Replacement Straight Axle Spindles For the Lippert Axle On a 2019 K-Z Sportsmen Classic 180TH
Updated 11/10/2021 | Published 10/16/2021
Products Featured in This Question
Question:
I have a 2019 KZ 180TH. I have a lippert 5k axle with spindles. I would like to replace it with a straight axle like they use in the off road models. Would I be able to use a dexter straight axle and reuse my current lippert hubs and brakes and if so can you confirm witch axle I will need?
asked by: Jack B
Expert Reply:
I have an option that may work out for you as we do not have any axles that will have the same hub face dimensions as your Lippert axle in your 2019 K-Z Sportsmen Classic 180TH.
You can have your drop spindle that is currently welded on your Lippert axle cut off and replace it with a #42 E-Z Lube Spindle w/ Flange # TRU37FR straight spindle. This spindle has the same dimensions as your current Lippert axle so you will still be able to use your current hubs and brakes.
You can get the Bearing Kit # BK3-100 to replace your current bearings and seals which may be worn from use.
Product Page this Question was Asked From
Dexter Trailer Axle Beam with E-Z Lube Spindles - 89" Long - 5,200 lbs
- Trailer Axles
- Leaf Spring Suspension
- Standard Grade
- No Hubs
- 5200 lbs
- Spindles Only
- 74 Inch Spring Center
- 89 Inch Hub Face
- No Drop or Lift
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Dexter E-Z Flex Suspension Kit - Double-Eye Springs - Tandem Axle - 6,000 lbs
- Shop: Dexter E-Z Flex Equalizer Kit - Double-Eye Springs - Tandem Axle - 6,000 lbs
- Video: Checking Out the Replacement Dexter Bolt-On Shock Kit for 2-3/8" or 3" Diameter Axle
- Video: Breaking Down the Dexter Trailer Hub and Drum Assembly for 5,200-lb Axles
- Video: Lippert Heavy-Duty Replacement Shock Feature Review
- Shop: Camper Tie-Downs
- Q&A: Looking For Replacement For 013-143-03 Equalizer And Dexter Shocks On 2018 Cruiser 2916 RV
- Q&A: Recommended Replacement Seal For A Tri Tec T-23972 Seal
- Q&A: Replacement Hub and Drum Assemblies for AL/KO 8460 Hubs and Drums
- Search Results: sw6del
- Search Results: 814202
- Search Results: shock
- Search Results: trailer shocks
- Search Results: 052~003~00
- Search Results: 702096
- Search Results: 023~458~00
- Shop: Replacement U-Bolt with Nuts for 3" Round Trailer Axles - 1/2" Diameter
- Shop: Dexter Nev-R-Adjust Electric Trailer Brakes - 12" - Left/Right Hand Assemblies - 6K
- Shop: TorkLift Truck Camper Tie-Downs - Custom Frame Mount - Front and Rear
- Shop: Suspension Kit for Tandem-Axle Trailers - 1-3/4" Wide Double Eye Springs - 2-1/4" Links
- Shop: Dexter Trailer Hub and Drum Assembly - 7K E-Z Lube Axle - 8 on 6-1/2 - Pre-Greased - 1/2" Stud
- Video: Dexter E-Z Flex Equalizer Kit Review
- Video: Review of Lippert Trailer Suspension Parts - Equalizer Upgrade Kit - LC145546
- Video: Mount: Dexter E-Z Flex Suspension Kit on a 2021 Grand Design Imagine Travel Trailer
- Video: Comprehensive Review: Dexter E-Z Flex Suspension Kit
- Article: Trailer Wiring Diagrams
- Shop: Trailer Hitch
- Q&A: Best Suspension Upgrade for 33" Tandem Axles: Road Armor vs Dexter EZ Flex for Ember 22ETS
- Shop: Trailer Wiring
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
on Trailer Axles
Steven S.
11/8/2021
I have a drop axle on my trailer and the axle sits on top of the spring,is this correct, what I have seen is the drop axle mounted under the spring, I need ground clearance,would it be OK to remove the axle and install it under the spring, that would give me the clearance I need?