Submersible Trailer Taillight with Stop, Tail, Turn and Backup

Question

Question:

Hello, I am looking for trailer lights, brake,turn,reverse, running, all in 1 waterproof housing. the trailer is about 15 ft from tail light to hitch. I am finding garbage available on AMAZON. Hoping you have some choices. cheers David

asked by: David

0

Expert Reply:

Hey David, so I attached a link to all of the submersible lights we offer that have white and red lenses as that would cover everything you mentioned. For a surface mount we have the part # STL211XRFHB or part # OPT37FR or for something that is recessed we have the part # STL211RB.

expert reply by: Jameson C

0

Answer 1

The Fusion LED Trailer Tail Light #STL211XRFHB that you referenced is sold individually. If you needed a pair you'd need to order a quantity of two.

view full answer...

Answer 2

The torque requirements for leaf spring u-bolts depend on the diameter of the u-bolts that are being used. If the gross weight of your tandem axle trailer is 7,000 lbs, then you likely have two 3,500 lb axles. Typically 1/2 inch diameter u-bolts are…

view full answer...

Answer 3

If the U-bolts are 9/16 inch diameter, the torque specs should be between 65 to 95 foot lbs. If the U-bolts are 3/8 inch diameter, the torque should be between 30 and 50 foot lbs.

view full answer...

Answer 4

There is no specific torque rating for shackle bolts. Basically for the middle bolt there should be enough free play in the shackles to allow them to move. Tightening the shackle bolts too much will squeeze the shackle straps against the leaf springs…

view full answer...

Answer 5

I would be happy to help! For your 25' travel trailer weighing 7200lbs I recommend the Electric Jack w/ Footplate - A-Frame - 25-1/8" Lift - 3.5K - Black #EJ-3520-BBX you were looking at. This jack will have a fully retracted height of…

view full answer...

Answer 6

We have kits for that but you would need to know the diameter of your axles to determine which kit you would need. If the axle diameter is 2-3/8 inch which is common for 3,500 lb axles the kit you would need is the part #K71-384-00. If instead you…

view full answer...

Answer 7

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 8

You can use leaf springs that are rated higher than the axle without any issues as long as they measure the correct measurement for your trailer. For example the 6-leaf double eye spring for 7,000 lb axles part #e64SR measures 24-7/8" eye to…

view full answer...

Answer 9

Hey Ian, great to hear from you again! The differences between the MORryde CRE3000 #MR87ZR and AllTrek 4000 #MR89DR that fit a 33" wheelbase is the height between the hanger and equalizer bolts, and the amount of travel the suspension style will…

view full answer...

Answer 10

We have lift kits for trailer that easily add 2 inches to the height of the trailer. For that you'd want the part #RR23QX and you'd be set. I attached a picture that shows how it installs to give you an idea. This would be the easiest…

view full answer...

Submersible Trailer Taillight with Stop, Tail, Turn and Backup

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching