We'll connect you with nearby partnered installers who know this exact setup.

Yakima

Yakima BaseLine Roof Rack for Naked Roofs - JetStream Crossbars - Aluminum - Black - Qty 2

Part Number: Y39AB

85928 Reviews | 1 Questions

In Stock

$694.80

Not Confirmed to Fit

2011 Subaru Forester

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

Add to cart

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

yakima roof rack crossbar aero bars baseline for naked roofs - jetstream crossbars aluminum black qty 2

yakima roof rack crossbar baseline for naked roofs - jetstream crossbars aluminum black qty 2

Show All (16) Product Images

Show Fewer Product Images

Customer Photos

Yakima BaseLine Roof Rack for Naked Roofs - JetStream Crossbars - Aluminum - Black - Qty 2 customer photo

Show All (15) Customer Images

Show Fewer Customer Images

We'll connect you with nearby partnered installers who know this exact setup.

SCHEDULE AN INSTALLATION

This stylish, aerodynamic Yakima roof rack gives you the space to carry gear on your vehicle. Rubber strips in the top channels push down to load carriers or accessories - no need to trim. Installs on your vehicle's naked roof. Great Prices for the best roof rack from Yakima. Yakima BaseLine Roof Rack for Naked Roofs - JetStream Crossbars - Aluminum - Black - Qty 2 part number Y39AB can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.

All Info
Reviews (85928)
Q & A (0)
Related Parts
Photos

Yakima Roof Rack - Y39AB

Highlights

Custom Fit for Your Vehicle: Installs on your roof with a kit designed for your vehicle.
Complete Roof Rack System: Includes 2 JetStream crossbars, 4 BaseLine towers, and a custom fit kit for your vehicle.
Room for More Gear: 60" long crossbars provide wide carrying space for cargo, water, snow, or bike carriers.
Quiet, Aerodynamic Design: Rubber strips in the top channels help reduce wind noise and vibration while you drive.
Simple Accessory Mounting: Push-down rubber strips let you press hardware into the tracks—no trimming needed.
Durable and Secure Build: Aluminum construction supports up to 165 lbs and works with Yakima SKS lock cores (sold separately).

Features to know about

Stay Steady on Every Adventure: Complete Roof Rack System

This Yakima BaseLine roof rack gives you a solid, dependable setup for carrying gear when your roof doesn’t have rails. It comes as a complete system with 2 JetStream crossbars, 4 BaseLine towers, and a custom fit kit designed for a secure installation on a naked roof. The aluminum construction provides strength while keeping weight down, supporting up to 165 lbs so you can confidently load kayaks, cargo boxes, or camping gear.

Cut Down on Wind Noise: Aerodynamic JetStream Crossbars

Driving with gear up top can bring a lot of noise, but the JetStream bars are built to keep things quiet. Their aerodynamic shape helps reduce drag and wind sound, while the push-down rubber strips in the top channels press around your mounted hardware to seal gaps and cut vibration. The result is a smoother, quieter trip whether you’re commuting or cruising down the highway for a weekend away.

Load Gear Fast Without the Hassle: Push-Down Rubber Strips

Mounting accessories is simple with this rack’s push-down rubber strip design. Instead of trimming strips to fit each accessory, you just press the hardware into the track and the strip closes up around it. It keeps setup easy and clean while still protecting against noise and weather. This makes switching between kayak cradles, cargo baskets, or bike mounts quick and frustration-free.

Bring Every Type of Gear: Works with Top Channel and Clamp-On Accessories

The Yakima BaseLine rack is ready for all kinds of adventures. The aero-style crossbars work with most universal cargo, water, snow, and bike carriers—whether they mount into the top channels or clamp around the bars. This flexibility means you can use the same base setup for paddling trips, ski weekends, or long road travel without changing racks.

Add Peace of Mind: Lock Core Compatibility

You can upgrade security with Yakima Same Key System (SKS) lock cores, sold separately. They help deter theft by locking the rack to your vehicle so you can leave it installed between trips knowing your setup stays put.

