bing tracking image
Q & A Icon

Do Your etrailer Hitches Include A Mounting Bracket For My Trailer Connector?  

Updated 10/06/2026 | Published 10/01/2026

Question:

Your trailer hitch e98850, does it come with an electrical plug holder or mounting hardware? Like the PK12711U and EZ connector 319-S7-12 or do I add these products? Thanks

0

Expert Reply:

Hello Steve,

Welcome to etrailer, I'm glad you found us!


You will need to add the Pollak Mounting Bracket # PK12711U separately. The etrailer Trailer Hitch Receiver # e98850 does not include the electrical connector or a mounting bracket for it. It does come with all of the hardware needed to install the hitch itself.

The Replacement Self-Closing Plug Holder for EZ Connector Trailer Connectors # 319-S7-12 is a replacement for the trailer end for a specific EZ plug.

I also confirmed the # e98850 is the correct hitch for your 2011 Toyota Tacoma. It is designed for Tacomas without the factory-installed hitch.

If you need wiring for some light towing or a hitch-mounted accessory, you will want the Curt T-Connector Vehicle Wiring Harness # C55513. This will give you a 4-way flat connector at the back of your Tacoma. If you plan on towing a trailer with brakes, you will also need our Universal Installation Kit for Trailer Brake Controller # ETBC7. This is a kit we put together here in-house that will give you both a 7-way RV connector and a 4-way flat and provide the wiring needed to install a brake controller.

If you do need the # ETBC7 then you will not need to purchase the # PK12711U because it will come with one.

What are you planning on towing with your Tacoma? Do you still need a ball mount and brake controller?

expert reply by:
0
Kate F
Duane M. profile picture

Duane M.

10/2/2026

I saw a YouTube video on this new 7-pin connector and it made a lot of sense to me vs the traditional 7-pin. I’ve had over the many years had to clean up the contacts to ensure they were making a good connection. With this new 7-pin design of which I have been using for 5 years now.. not one issue .. that’s my .02. Well worth it

Kate F. profile picture
Etrailer Expert

Kate F.

10/6/2026

@DuaneM Thanks for the response Duane, I am happy to hear you have been issue free for 5 years now.
Steve P. profile picture

Steve P.

10/3/2026

In the video from Rob @ 3:17 he mentions a bracket? I believe that’s the bracket I need, and fyi as I mentioned earlier the trailer hitch rusted out on me so I will be installing the original bumper if possible. Thanks again Steve

Kate F. profile picture
Etrailer Expert

Kate F.

10/6/2026

@SteveP My apologies, Steve. I see which bracket you are referring to now. That is the OEM support bracket, and you will need to reach out to Toyota for a replacement. Sorry for the confusion!

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>