Conventional Ramp Door Spring for 5' Wide Enclosed Trailer - Single Spring - 85-lb Capacity

Item # 362SA5

(20 Reviews)

Retail:$152.72

Our Price: $141.56

You Save: $11.16

Add to cart

In Stock

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

single ramp spring 4-7/8 inch tall conventional door for 5' wide enclosed trailer - 85-lb capacity

conventional 4-7/8 inch tall spring 362sa5

single ramp spring conventional door for 5' wide enclosed trailer - 85-lb capacity

single ramp spring 56 inch wide conventional door for 5' enclosed trailer - 85-lb capacity

Show All (13) Product Images

Show Fewer Product Images

Videos

Review of TRC Enclosed Trailer Parts - Ramp Spring - 362SA5

Show All (1) Videos

Show Fewer Videos

Need help with installation?

Locate installers near me

Replace your old trailer door spring with this heavy-duty, conventional ramp door spring. This single-spring setup lets you easily open and close the ramp door on your enclosed trailer. Fits 32" to 56" wide trailer doors. Great Prices for the best trailer ramp springs from TRC. Conventional Ramp Door Spring for 5' Wide Enclosed Trailer - Single Spring - 85-lb Capacity part number 362SA5 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.

All Info
Reviews (20)
Q & A (0)
Related Parts
Photos

TRC Trailer Ramp Springs - 362SA5

Features:

Ramp door spring lets you easily lift and lower the door on your enclosed trailer without risk of injury
- Helps take on the weight of your trailer door so you don't have to
Spring reduces wear and helps prevent damage to door hinges
System can be modified to fit your specific application
- Slide the bracket and cable drum down and cut the shaft to a shorter length
Sturdy steel construction
Made in the USA

Specs:

Application: 32" to 56" wide trailer door
Dimensions: 56" wide x 4-7/8" tall x 7-1/2" deep
Spring capacity: 85 lbs
Cable length: 135"

Warning: It is recommended that only individuals who have experience winding torsion springs install this product. If you have not worked with a torsion spring system before, we recommend contacting a local garage door company to install this system.

TRCSA 5 TRC Enclosed Trailer Ramp Conventional Spring - Single 207 - 54" Wide - Qty 1

Customer Satisfaction Score:

89% were satisfied with this product

11% of customers were not satisfied

Wrong item was ordered
Arrived Damaged
Product did not meet expectations

11% of customers were not satisfied

Wrong item was ordered
Arrived Damaged
Product did not meet expectations

Customer Reviews

Conventional Ramp Door Spring for 5' Wide Enclosed Trailer - Single Spring - 85-lb Capacity - 362SA5

Average Customer Rating: 5.0 out of 5 stars (20 Customer Reviews)

Order: Replace your old trailer door spring with this heavy-duty, conventional ramp door spring. This single-spring setup lets you easily open and close the ramp door on your enclosed trailer. Fits 32" to 56" wide trailer doors.

by: Brent 06/16/2023

The outside of the box looks great I have not opened it yet but excited that I got in a timely manner.

by: Larry 02/20/2023

The spring assembly was a great fit and installation instructions included made the task go much easier than expected. Your package arrived earlier than expected. Great Job!

by: Robert 04/04/2023

Great product-Easy installation and works Great

by: Cheri09/19/2022 One Year Later

This made a HUGE difference! Now this single woman can handle this ramp door!

by: Roland 05/18/2023

Great looking product, excellent delive ry

by: Greg04/06/2022 One Year Later

The spring assembly fit perfect instructions spot on and what really matters to me I wasn't missing any hardware. I plan on buying another one, I couldn't find anything like it for price and availability.

by: John 05/02/2023

FAST>>>>SHIPPING>>>>NICE>>>>PRODUCT>>>> THANKS

by: Oscar 05/03/2023

Great
Thank you

by: Marlon 04/13/2023

it fit perfect.

by: Eddie 07/26/2021 One Year Later

This purchase was definitely worth the money. As a lawn care guy I raise and lower the ramp a lot. This will save ya back for your gf. lol The only reason I didn’t give it 5 stars, one of the cables keeps coming off.. it’s driving me insane! lol Still works with one though.

by: Luke 04/14/2021

Great Product! Just installed..works good on my 6x12 cargo trailer. Fast shipping too!

by: Gary 07/06/2022

Excellent quality well-built product

by: Dennis 12/05/2020

A package has arrived And it will be a while before I install it Thanks a lot

Dennis J. One Year Later

12/6/2021

Works great glad I bought them

by: Ward 04/16/2020

etrailer has great products and service is fast and packaged well. Highly recommend them.

by: Jaime 09/16/2021

Fast delivery and as described. Thx

by: Lucas 10/04/2023

by: Juan 03/24/2021

by: Mark R11/19/2022

by: Cheryl08/18/2021

by: Jerry 04/28/2021

See what our Experts say about this TRC Trailer Ramp Springs

Do you have a question about this Trailer Ramp Spring?