Specs

Dimensions

Crossbar dimensions: 60" long x 2-3/4" wide x 1-1/8" tall
Top channel dimensions: 7/8" wide x 7/16" tall x 7/16" opening

Weight and Capacity

Weight capacity: 165 lbs

Color

Color: black

Construction

Construction: aluminum

Warranty

Limited lifetime warranty

8000426 Yakima JetStream Crossbars - Aluminum - 60" Long - Black - Qty 2

8000162 Yakima BaseLine Towers for CoreBar, JetStream, and RoundBar Crossbars - Bare Roofs - Qty 4

8006130 Custom BaseClips and Pads for Yakima BaseLine Towers

Installation Details Y39AB Installation instructions

Alternate Instructions Y39AB Installation instructions

4.8

87549 reviews

5 Stars		(77206)
4 Stars		(7087)
3 Stars		(717)
2 Stars		(104)
1 Star		(2435)

by: Linda 02/28/2025 One Year Later

Perfect fit! Who’s recommend and repurchase if I need for another vehicle

Linda One Year Later

3/1/2026

Still amazing, easy to clip on and off between road trips. Sturdy an well made.

by: Chris 10/24/2024 One Year Later

Yakima racks are outstanding!

Click to Enlarge

by: Frank 02/10/2023

Ford Edge

Not a bad setup. I dont believe you need the 60" bars i received as they hang over the edge of your Hyundai. You need to watch your head getting in and out of your vehicle. The Jetstream crossbars are very loud at speeds over 65 mph. Im probably used to it by now, but it is definitely noticeable. Much louder than an older Rhino Rack of similar dimensions i had. Install was simple and took about 30 minutes, just take your time and measure correctly like all roof racks.

Click to Enlarge

by: John 08/31/2017

2015 Ford Fusion

The Yakima rack system for my 2015 Ford Fusion is an awesome product! I hadn't needed to buy aftermarket racks in many years. These are a super solid, beefy, and very well made product. I am very impressed with the quality and fit. Yakima has obviously put lots of design time into them. And etrailer does an outstanding job of making sure you get the right product for your specific need.
I chose this rack specifically because of the spread between the bars - 32" - and for the higher weight limit, as I'm carrying a fishing kayak.

Click to Enlarge

by: Rod 12/05/2021

2010 Jeep Grand Cherokee

Product exactly as expected. Quality bars. Using on a 2021 Jeep Grand Cherokee L. Looks great installed. Little to no wind noise. And, as usual, top notch service by the etrailer crew! Have purchased several items from etrailer over the past 10 years and have always been impressed by how timely they are and how responsive and helpful they have been regarding product questions. They are absolutely the first merchant I go to when shopping on line!

Click to Enlarge

by: Eric 02/26/2025 One Year Later

Great product haven’t had any issues with it. Would highly recommend that anyone that’s looking for a roof rack system and a great seller at etrailer

Brooke M.

2/26/2025

Thanks, Eric! Glad the crossbars have been working well for you :)

by: Todd 06/24/2023

Really easy to install & work as specified. So happy with the customer support/service at etrailer.

Click to Enlarge

by: John 02/27/2025

The product itself was excellent. However, it came with no installation instructions showing how to remove and replace the shorter cross-bars. Fortunately, my son-in-law who is an engineer and very knowledgeable figured it out and did the installation.

by: Joseph 08/23/2021 One Year Later

Pontiac Trans Sport Van

1 year later and still love my Yakima JetStream system. I've mostly used them to transport my kayak however I've also been able to transport some big box store items as well. They are very versatile. There is a t-track option as well as wrap around attachments. I've use ladder attachments, eyebolts, and Thule Hullavator in t-track. I've used Malone MegaWing and Yakima Skybox as wrap around attachment. What I really like about the t-track system is that you do not need to cut out the rubber track insert. You simply slide over the rubber, which allows you to adjust your system, on the fly, to load what you need to carry.

