Replaces the master cylinder and push rod assembly for your Dexter Model 10 or Model 20 surge brake actuator. Works with drum brakes.
Features:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Jeff: Hello everybody. This is Jeff at etrailer.com. Today, we're going to take a look at this replacement master cylinder and push rod assembly for drum brakes. This fits the model 10 and 20 actuators. Now this will replace the master cylinder and push rod assembly on your Titan model 10 or model 20 surge brake actuator. Basically, this master cylinder holds the brake fluid in the actuator and it connects to the inner slide of the surge brake actuator.
When that surge brake actuator is activated, the inner slide will move towards the master cylinder. The push rod will cause it to apply the hydraulic pressure to your trailer brakes. Now this one here is designed to work with drum brakes. The cylinder bore on this master cylinder is one and one quarter inches and it is made in the USA. But that should do it for the review on the replacement master cylinder and push rod assembly for drum brakes for the model 10 and model 20 actuators..
Average Customer Rating: 4.6 out of 5 stars (26 Customer Reviews)
Replaces the master cylinder and push rod assembly for your Dexter Model 10 or Model 20 surge brake actuator. Works with drum brakes.I have not installed the master cylinder but packing was not what I would expect. The taping only caught a thin edge of the flap. There was no packing to keep it from banging around during delivery. The inside of the box shows that it took some good hits. Not your responsibility during delivery but, it is your responsibility for the packing.
Replacement part easy to install, works as expected. Master cylinder continues to work as expected months after installation. No problems noted with operation or product construction.
Replaces my old master cylinder just fi ne.
Was the exact part that was advertised and came 4 days early in shipping thank you etrailer.com
Correct part, quick ship, good price. We use these on grain wagons.
Excellent product, great price and good service.
Fit correctly, bled well and works as it should
Fit exactly like origina, no issues, works as it should.
Great service
Great service
Every thing was perfect except for the fitting wasn't an inverted flair fitting nor were there any info to give you a clue. It is 3/8" npt so I had to find an adapter.Wish I had that info up front I would have had it inn the first place. But other than that it was an exact fit.
better late then never
Very happy with all the items. Quick shipping and all appears to be of decent quality.
The order was filled promptly with the correct parts. Would recommend using etrailer.com.
Perfect replacement for my 1989 Ezload trailer
too long delivery but I understand
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.