Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
When you’re parked and want your camper steady, these corner steadies hold everything in place. The locking swivel bracket and large grip handle make it easy to drop them down and lock at the right angle so the chassis stays secure. Once set, the 30" stabilizers keep movement to a minimum so you can walk around without the bounce or sway.
Nobody wants creaking metal or sinking jacks during a trip. These stabilizers use large, flat load-bearing feet that spread weight evenly on soft ground for a solid base. The foot locks away neatly when not in use, and silencer pads around it cut down noise caused by vibration for a quieter setup every time.
Daily weather exposure can wear down ordinary hardware fast, but these steel stabilizer jacks are made to handle it. The black powder coat finish resists corrosion and rust, proven through a 600-hour salt spray rating. That means they keep working smoothly even after long stretches outdoors.
You don’t need special tools to put these steadies to work. The included winding handle lets you extend or retract each jack smoothly by hand. The hex drive design gives you firm control, making setup and takedown quick and predictable without extra fuss.
Installation is straightforward with the weld-on mounts that hold tight once positioned. There’s no need to worry about left or right orientation—the universal design fits either side of your trailer frame. Each jack measures 30" long and can give you the sturdy support you need where it counts.
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
Ratings & Reviews
I really like the quality of the Ark products. These did not disappoint
plus great service from Etrailer.
Works as advertised… good quality, used as extra stability on 27 foot TT. Only takes a minute each, yes 2 in front of wheels and 2 in back of wheels at a 45 degree…would purchase again if needed.
The product quality is great, but I was very disappointed that immediately after my purchase, ARK released a new version that's capable of lifting the trailer which made this version obsolete.
I haven’t installed them yet, but the fit looks great. I assumed that weld in meant a permanent thing. I was pleasantly surprised to find that they have a weld in bracket that the stabilizer connects to with bolts. I will be ordering 2 more this week for the front.
exactly what I ordered.
Great Product. I was replacing a Ark Corner Steady on my Xventure trailer. I used it lift my trailer using a impact gun to extend it. I overtorwued it and broke it. Also it’s not rated to lift, only stabilize. I replaced both with black colored that match my trailer better.
Easy install, worked perfectly first time out, stout, great price for value
Easy to install and remove as needed. My stabilizers broke two days prior to a trip. I added these so I would not have to wait on parts. They worked amazingly.
Yes! They work well. I have used them extensively. I use my trailer a lot. I will be replacing 2 of the original supports for 2 more of these supports when I get around to it.
Satisfied with this product!!
Just look at the photo. This is Etrailers shipping quality. Repeatedly
These Ark jacks do exactly what I need them to. Their construction is very good and were simple to mount in my application. The reason they get 3 stars is because the finish may be a coating manufacturer-rated 600-HR powder coat, but Ark is not properly preparing the metal and applying this coating. Within a couple of months, my jacks were showing rust between the telescoping sections. This is not typical for quality powder coat! Now, I need to refinish them after just over a year since mounting them on my trailer. I paid more to get the black finish, but it's not holding up.
As usual E Trailer and specifically Virginia are on top of the processes. She is awesome! E Trailer gets 5 stars. The stabilizers got 4. One of mine failed after minimal use and I had to buy 2 to replace one
Does what I needed it to do. I noticed the release handle is a bit tight, hopefully it will loosen up with a little use.
These legs seure didn't skip leg day.
Stout af
I bolted them to the rear of my frame on a 2024 Jayco Eagle 355 MBQS. I’d say it made the camper stability about 70% better. For just over $200 bucks it was worth it to me.
These jacks are even better in person! Very heavy duty, great construction thus far. I opted on the top plate and used my existing holes on my rig to bolt on vice welding them. I used a step bit to drill the top portion of the stabilizer. I couldn’t be happier. I love the sleek look from the front and gives my rig a more customized look. I put these on my 2021 Rockwood MiniLite 2509s.
I have a 32' camper that only has stands in the very front and back of the trailer. When you walk around in the middle of the trailer it had a little bounce movement. I mounted the Ark stabilizer(one on each side) in front of the wheels on the frame to help take the bounce out. They helped a lot to improve the stabilization when moving around in the trailer.
Product seems to be well made and sturdy. Would have preferred another method of mounting besides welding. Will probably use in the straight drop down position. Has a better appearance that scissor jacks.
Works perfectly to level my off road trailer/camper. Gives my camper a solid footing on any terrain. Easy to mount and operate. They fold up tightly against the frame and don't affect ground clearance whatsoever. Would buy again.
David
1/25/2024
The jacks still work perfectly and have held up really well.
not as convenient as the electric scissor style stabilizer, but once installed, the are not difficult to operate and provide much more stabilization.
In use full time, these are simple to use and low profile (so they don't drag and get destroyed). Only negative is they are difficult to release. They've gotten easier (or I've been trained) over time.
Can’t believe these weren’t installed at the manufacturer. These are an absolute must for anyone owning an overland camper trailer!!!
These were a great addition to my custom army overland trailer, m1101 they are super easy to use and work perfect to level out when it's time to camp
Great product, they work very well on my overland trailer project
Heather A.
4/10/2026
That is an awesome build, that overland trailer looks incredible. You can tell a lot of thought went into that setup. What are you running up top on the rack, planning a full overland setup?
Heather A.
4/10/2026
Work great. I got 4 to stabilize our tent trailer. I added rubber mat pads under the bottom plate to increase the friction/grab on the ground.
Brooke M.
6/16/2025
Love the whole set up, Gary! Tell me this, how does the Cyber truck handle off roads? I've heard of some folks using them as work trucks on farms and whatnot. I wouldn't have guessed that just because they look so futuristic but it sounds like they "truck" just as well as the next! :)
Brooke M.
6/17/2025
Condition: Surface Scratches
Notes: Item has cosmetic scratches and is missing 1 bolt assembly. Otherwise unused.
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.
Richard W.
5/28/2025
These jacks worked out well for my application. They helped stabilize our 5th wheel. Would purchase again.