bing tracking image
  1. Trailer Axles
  2. etrailer
  3. 5200 lbs
  4. 89 Inch Hub Face
  5. Spindles Only
  6. 74 Inch Spring Center
Trailer Axle Beam with Easy Grease Spindles - 89" Long - 5,200 lbs
etrailer

Trailer Axle Beam with Easy Grease Spindles - 89" Long - 5,200 lbs

Part Number: e55GR
In Stock
$234.79
Trailer Axles
Add to cart
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Round trailer axle beam measures 89" from hub-face-to-hub-face (when hubs - sold separately - are mounted) and 74" from spring-center-to-spring-center. Easy Grease spindles make it easy to lubricate bearings (sold separately). Great Prices for the best trailer axles from etrailer. Trailer Axle Beam with Easy Grease Spindles - 89" Long - 5,200 lbs part number e55GR can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (209)
  • Q & A (0)
  • Photos

etrailer Trailer Axles - e55GR

  • 5200 lbs
  • 89 Inch Hub Face
  • Spindles Only
  • 74 Inch Spring Center
  • No Drop or Lift
  • No Hubs
  • Leaf Spring Suspension
  • etrailer
  • Easy Grease Spindles

Round trailer axle beam measures 89" from hub-face-to-hub-face (when hubs - sold separately - are mounted) and 74" from spring-center-to-spring-center. Easy Grease spindles make it easy to lubricate bearings (sold separately).


Features:

  • Round axle beam acts as part of your trailer's suspension system
    • Replace an axle on your trailer
    • Fabricate a suspension to fit your application
  • High-strength steel construction
  • Bend in axle creates zero camber angle for even road-to-tread contact across the width of your trailer's tires
    • Best for straight-line acceleration and steady, controlled towing
  • Underslung design - spring seats welded to underside of axle for mounting leaf springs (sold separately)
    • Low ride height makes it easier to load and unload your trailer
  • Straight, Easy Grease spindles - no drop
    • Patented welding process prevents spindle failure with 40% stronger welds
    • Built-in grease zerk for simple lubrication
  • Spring seats and spindles are welded on
  • CSA, QAI, and SAE-N certified
  • Lifetime technical support from the experts at etrailer.com
  • Made in the USA


Specs:

  • Weight capacity: 5,200 lbs
  • Hub-face-to-hub-face length: 89"
  • Spring-center-to-spring-center length: 74"
  • Axle diameter: 3"
  • Spindle/hub compatibility:
    • Bearings: 25580 inner, 15123 outer
    • Seal: GS2250-DL, inner diameter 2.25"
  • Limited lifetime warranty


Axle Dimensions

Hub Face and Spring Center Measurements on Standard Trailer Axle

There are multiple ways to measure the length of an axle beam, but the hub-face-to-hub-face and spring-center-to-spring-center lengths are the most accurate. Hub face (A) refers to the length of the axle measured from the base of one wheel stud to the base of the wheel stud on the opposite side of the axle (when hubs are mounted on the beam).


The spring center (B) is the approximate width of your trailer. It is measured from the center of the spring seat on one side of the axle to the center of the seat on the other. This axle beam comes with the spring seats welded on.


If you are replacing your trailer's axle, you should be able to figure out which type you need by determining your trailer's capacity, the bolt pattern of your wheels, the brake type and the aforementioned lengths.


etrailer Axles

etrailer axles are made of high-strength steel and come with spindles and spring seats welded on. The spring seats are attached to the underside of the axle so that the leaf springs (sold separately) can mount beneath the axle. The result of this underslung design is a trailer that rides a bit lower for quick and easy loading and unloading.


Each axle is manufactured to create a certain camber angle. This ensures that the angle of the wheels is correct for your towing needs. Because the primary concern when towing is maintaining controlled, in-line movement, each axle is made so that your trailer's tires will run along the pavement evenly, with contact across the width of the tread. The result is excellent straight-line acceleration for steady, in-line tracking. You might notice the bend near the center of the axle; this is what ensures the proper camber angle. Having the center ride a bit higher and the sides of the axle bent lower allows the axle to give just enough to compensate for the load.



e55GR etrailer by AxleTek Replacement Axle Beam - Easy Grease - 89" Hub Face - 74" Spring Center - 5,200 lbs





Customer Satisfaction Score:


