Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Replacement washer is designed for use with 1" diameter spindles.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi everybody, Andy here with etrailer.com, and today we're gonna take a real quick look at this washer for your one-inch spindle. This replacement washer is designed for use with one inch in diameter spindles. And on your screen, I am putting up a diagram that I think will prove helpful for you, in case there we're some other minute measurements that you we're needing. You can also find this diagram on this product page if you need to refer back to it. But if you are in need of a washer for your one-inch spindle, this is going to be what you need if it meets those other specifications that you are looking for. Well, that's gonna conclude our brief look today.
I do hope that it was helpful for you. Again, my name is Andy. Thank you for joining me.
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
Ratings & Reviews
I shopped for days locally for an appropriate spindle washer for my 4x8 trailer. Found etrailer on line and there it was! I am pleased with the fast shipping. Now I know where to go for any future needs.
While rebuilding the axle I found I only had one washer/spacer. Went looking and found lots around but upwards of $8 each + shipping. By far etrailer.com was the cheapest, I will definitely order from them again !!
I bought these because on my original hubs, there was no washer behind the castle nut. But I didn't end up using them, because when I added them, there wasn't room to get the cotter pin through the hole. I read several comments saying you must have a washer under the castle nut, so I was worried about this. But then I read several other comments in which people said their 2000 lb. axle hubs came pre-assembled with no washers, it's just the way some of them are designed, and there isn't any room to add one.
Not much to say. It's a washer. It fits, it is really inexpensive, I received it very quickly. Couldn't find it in stock in any auto parts stores near me. Thanks!
I’m so happy I found etrailer.com! I’m rehabilitating an ole faithful trailer with new hubs and tires...
Their product descriptions are spot on. The video’s included in the photo gallery tells you everything you need to know as well. Very informative. Can’t go wrong.
I’m hearing disabled, so I like to shop without calling and struggling through a conversation, and their website is so informative you can find what you need!
Solid washer, 1/8" thickness. I used as roller washers. They are a little less outside diameter than designated "roller washers", but I needed the 1" inside diameter which ETrailer didn't have in a roller washer. These actually fit my roller BETTER because of the slightly smaller outside diameter and have more than enough coverage against the hog rings.
Thanks for a great site and the phone assistance.
Received the washers today. I now have the washers and dust caps and can refurbish the hubs and wheels on my 4 wheel car hauler. Turnaround time has been very good on the parts ordered and the quality is excellent !! I now have new backing plates, brake assemblies and wiring for this trailer. I appreciate the quality of your products and the promptness of your shipping.
Easy trailer repair with enclosed instructions for this non-mechanic. Quickly delivered and now I’m back on the water. Bought hub kit including hub, bearings, seal, and lug nuts. Also bought new washer and cotter pin.
Haven't installed the brake magnet yet but looks to be an exact match to the old one. As for the seals I ordered, I learned not to trust my owners manual. It listed a part number to get for seal replacement so I ordered them and etrailer delivered them very efficiently only to find out the i.d. was not a fit. I should have checked the dimensions before ordering. I have found other discrepancies in my Aliner manual so it's not to be relied on. Thanks for fast service, etrailer.
I ordered these washers from a Highly Trusted Company and from previous experience in ordering other items from them. Their communications during the Processing of this order was prompt, efficient, and consistent. I needed these washers for the axles on my yard cart (going from large wheels to smaller wheels) and because I could not find them at any Hardware/Home Stores in my area. I definitely recommend etrailer.com for solving all your parts problems.
Thank you for having such a wide variety of parts.
The original bearing savers, they are easy to install and paired with the Bearing Buddy bearing seals they are a reliable way to protect your boat trailer wheel bearings.
Install tomorrow. Should fit
just what i needed and FAST THANKS
Correct part for my application. Fit perfectly. Looks like good quality.
Just what I ordered and arrived in a short time. Thanks.
I ordered more than a spindle washer, and the shipping fees and quick service is much appreciated. when I replaced the bearings on my trailer wheels, I inadvertently put the spindles in the wheel backwards. (Dummy...LOL) Thus, I needed new grease seals and as long as I was doing it right decided to put new washers and cotter pins in as well.
Appreciate the prompt service but I guess I messed up on my order. I got two bearings that were the same size. My hub has a bigger inner bearing and seal.
Sierra K.
1/14/2022
You will need to know both the inner and outer bearing numbers. These numbers can be found stamped on the bearings themselves or you can use a digital caliper such as item # PTW80157 to measure your spindle to the thousandths of an inch at the seal, inner bearing and outer bearing.
Helpful Links
This washer fit exactly.
Worked out perfectly, this trailer didn't have these washers on the axle so castle nut was to low for the cotter pin to engage
Replaced the old electric brakes on my 1984 Gore Trailer and these fit perfect. The bearings and oil seal included in Part BK2-100 we’re also a perfect match!
Washer fit nicely for my application and works as it should
Great place, everyone there has been very helpful. I will be buying everything I need from a trailer from now on.
Excellently made and came with quick shipping. Better than expected!
Just what we needed!
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Robert
5/17/2019
No problems with the washer after one year. It is working fine.