In-stock alternatives that can ship today
Replaces master cylinder for Titan and Dico Model 10 and Model 20 brake actuators for drum brakes.
Features:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we'll be having a look at the Titan master cylinder for Titan model 10 and 20 actuators with drum brakes, part number T2374400. Here's what your master cylinder looks like. As you can see, we have a new push rod assembly for it too, and a new cap for our fluid reservoir. Now, the reason you want a new master cylinder is it saves you the hassle and expense of replacing your entire coupler assembly with your actuator. This will allow you to just unbolt a few items, undo one break line, and you'll be able to get your trailer on the road again with working brakes. All right, we have a coupler here sitting on our work bench for demonstration purposes to show you how this would go on. We'll start by prying off this cover with a flathead screwdriver, just go up underneath it and work it out.
Now you can see where your cap is for your master cylinder. We'll unscrew that, get it out of the way. Then we have four bolts to hold our master cylinder assembly in place, two on each side, going to remove all four of those. We'll slide it out with the bracket it's mounted on. We'll undo the four bolts that hold the master cylinder to the bracket.
Now, our master cylinder's held to our bracket with two bolts, and two nuts with star washers. We'll unbolt these real quick. The master cylinder removed from the bracket to place the new one on. We'll tighten down our bolts that hold it to the bracket. Now if you didn't purchase a new fitting that your brake line screws into in the back of your master cylinder, you'll need to swap that, so we'll just loosen that up.
Pop off the plug, and we'll screw that in. We do have these fittings available separately on our website if you'd like to purchase a new one. I'll just snug that back down, we'll remove our cap from the new master cylinder and we'll slide it into our actuator. We'll just push our master cylinder in so our holes line up again. Once you have one started it's a lot easier for the rest because the bolts holding the pressure off of the plunger. Okay, with all our bolts started we'll snug them down again.
Okay, with it bolted down we install our reservoir cap, pop back on our cover here. Once it snaps back in place, your install's complete. Okay, so that shows you how to replace the actual master cylinder itself inside the coupler. If you we're doing this on your trailer, you would have to make sure you replace your brake line here, screw it back in there, refill your reservoir brake fluid and then bleed the brakes on your trailer. It's a real simple process to do, just bleed it like you would any other hydraulic actuator for a master cylinder. There you have it. That completes our look at the Titan master cylinder for Titan model 10 and 20 actuators for drum brakes, part number T2374400.
Average Customer Rating: 4.8 out of 5 stars (71 Customer Reviews)
Replaces master cylinder for Titan and Dico Model 10 and Model 20 brake actuators for drum brakes.Ordered a replacement master cylinder for my trailer, the part was the same as OEM bolted up fine. Exactly what I needed. 607094
Alex - 02/22/2020fast shipping. Great price. Bought for Ag use on Brent trailers . Worked great. Should promote ag use. Thanks 718116
etrailer is great! They had exactly what I needed, great customer service and fast and free shipping on my order, they also sent emails to keep me updated on the one item they didn't have stocked. Thank you 690629
Master cylinder arrived in a timely way and is as ordered. 692063
Received as advertised and as ordered 768367
I haven't installed this item yet but will do as soon as my boat is out of the shop plan too. I was going to replace the whole actuator unit until I saw a [online] video. these guys had the exact part for my trailer and purchased the electronic brake backup unit. shipping was fast and excellent prices as matter better than [online retailer]. I have some more parts to purchase to complete my trailer brake overhaul.. highly recommend these guys. 766457
The ordering was easy, the online tutorials were very helpful, and the parts arrived a few days after being ordered. I would definitely go back to each trailer for all future needs. 763022
great product and at a great price. 745312
Master cylinder is a direct replacement for a 26 year old trailer 736698
I looked everywhere and could not find the parts i needed, I came across etrailer.com and found every part i needed with a very good price. The site is very helpful with information and video's. Now I can get my trailer finest with the right parts and not jerryrig it. 690561
A very good part at a reasonable price. Great customer service and super prompt delivery. Thanks a bunch 682339
Exactly what I needed and as advertised 636921
Excellent service! I tried looking for a master cylinder for my boat trailer here in town and wasn’t able to find anything. Then I googled the part number and found these guys! Great fast shipping! Great quality parts! Definitely recommend them anytime! 629619
as depicted shipping was fast but slower than normal due to holiday season but arrived on projected schedule and price was the cheapest I could find 588238
Excellent product 565261
These guys are the best! Blake was very helpful with all of my questions. My order arrived before it was promised. The parts are perfect. I will definitely continue doing business with etrailer! A very happy customer 552199
You should include the hose coupling fitting. Over time the manufacturer has changed the fitting size. The old one won't fit! I had to order a new fitting and now I have to wait another 6-8 days to complete this repair. The actuator looks good I have assembled it in place. 543136
Received product quickly and accurately. One important thing I didn’t realize was the back port size for the old Titan model 10 for drums is different this new model so you MUST buy the reccomemded fitting or you’ll very disappointed. You must have the correct size fitting otherwise your system will have to much pressure and cause your brakes to “shutter” or grip to hard when braking. 519996
Everything is working good. I'm going to take the boat out of storage and put it back in the water soon! 497567
quick 495224
The product worked great the time i had the surge brakes installed. I later changed them to electric and that works way better. 476690
Product was exactly what i expected and at a great price. Shipping was fast. My only regret was not ordering the special brass adapter sold along with this new brake cylinder. The tread size on the new master cylinder is 1/8 in and my original one was 1/4 in. Oops. 463450
When speaking with the sales representative, utilizing the number on the old material the new product was ordered and exactly the right fit. 451570
Quick shipping, great prices, quality p arts. 446710
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.