Optronics Trailer Lights
- STL211XRFHB
- Tail Lights
- Oval
- LED Light
- Red
- White
- 7-1/2L x 3-1/4W Inch
- Surface Mount
- Backup
- Stop
- Tail
- Turn
- Submersible Lights
- Optronics
7-1/2" x 3-1/4" Oval. Waterproof light serves 4 functions: brake, tail, turn, and backup light. Red lens is set inside of clear lens. Mounts on surface of trailer with built-in flange - hardware not included. 4-Wire pigtail. 16 Diodes.
Features:
- Oval trailer tail light serves 4 functions
- Stop light
- Tail light
- Turn signal light
- Built-in backup light eliminates the need to cut holes in your trailer for 2 lights
- Sonically sealed, waterproof housing and lens unit is submersible
- Durable surface-mount technology (SMT) construction of LED circuit board
- Better withstands shock and vibration
- Allows improved heat distribution and thinner construction
- LEDs make great replacements for incandescent lights
- Last 50 times longer
- More efficient - provide brighter light with less power output
- No bulbs to replace - no brittle filaments
- Durable polycarbonate lens and housing
- Red lens set inside white lens with red and white LEDs
- Red lens with red LEDs for tail light
- Clear lens with white LEDs for backup light
- Mounts on surface of trailer with built-in black flange - hardware not included
- 4-Wire pigtail
- White wire for ground
- Brown wire for backup light
- Red wire for brake light
- Black wire for tail light
- DOT compliant
- Meets FMVSS 108 and CMVSS 108 requirements for automotive lighting
Specs:
- Overall dimensions: 7-1/2" wide x 3-1/4" tall x 3/4" deep
- Light face dimensions: 6-1/2" wide x 2-1/4" tall
- Wire length: 8"
- Diodes: 16
- Power draw at 12.8 volts:
- Stop/turn light: 0.265 amps
- Tail light: 0.24 amps
- Backup light: 0.3 amps
- Lifetime warranty on LEDs
![Optronics STL211XRFHB Fusion LED Combination Tail Light Diagram]()
Sonically Sealed, Waterproof Trailer Light
The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer. The housing and lens are sonically sealed together to create a single unit, which means that water will not get into the light and damage the diodes or circuit board.
Surface-Mount Light
![Surface mount light]()
Surface-mount lights install flat against the surface of the trailer, so a hole does not need to be cut into the trailer for the light. This type of light is installed using a flange or bracket that has mounting holes. And mounting hardware is used to secure the light to the trailer.
STL211XRFHB Optronics Fusion Combination LED Trailer Taillight w/ Built-In Reverse Light - 16 Diodes - Red/Clear Lens
WARNING: This product contains chemicals, including lead, known to the State of California to cause birth defects or other reproductive harm. Wash hands after handling. For more information, go to www.p65warnings.ca.gov.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.