by: David 08/28/2020

2019 Toyota Highlander

I have not bought car roof racks for decades--back when there were those very useful rain gutters. So I was shocked with the high prices. But what you get today is much more carefully engineered with a complicated construction. This Yakima version even comes with a manual 3.5 mm hex driver which turns out to be a torque wrench too. You use it 16 times, torquing to its limit, in installing the two cross rails on the four towers. Years ago you installed the towers where you wanted them on the rain gutters and adjusted the cross rails by sight. No more. You must go on line to Yakima. You must get the precisely engineered dimensions for your exact vehicle. You even adjust the towers for the roof slope and any toe-in of the roof line. Pay attention to the precise instructions. The result is very solid. I wish that I had more space between the cross rails. There is room for another 6 or 8 inches given where the door openings on my 2019 Toyota Highlander are spaced. But then the rear base clips would be different and that logistics would add yet more to the price. I am confident that I can secure a 4 X 8 sheet of plywood on the cross rails. And I will find my vehicle in the mall parking lot easier with those good looking rails. While I am happy with the end product, I wish the vendors had given more explanation of the fixed dimensions of today's installations. That would have helped make my on-line shopping less frustrating. Part of the problem is that Yakima and Thule do not provide cross rails for my LE Highlander's existing tower bases. And I could not get 60 inch cross rails on any of the versions that fit my LE's bases.

by: Cami 03/10/2018 One Year Later

The roof rack has been awesome! It has been really handy to be able to attach our bike rack attachment, kayak bars or traveling cargo carrier. My only complaint is that the end caps fell off somewhere along one of our many adventures and looks a bit disheveled. Other than the appearance it has been very versatile and we love it!

by: Bill 12/13/2016

I want to thank the staff at eTrailer for their outstanding support. After my roof rack order got off to a shaky start the customer service staff stepped in and made it right; 100% RIGHT. I cannot thank them, and eTrailer, enough. Regarding the roof rack itself, I have now installed it and can vouch that the installation was a breeze. All parts fit and the instructions were correct. For the record, this is not my first purchase from eTrailer (I've bought hitch items from them before) and it won't be my last. They have ALWAYS given great service, their web site works, their products and descriptions are good, etc., etc. Thank you!

by: Kyle 10/23/2024 One Year Later

Great UX for finding the options matching my car, and the baseline towers work great. Simple straightforward site, will plan to use them again when needed.

For those also buying crossbars for cars without roof rails, recommend taking a silver sharpie and marking the placement of the crossbars on the weather seal at the top of the door openings. Makes putting them back on way less of a hassle if you don’t want them on 24/7.

by: Chad 12/07/2018 One Year Later

Excellent product. These bars are very quiet and look great on our truck. Assembly and installation was straightforward. We've used these bars to secure our large Yakima car top carrier and have traveled on several trips to the mountains and cabin with no issues. I suggest ordering an extra set of end caps as we've lost one in the car wash. However, have had no problems with the bars when going through the car wash.

As always, I GREATLY appreciate the superior product support that etrailer.com provides. They have the best product content on the web, hands down.

by: Richard 04/06/2023

Arrived as part of a set of components for a roof rack and kayak carrier. I liked that etrailer had a guide to get the right components to fit my car's make and model year. This baseclip set arrived quickly, but the set for the rear of the car that arrived with them were obviously returns that had not been inspected. That set was missing parts, requiring follow-up calls to arrange for a new replacement for the incomplete set, and about a week's delay in getting the rack up on the car.

by: Daryl 04/29/2020

Jeep Cherokee

These Yakima crossbars are a part of the Yakima towers I bought to install on my Jeep Cherokee to hold a pair of Kayaks. They fit great as advertised. In fact I got these discounted as an open box. I would have never known, they look brand new. Thank you etrailer for your great advice, customer service and quick shipping process.

by: Robert 01/06/2022

The bars are sturdy, aerodynamic and super strong. I bought this to fit a Yakima Skybox 16 and these worked great. The measurement ticks on the bottom assist with getting the box centered and have a great gasket system that you fit yourself. These mounted pretty quick even in 20 degree weather.

etrailer sold this as a set based on my car and every piece was great and a perfect fit. Communication and tracking info was great and they delivered it a day before promised.

by: SJHughes 12/23/2017

High quality bars that were easy to install to the Skyline towers and work great with our Yakima JayLow kayak carriers.

by: Ed 06/24/2020

All aspects of the purchase and installation were great. Based on the information provided on the etrailer.com website, I had a high level of confidence that I was purchasing the correct product(s) for my vehicle. The installation was relatively simple and straightforward and the rack is rock solid on my roof. It appears that I did a great job of following the directions :)

by: Dave 02/11/2024 One Year Later

Love my Yakima roof rack!! It exceeds my expectations.great product. Also thank etrailer for the tec support! great staff always there to help thanks again!!