Can I Use the Conventional Ramp Door Spring on a Trailer that Doesn't Have a Spring?
Yes, it will. You can add the Conventional Ramp Door Spring for 5' Wide Enclosed Trailer item # 362SA5 to your enclosed trailer even though it didn't come with one. This fits a 32" to 56" wide trailer door. It measures 56" wide x 4-7/8" tall x 7-1/2" deep and has a 85 lbs capacity.
view full answer...
How Tall Can the Door be With the TRC 362SA5 Ramp Spring
With the cable of the TRC Ramp Spring # 362SA5 being 135 inches long, using the form to get the measurements of a right triangle, a^2+b^2=c^2, you will get 67 1/2 inches. This will therein allow for a door that is just over 5 1/2 feet.
view full answer...
How Long Are the Cables for the Conventional Ramp Door Spring for 5' Wide Enclosed Trailer
The Conventional Ramp Door Spring for 5' Wide Enclosed Trailer part # 362SA5 comes with cables that are 135" long.
view full answer...
Measuring Enclosed Trailer Ramp Door Weight For Torsion Spring Lift Assist
To determine the correct weight springs you will need a scale to determine how much weight is on the door when it lays out on the ground. You will place the scale on the ground in the center of the landing path of the door edge. This will tell you how much of the door weight is on the ground when fully open. Be sure not to go with a spring that is rated for more weight than your door or you might run into issues of the door trying to close after you lower it. You do not want to use the...
view full answer...
Pictures for Showing How Trailer Ramp Springs Attach to Enclosed Trailers
Normally the trailer ramp springs like the # 362SA5 attach to the inside of the top of a trailer door like the picture I attached shows. In the picture you can also see how it attaches to the ramp as well.
view full answer...
Length of Cables for Conventional Ramp Door Spring for 5 Foot Wide Enclosed Trailer
I reached out to the manufacturer, who told me the cable was 135 inches long for the Conventional Ramp Door Spring for 5' Wide Enclosed Trailer # 362SA5. What you will do is measure from the top of your door down to the bottom of the door and if it measures up you can use the spring. In regards to capacity, the 85 lbs is the max weight the door can be to safely use the ramp door spring. If you need more capacity or a longer spring, for a longer 150 inch cable and 120 lb door capacity,...
view full answer...
Trailer Ramp Spring Recommendation for Enclosed Trailer with 5 foot Wide Ramp
We have the enclosed trailer ramp spring part # 362SW61 that is 67 inches long which would work well for you and can be shortened to your desired length while retaining the 120 lb capacity. Your other option is to use # 362SA5 which has an 85 lb capacity and is 54 inches wide. This will install above the ramp door opening and the steel cable will help lift the door.
view full answer...
Can TRC Enclosed Trailer Ramp Spring Be Cut Down
An Enclosed Trailer Ramp Spring, like part # 362SA4, can be cut down to fit 23-3/4" to 43-3/8" doors. Ramp Spring # 362SA5 can fit 31-5/8" to 55-1/2" inch doors. They are customizable to fit the space available in your trailer as well as the door size so for your door I recommend # 362SA5. These springs are unique in that they are not the high torsion springs that require professional assistance for installation. They are self adjusting.
view full answer...
Would Replacing Ramp Spring of Horse Trailer Make Ramp Feel Lighter
If you replaced the springs on your ramp door with the # RS16933RH it would definitely make the door seem lighter. If the shaft diameter that you current spring is installed on is 1-1/2 inch in diameter this would fit and work well. The matching left hand side is # RS16933LH. We also have spring assemblies that mount up high and use a cable and torsion spring to make the lifting easier like with part # 362SA5 which is for 5 foot wide ramps.
view full answer...
Hitch and Ramp Door Spring for Look Element Cargo Trailer
To install a hitch, you'll want to go with an adjustable width RV hitch, the correct part will depend on how far apart your frame members are. • For an 18-51 inch frame spread, use # C13701 • For a 22-66 inch spread, use # C13704 From what I saw on the manufacturer's website, it looks like your trailer has a ramp door. We don't offer a shock absorber-type system for that, typically a garage door style torsion spring is used. The exact setup needed will depend on the inside width of the...
view full answer...

Do you have a question about this Trailer Ramp Spring?

Info for this part was:

Edited by:

Lindsey S

Expert Research:

Jameson C

Installed by:

Kathleen M

Updated by:

Wilson B

Updated by:

Carrie F

Written by:

Mike S

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.