Customer Reviews

Trailer Axle Beam with Easy Grease Spindles - 89" Long - 5,200 lbs - e55GR

Average Customer Rating:  4.7 out of 5 stars   (208 Customer Reviews)

Round trailer axle beam measures 89" from hub-face-to-hub-face (when hubs - sold separately - are mounted) and 74" from spring-center-to-spring-center. Easy Grease spindles make it easy to lubricate bearings (sold separately).

by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:


25
206
Show More Reviews

See what our Experts say about this etrailer Trailer Axles

  • Can I Upgrade 3,500 lb Axles to 5,200 lb Axles on a Budget
    Thank you for reaching out! The best thing for your situation is to go with the 3,500 lb Dexter Axle # T3584F-8974 you are looking at. While you can upgrade your axles to the 5,200 lb # e55GR, you won't really see a benefit from it unless you also upgrade your trailer suspension and then reinforce the frame so it can safely handle the extra weight of your cargo. When you toss in the fact that you're wanting to use the same equipment from your old axles that also helps clear things up...
    view full answer...
    Image 1 for Image 2 for
  • How do I Upgrade my Axles on 2017 Jayco Whitehawk 27DSRL Travel Trailer?
    Hello Ken. Thanks for emailing the pictures. I am sorry that your axles are causing you issues, replacing them that often should not be happening. I have a different option for you, after hearing about your Alaska trip in the email it sounds like you go on some pretty rugged roads which is well worth it for those amazing views, but as you can see it can be pretty rough on your axles. The Timbren Axle-Less Trailer Suspension - Heavy Duty - No Drop - 5 Bolt Flange - 3,500 lbs # TASR35HDS04...
    view full answer...
  • What Is The Difference Between 5,200lb Axle e55gr and 6,000lb Axle e23gr?
    Sure is! The only difference between the 5,200lb axle # e55GR and 6,000lb axle # e23gr is the wall thickness of the tubing. They both use the same spindle as it's actually the outer bearing and race in the hub that give extra strength and not the spindle diameter themselves. Since both of these axles are the same length, and same spring seat length, I'd just go with the 6k # e23gr for some extra peace of mind. This won't increase the capacity of your trailer if you originally had 5,200lb...
    view full answer...
  • Wall Thickness of 3,500, 5,200 and 6,000 lb Trailer Axles
    3,500 lb trailer axles like the # T3584F-8974 and # e38GR have a wall thickness of .16 inch whereas 5,200 lb axles like part # 8327820 and # e55GR have a wall thickness of .18 inch. 6k axles like the part # 8327830 also have a wall thickness of .18 inch.
    view full answer...
  • Availability of 5,200 lb Axle With Idler Hubs
    Although we do not have a version of the # e75SR that comes with idler hubs, we do have the parts needed to put this together. All you need is the # e55GR along with the Easy Grease Trailer Idler Hub # AKIHUB-655-6-EZ-K. This is pre-greased so it is ready to go. The hubs have a slightly higher capacity at 6k but they use the same bearings and grease seal so it won't hurt anything. You will still be limited by the 5,200 lb capacity of the axle.
    view full answer...
  • Overall Length of etrailer Trailer Axle Beam # e55GR & Dexter Trailer Axle Beam # 8327820
    Both the etrailer Trailer Axle Beam # e55GR and Dexter Trailer Axle Beam # 8327820 are 95-3/8" long from tip of grease zerk to tip of grease zerk. Both axles also share the same hub face of 89" and spring center of 74".
    view full answer...
    Image 1 for
  • Replacement 3 Inch Diameter Axle Beam with 95 Inch Hub Face Dimension
    An axle with a 3 inch diameter axle tube typically has a 5200, 6000 or 7000 lb capacity. The inner and outer wheel bearings would be the determining factor that would tell you the actual capacity. We do have 95 inch axles (hub face to hub face dimension) but none of our offerings have the proper spring seat spacing, so you'd need to add seats in the correct locations. • For a 95 inch 5200 lb axle with spindles compatible with a 25580 inner/LM67048 outer bearing, use # e55GR • For a 95...
    view full answer...
  • Can 89 Inch Axles With 74 Inch Spring Centers Fit 74-1/2 Inch Spring Center
