Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
This universal, right-angle bracket is designed for mounting the Pollak 7- and 9-pole trailer connectors to your towing vehicle. Black, zinc-plated bracket mounts under rear bumper of truck or SUV. Mounting hardware included.
Features:
Specs:
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
Ratings & Reviews
Fits great with the Curt 7pin harness
Perfect fit. Great customer service!!!
Just the right part for the job! Perfect fit for my 7-way harness and on my draw-tite hitch!
Does what it's made to do, hold the cable receiver and mount to a vehicle. I tossed the plastic screws/nuts, as they strip with merely finger tightness. Go to a hardware store and get a set of stainless and they won't rust either...LOL
This product was easy to install and looked good for a month before the hardware started rusting badly. Replaced with Stainless Steel hardware and will see how it goes. Bracket still looks decent and is not rusting after a year.
Product went together as described and when attached to the short no drill mount bracket provided a sturdy mount for the 7way plug.
The two screws used to attach the mounting bracket to my vehicle were much to small. Not a problem and certainly not enough to give anything but an excellent rating.
It rusted out within 2 months
Although this bracket comes with tapping screws to mount to a metal undersurface structure, it only has 4 screws for the 7 point hitch device to screw into it and no additional screws to mount to the hitch itself. It should come with 6 locking screws for that purpose. I had to use 2 to mount it to the hitch and 2 to mount the 7 point hitch device into the bracket, leaving 2 spots open. I went to my local hardware store and autozone and couldn’t find these exact screws and etrailer doesn’t sell them as a separate order.
Works great. I mounted the plug upside down for clearance purposes because I wanted it up higher and tucked up a bit more. Couldn't achieve that if the plug opened upwards.
Bought for a 2018 Nissan Frontier. Fit the wire plug perfectly and the Screws and nuts to secure the plug to the bracket were fine. The two screws to attach the bracket to the vehicle were way too small to use. They wouldn't work on the mounting tab on the Draw-Tite hitch or the factory holes under the bumper. I suppose if your creating new holes they would be okay. Appears to be a quality piece and I'm very satisfied with it.
The self tapping screws seemed a little small so I used some bigger ones.
works great, need to unplug the 7 pin connector to install.
It was suggested I purchase this bracket to assist in mounting my 7-way trailer harness (item #118253) to my 2010 Honda pilot. When I tried to attach the bracket underneath and behind the bumper, I discovered it was too tall and very difficult to fit where it was required. I also found that the bracket is a 90-degree bend and will not go flush against the bumper wall. The bumper wall runs at an angle and you would need a bracket with an approx 35-degree angle to fit flush against the bumper, that's important if you want a professional clean looking mounting of the trailer harness (7- way insert) like I installed (see attached pics). So forget this bracket, Just save your money and mount onto the bumper wall, plenty thickness and you get a clean look...Maybe one day they will make the proper bracket for such an installation...
My F150 had an OEM 4 pin trailer plug and hitch.
The 118242 - 7 pin connector with wiring harness is the ticket. The hardest part of the install was dropping the spare tire. The plugs connect directly to the factory plugs and the harness length is the correct length.
The 3035-P brake controller connector harness was just as easy. Plugs right in to the OEM plug next to the ECM connector and the other end into the brake controller.
The PK12711U-26 - 7 pin bracket and hardware kit fastens directly the OEM bracket that is on the hitch. My truck had an OEM 4 pin trailer towing set up with the hitch. The OEM hitch had the bracket welded on it to attach the 7 pin mounting bracket to it.
These kits make this install very easy and professional looking.
If I have one complaint, the hardware kit to attach the 7 pin connector bracket is set up to fasten the bracket directly to the bumper with 2 - self tapping screws provided in the kit. The kit also includes 4 #12 machine screws with toothed washer nuts to attached the 7 pin connector to the bracket. This is fine if your truck hitch doesn't have an attaching bracket welded to it. The kit should included in it 6 #12 machine screws and nuts along with the 2 self tapping screws. Since my OEM hitch actually had a bracket welded to it to attach the 7 pin bracket to it, I had to use two other #12 screws and nuts to attach the 7 pin bracket to the OEM bracket on the hitch. Not a big deal, just a thought.
It took me about 2 hours, start to finish to install the 7 pin connector, trailer controller, and add the two relays in the OEM relay/fuse box under the hood.
I highly recommend these kits.
The tow package I purchased last year, fits great and installed perfectly. It works perfectly with my electronic under-dash brake controller.
The kit came with everything that I needed and instructions were easy to read I had the entire kit installed in about 40 minutes it's work Flawless for me for over a year and I tow a variety of trailers the plug is never failed due to workmanship it is still water tight.
The receiver cap spring still has excellent tension to help hold the plug into place, the only gripe I have is that I should have installed stainless mounting screwswhen I installed the kit because the mounting starting are starting to rust a little, but that's my oversight and is nothing to do with the kit and its ability to provide flawless service.
I highly recommend this product if you're like me and was looking for an oem Plug and Play setup!
5 stars!
Does the job and simple install since my hitch had a predrilled mounting tab. 4 screws to install the plug were included but I wish it came with two small bolts, nuts, and lock washers to install the bracket to the mounting tab.
Easy to install perfect for 7pin plug.
The product itself is great, but the hardware (screws, nuts, etc) is trash. Should be stainless steel. Keep in mind, it doesn't include hardware to fasten to the frame of your vehicle. I used the hardware from another kit here on etrailer. I initially ordered the incorrect bracket.
I had it installed for literally one week. No snow or ice, and it looks like I dropped the thing in the ocean for a month.
This fit my wiring perfectly I’m glad there was an option. My plug was a Pollack.
I like that it came with all the mounting hardware. Self-drilling tech screws (2) , and machine screws nuts and lock-washers (4 each).
Needs 6 black screws. 2 to mount to the hitch and 4 to attach connector to bracket.
Bad idea. The only reason for the 1 star review is that it hangs way too low and will rip right off with any small “off roading.” Mine ripped off day 1 on a slightly rutted logging road to my property that isn’t even that rugged. I’d be worried just going down a forest road into a campsite if there’s a small ditch. A better solution unless you never leave pavement is to just drill a hole through the metal and get the appropriate mount for that.
Great fit! I didn't like the mounting screws that came with it, so I drilled the mounting bracket holes bigger and used two bolts with nylon lock nuts to secure it to the hitch. It was easy; it added two minutes to the install - total time to install the bracket was 5 minutes.
Gotta have this bracket to mount your 7 pole connector to. But I had a place to attach to on my Draw-Tite hitch and didn't need the self tapping screws, HOWEVER, I needed two additional black screws to attach the connector bracket to the hitch spot. Should come with (6) black screws and two self tappers. I have to go find two additional black screws if able to attach the bracket to the hitch hangar. That's why i didn't give it five stars.
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.
Brooke M.
4/9/2025
Tom, these photos are awesome! Thank you so much for sending them in -- and I really appreciate your honest feedback on what would have made this better!