'd want the # 8327820-EB which comes with hub/drums and brake assemblies.
view full answer... - How Much Does the Dexter 5,200 lbs Axle w/ 6 on 5-1/2 Electric Brake Hubs Weigh?The Dexter Trailer Axle w/ Electric Brakes - E-Z Lube - 6 on 5-1/2 Bolt Pattern - 89" - 5,200 lbs item # 8327820-EB weighs 154 lbs.
view full answer... - Replacement Trailer Axle for Lippert Axle V000416795The Dexter Trailer Axle w/ Electric Brakes # 8327820-EB will work for you but you should note that it is one inch shorter from hub face to hub face so as long as you have at least 1-12 inches from your inner sidewall to the frame of your trailer this wouldn't be an issue at all. Most likely you are totally fine though.
view full answer... - Could Spring Seat of Dexter Axle be Moved to Fit New ApplicationThe Dexter axle part # 8327820 could only fit your trailer if you installed new spring seats on it since it has spring seat centers at 74 inches and your trailer has them at 71.5. For new spring seats you'd want the # TRSS300 welded at the correct distance. Aside from that the overall length and capacity would be fine for your trailer.
view full answer...
- Determining Correct Axle To Upgrade Single 3500lb Axle Boat Trailer To 5200lb AxleSince you have a single axle that is rated to 3500lbs, and the combined tire rating is also 3500lbs, I do not recommend using the trailer as it is with the weight of the trailer and boat being 4400lbs. Before making any changes I recommend verifying the maximum weight capacity of the trailer with the manufacturer, as just changing the axles and suspension may still not give you the weight capacity you need. If your trailer does have a high enough weight capacity for the weight you mentioned,...
view full answer... - AL/KO 5200 lb Axle ReplacementWe offer some Dexter axles that might be a good replacement. You'll need to measure the hub face to hub face and spring seat to spring seat dimension of your current axle to see if what we offer is compatible. I've provided a diagram showing how to take that measurement. All the axles I'm showing you use spindles compatible with 25580 inner/LM67048 outer wheel bearings. For a 95 inch hub face and 80 inch spring center, use # 6340624-EB which includes hub/drums with 6 lug on a 5-1/2 inch...
view full answer...
- Recommended Replacement 5,200 lb Axle with 89 Inch LengthTraditionally it is not a 5,000 lb axle but rather a 5,200 lb axle. There are two 89 inch hub face to hub face options we carry, they both have 74 inch spring seat centers, but one comes with the electric brakes and hubs and the other is just the axle. If you will use electric brakes, I recommend going with the Dexter Trailer Axle w/ Electric Brakes - E-Z Lube - 6 on 5-1/2 Bolt Pattern - 89" - 5,200 lb # 8327820-EB. If you will use hydraulic brakes then I recommend instead using the...
view full answer... - Recommendation for Upgrading Brakes on Tow DollyI do not have enough information to know what you have and if that old most likely will be challenging to locate replacement parts. My suggestion is to remove and replace the entire axel assembly. I suggest trying to first identify the current axel weight rating and manufacturer by looking for markings on the axel itself. We can help with hydraulic drum brakes such as the Hydraulic Trailer Brake Kit - Left/Right Hand, 3,500 lbs., # AKFBBRK-35 and complete axle kits with electric brakes,...
view full answer... - Recommended Axle To Replace Older AL-KO 4400lb Axle # 402268I have a replacement axle option for you, but based on the information I was able to find on your AL-KO 4400lb Axle # 402268 it uses an older style of braking assembly that was discontinued when AL-KO was bought out by Dexter. If the brakes on your trailer are unusable the only option is going to be to go ahead and replace the axle to one that uses modern braking assemblies. Since we do not have any 4400lb axles, I recommend using 5200lb axles as a replacement. We offer the Dexter Trailer...
view full answer...
- Overall Length of etrailer Trailer Axle Beam # e55GR & Dexter Trailer Axle Beam # 8327820Both the etrailer Trailer Axle Beam # e55GR and Dexter Trailer Axle Beam # 8327820 are 95-3/8" long from tip of grease zerk to tip of grease zerk. Both axles also share the same hub face of 89" and spring center of 74".
view full answer...