by: Henry 05/29/2022

Yakima clips provided a perfect fit for my
car. The roof rack is now solidly attached.
Also impressive was etrailer great
customer service

by: Richard 06/10/2020

Ordering was a breeze. Fast shipping. Excellent communication. Product arrived well-packaged. Product easy to install; completely as described. Yakima products are superior-performers. etrailer is an excellent source for truck & trailer products.

by: Greg N. 11/18/2021

Ford Expedition

I had a need for the Yakima Crossbars and Towers for my Expedition. With a short delivery time frame, I contacted etrailer knowing they are the best. Justin B. worked with me to get the correct parts then made sure that the products arrived in time, it did. The Towers, Bars and overall excellent customer service from etrailer made for a great experience. Thanks again for exceeding expectations etrailer!

by: TimN 03/19/2024

Chevrolet Silverado

Excellent solution for my 2023 Chevy Silverado. In the past, I have had rails installed on the roof of my pickup trucks, but I find the BaseLine towers to be a better solution, since they don't permanently change the truck. Plus, they are much more solid than SkyLine system on the rails.

by: Jonathan 04/25/2021

Nice solid crossbars and perfect fit for a Thule Hullivator kayak rack.

87549

true

Show More Reviews

See what our Experts say about this Yakima Roof Rack

Do you have a question about this Roof Rack?