    You'll be perfectly fine going with a 74 inch spring center to spring center axle with 74-1/2 inch spring center. That said we don't have 64 inch hub face to hub face axles with 74 inch spring centers, only 89 inch hub face to hub face and 74 inch spring centers. There are a few different options depending on the axle capacity you need: - 3,500 lbs: Trailer Axle Beam with Easy Grease Spindles # e38GR - 5,200 lbs: Trailer Axle Beam with Easy Grease Spindles # e55GR - 6,000 lbs: Trailer...
    view full answer...
  • Lippert Center Point and Electric-Over-Hydraulic System for a 2017 Dutchman Voltage 3005
    The closest axle that we have to what you're needing is the Trailer Axle Beam with Easy Grease Spindles # e55GR rated for 5,200 lbs. This has an 89" hub-face measurement and a 74" spring-center measurement which is really close to what you have but slightly off so I recommend having a shop custom-order one for you to make sure it matches up directly. For the Lippert Center Point you need the kit # LC1565401 which is their setup for triple axle trailers (which is what I'm seeing for your...
    view full answer...
  • Replacement Trailer Axle Option for 1999 Triton Boat Trailer
    The best match replacement we have for your trailer is the Trailer Axle Beam with Easy Grease Spindles part # e55GR which has an 89" hub face, 74" spring center, and 5,200 lb weight capacity. The hub face is longer than what you have but only by an 1" so the wheels and tires will stick out about 1/2" more per side. The spring centers don't match up either but you can move these inward by cutting the old ones off and tack welding them where you need them. If you need a higher capacity, this...
    view full answer...
  • How to Measure for Adding Lippert Bolt-On Shock Kit for 3 Inch Axles to Trailer
    If you're upgrading to a 5,200 lb 3" axle and you're planning on placing it under the leaf springs then you need the Lippert Bolt-On Shock Kit w/ Heavy Duty Gas Shocks # LC281281. The full instructions have been linked to this answer page for you to reference but I've cut out the part of the instructions that has to do with determining where to place the mounting bracket for the shocks on the trailer frame. The "4A + 2" measurement is going to come out to 11-1/16" + 2" so that will be 13-1/16"...
    view full answer...
    Image 1 for Image 2 for Image 3 for
  • Replacement Spindle/Axle Option For a 4,500LB Mobile Home Axle
    The #42 E-Z Lube Spindle w/ Flange # TRU37FR is going to be the best option for replacing your spindle on your mobile home axle. Do remember that mobile home axles were never designed for continuous use and are not as structurally strong as a Axle # e55GR. This particular axle has the same #42 spindle and a 89" hub face to hub face measurement. We do offer the Dexter Trailer Hub and Drum Assembly # 8-174-5UC3 which has the 5 spoke utility mounting holes like the Dexter 8-222. You will need...
    view full answer...
  • What Parts Do I Need To Upgrade From 3,500 lb Axle To 5,000 lb Axle?
    Hello Jbryan, thanks for reaching out. I can certainly point you in the right direction. There are a few things we will want to look at here in order to be sure you get the right parts. Mainly I will need to know the hub face length and spring center length of the current axle. It is possible to upgrade the capacity, but the new axle will need to be identical in length to the current axle. For example, the Trailer Axle Beam # e55GR is 89" long overall and has a 74" spring center as you...
    view full answer...
  • Replacement for Dexter 8-222 Hubs
    Hi Alejandro; the Dexter 8-222 was used on mobile home axles. These are designed for one time use and have a bearing and grease seal combination that doesn't match any standard. This means you will have to replace the axles to get it back up and running with a 6 lug wheel. To find the right replacement axle you will need to know the capacity as well as the length measured hub face to hub face. See the video below which shows how to measure. For the capacity, try checking for an axle tag...
    view full answer...

Do you have a question about this Trailer Axle?


Info for this part was:

Employee Lindsey S
Edited by:
Lindsey S
Employee Jacob T
Video by:
Jacob T
Employee Chris R
Video Edited:
Chris R
Employee Leah S
Updated by:
Leah S
Employee Wilson B
Updated by:
Wilson B
Employee Kristina F
Updated by:
Kristina F
Employee Carrie F
Updated by:
Carrie F
Employee Conner L
Installed by:
Conner L
Employee Michael B
Installed by:
Michael B
Employee Mike S
Written by:
Mike S

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-940-8924