- Correct Kodiak Disc Brakes For 5,200 lb Dexter Trailer Axle BeamThanks for reaching out! The Kodiak Disc Brakes # KOD69FR you were looking at will definitely work with the 89" Dexter Trailer Axle Beam with E-Z Lube Spindles # 8327820 for your trailer. The outer bearing part number is different but the inner dimensions are the same so these brakes will still fit just fine! Attached are some review videos for you to check out.
view full answer... - 5200 lb Trailer Axle With 70 Inch Spring CentersAlthough we don't offer a 5000 lb axle, we do offer 5200 lb axles that might work for you, depending on the hub face to hub face dimension you're needing. We offer Dexter axles with an 86-1/2 inch hub face to hub face dimension and 71-1/2 center to center spring seat spacing that could work for you, but you'd need to remove the existing spring seats and tack new ones in place using part # TRSS300 at a 70 inch center. If an 86-1/2 inch hub face would work for you, we offer the following: •...
view full answer... - How To Upgrade to a 5,200 Lb Axles On a TrailerIn order to find the correct replacement axle you have a few options. The first option would be to simply measure the axle you have now and record both the spring center and hub face measurements. The other option would be to look at the axle tag and read the hub face (HF) and spring center (SC) measurements off of this as it should be listed for you here using these aberrations. The final option would be to record the serial number and get in contact with the axle manufacturer. I would...
view full answer... - Does the 5,200 Lb Dexter Trailer Axle 8327820-EB Come with Leaf SpringsThe Dexter Trailer Axle part # 8327820-EB does not come with leaf springs but we do offer these separately. If you can provide me with the length of your existing leaf springs I can then offer a recommendation. Otherwise, I have attached a list of options for you. The spring seats are installed under the axle tube but you can move these to the top with the Dexter Trailer Springs Over-Under Conversion Kit part # K71-385-00 if needed. The distance from the hub face to the center of the leaf...
view full answer... - Will the etrailer Hub AKHD-655-6-K Fit on Their Axle 8327820?As the Dexter Axle # 8327820 uses an inner bearing # 25580 and the outer bearing has an inner diameter of 1.250", the etrailer Trailer Hub and Drum for 5,200-lb and 6,000-lb Axles # AKHD-655-6-K will definitely fit.
view full answer... - Over-Under Conversion Kit for 3" Dexter AxleYou can absolutely use the Dexter Trailer Axle w/ Electric Brakes # 8327820-EB and put them below your leaf springs. What you need to do is use the Trailer Springs Over-Under Conversion Kit # K71-385-00, so long as you have double-eye leaf springs; which will then be on top of the axle like you wanted.
view full answer... - Trailer Axle Options that are 89 inch Overall Length and 74 inches Between Spring Seat CentersIf you matched your current dimensions like with the part # T3584F-EZ-8974 you'd have the same clearance you have now which seems to be working for you. This is a 3,500 lb trailer axle. For a higher rated option we have the part # 8327820 which is a 5,200 lb trailer axle.
view full answer... - Replacement Trailer Axle With 89 Inch Hub Flange To Hub Flange MeasurementIn order to replace your trailer axle you can use the Dexter Trailer Axle Beam with EZ-Lube Spindles part # T3584F-EZ-8974 for a 3,500 lb capacity, part # 8327820 for a 5,200 lb weight capacity, or part # 8327830 for a 6,000 lb weight capacity. These axles all have the correct hub face measurement but you will need to have the spring seats moved to match that of those on your trailer. Based on the measurements that you provided of your stud centers, you have a 5 on 5-1/2" bolt pattern....
view full answer...
Do you have a question about this Trailer Axle?
Info for this part was:
Edited by:
Lindsey S
Installed by:
Jeff D
Expert Research:
Jameson C
Video Edited:
Chris R
Updated by:
Wilson B
Updated by:
Mike S
Written by:
Alexander C
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.