Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Replaces the master cylinder assembly for your Dexter Model 10 or Model 20 brake actuator. Works for disc brake applications only. For drum brake applications use T2374600 instead.
Features:
Fits:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi everybody, Andy here with etrailer.com, and today we're gonna take a brief look at this replacement master cylinder assembly. This is going to replace the master cylinder assembly for your Dexter Model 10 or Model 20 brake actuators, and this is going to work with disc brake applications only. And for drum brake applications, I am including our item number for the master cylinder assembly that will work for drum brake applications. You can just take that item number and put it in a search field of our website, and it will take you to that master cylinder assembly. And this includes the master cylinder, obviously, and everything needed to install in your actuator. You have your brass connector, and then you have your right hand cylinder mounting brackets and left hand cylinder mounting brackets.
And then you're going to get two of the 3/8 of an inch hex bolts, and then two 3/8 of an inch hex nuts with two 3/8 of an inch lock washers. And then of course the filler cap here. And on our cap it says here use only DOT type 3 brake fluid, just so you're aware of that. And then the mounting holes, center to center, we are sitting right at 4 and 3/4 inches center to center. Let me line that up there for you a little bit better.
There you go. 4 and 3/4 inches on those mounting holes center to center. Well, that's gonna conclude our brief look today. I do hope that it was helpful for you. Again, my name is Andy.
Thank you for joining me.
Customer Satisfaction Score:
94% were satisfied with this product
6% of customers were not satisfied
Ratings & Reviews
Edward
2/14/2014
It was a replacement brake cylinder. Installed easily. Brakes now work as good as new. There have been no issues.
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Andras C.
6/18/2018
After a year gone by everything works fine as it supposed to.Iam very happy with my trailer.Thank you etrailer