Can I Use the Thule Hullavator # TH898 with the Yakima JetStream Crossbars and Lock Cores?
I just went ahead and looked up your orders and confirmed that you recently ordered the Yakima Same Key System (SKS) Lock Cores (QTY 4) # Y07204, the Yakima TimberLine Towers # Y33TR, and the 50" JetStream Crossbars # Y00425. The lock cores that you purchased install into the TimberLine towers and not into the end caps of the JetStream crossbars themselves. With that being said, the Thule Hullavator # Y00425 is compatible with the JetStream crossbars. It is important to note, though,...
view full answer...
Recommended Fairing for Rola Roof rack on a 2009 Honda Accord Sedan
Yes! Out of the variety of fairings that we have to offer I recommend the 40" long Inno Fairing # INA261 because it will fit perfectly with the 38" long Rola Sport Series Roof Rack # 59757 for your 2009 Honda Accord. If you let me know what you are wanting to use the roof rack for I can make additional recommendations for you. I have also attached an installation video and a picture of this roof rack on a 2009 Accord Sedan that you can reference.
view full answer...
Can 60 Thule AeroBlade Bars be Used on a 2015 Jeep Grand Cherokee with the E Group Package
To determine if you can use the 60" WingBar Evo Crossbars, part # TH711500 or part # TH711520, will fit on your 2015 Jeep Grand Cherokee you first need to measure the center to center distance between the mounting holes where the Podium feet will sit. I have attached a picture showing where you want to measure. If this measurement falls between 46-1/2" - 59-3/4" then the 60" bars will fit. For your E Group package you also need the Podium Foot Pack # TH460R and the Fit Kit # THKIT3142 to...
view full answer...
Kayak Rack and Load Assist for a 2018 Toyota Prius Prime Without Glass Roof
Hey, Nick! Happy to help out. The best and easiest kayak rack to use with a load assist is the Thule Hullavator Pro # TH898. One big advantage is that everything is built into the carrier itself, here are no extra parts to remove or store. Personally, I’m not a fan of other load-assist options like the Malone DownLoader # MPG114MD-351XL, since you have to store the Telos legs inside your vehicle while traveling. That’s especially inconvenient if you’re working with a smaller vehicle. I...
view full answer...
Roof Rack for 2018 Tacoma With Leer XR100 Cap And Thule Rails
Hey Bill! You aren't finding the fit kit because Thule discontinued the one for rails and doesn't have a replacement right now. My recommendation is to install a Yakima roof rack instead. This will still fit the Thule tracks, and their JetStream bars are comparable to the WingBar. You will need the following: -SkyLine Towers for Yakima Crossbars # Y53TR -Landing Pad 1 for Yakima SkyLine and Control Towers # Y00221 -Yakima JetStream Crossbars - Aluminum - Black - 50" Long # Y00425 OR -Yakima...
view full answer...
How Can I Tell if I have Fixed Mounting Points on My 2015 Mazda CX-5 for a Crossbar System?
According to the specs I have, you may have fixed mounting points on those rubber strips on your 2015 Mazda CX-5. The way you can tell is if there is a small removable tab on those rails that cover the holes. I went ahead and attached a video of a 2015 Mazda CX-5 with fixed mounting points to give you perspective about what to look for. If you determine that you have fixed mounting points, I recommend the following setup: - Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 46" #...
view full answer...
Recommended Roof Rack for Using Two Hullavators on a 2024 Ford Bronco Hard Top
Hey Tina! Not sure what roof rack setup you were using on your Jeep but I checked with Thule and they do not have one that will work with a Hullavator item # TH898 on a 2024 Bronco. To mount and use two Hullavator item # TH898 on a 2024 Ford Bronco 4 door hard top with factory raised roof rails you will need the following parts: TimberLine Towers for Yakima Crossbars item # Y33TR 70" Long - Yakima JetStream Crossbars - Aluminum - Black item # Y00427 The 70" bars are the next size up...
view full answer...
Recommended Roof Rack for Hullavator and Kayak Carrier on 2019 Honda Pilot
Thank you for all of the information! While you are able to use the Hullavator # TH898 with your setup as far as weight goes, this kayak carrier does require the crossbars to stick out 4" - 8" out past the roof rack feet. Since the Thule SquareBars have a limited amount of space under them for the feet you can only use the 53" Bars # TH712400 but this wouldn't give you the required spacing for the Hullavator. I recommend using the Yakima 60" JetStream Crossbar # Y00426 instead with the...
view full answer...
Yakima Roof Rack for 2023 Subaru Outback With Thule Hullavators
Hi Tina; I also prefer Yakima so I'm glad we're on the same page. For your 2023 Outback and Hullavators I recommend the JetStream roof rack. You will need the following: -Yakima JetStream Crossbars # Y00426 -SkyLine Towers for Yakima Crossbars # Y53TR -Landing Pad 27 for Yakima SkyLine And Control Towers # Y46VR The JetStream crossbars are extremely quiet so you won't have a bunch of road noise added to your day to day driving. If you want to keep your rack secure you can also add the...
view full answer...
Parts Needed For A Yakima Roof Rack On A 2021 Ram ProMaster City With Factory Mounting Points
Hi Phillip, To connect to the factory mounting points on the roof of your 2021 Ram ProMaster City you'll need Landing Pad 22 # Y00248 along with SkyLine Towers for Yakima Crossbars # Y53TR. From there you can go with crossbars like the Jetstream # Y00425 (50") or # Y00426 (60"). I've attached a picture below from Yakima's website showing this fit.
view full answer...
Best Roof Rack for 2020 Kia Telluride With Naked Roof and How Does It Attach
There are two roof configurations for a 2020 Kia Telluride, bare roof and flush side rails. The roof rack system for a bare roof attaches to the door jambs via car clips whereas the system for flush side rails attaches to the flush side rails. I recommend the Yakima JetStream Crossbar System part # Y00426, part # Y28TR, part # Y06125, and part # Y06165 if you have a bare roof. The Yakima Crossbar system is best because it has a custom fit for the best overall look, aero crossbars for...
view full answer...
Roof Rack Fit on 2012 Toyota Venza With Panoramic Sunroof
There is one roof rack that is a confirmed fit for your 2012 Toyota Venza with a panoramic sunroof, though the sunroof should not be opened with the rack on. There isn't a roof rack available for your Venza that is going to allow normal use of the sunroof when the rack is on, but you can remove the rack if you like when you aren't using it in order to utilize the sunroof. The roof rack that fits your '12 Venza with a panoramic roof is an exceptionally nice one from Yakima, and consists...
view full answer...
What Does The Yakima TimberLine Roof Rack for Raised Rails Y39YD Come With?
Hello Alexander, thanks for reaching out. The Yakima TimberLine Roof Rack for Raised Rails part # Y39YD is a full roof rack system, and this is the correct fit for the 2025 Kia Sorento. It comes with four TimberLine Towers and two 50" JetStream crossbars. If you want to do a larger crossbar, it is possible, we just wouldn't offer it as a kit. The next size up for the Yakima Aero bars is a 60". So all you would need is the four pack of TimberLine Towers part # Y33TR, and a set of 60" crossbars...
view full answer...
Recommended Roof Rack For A 2023 Toyota RAV4 With A Thule Hullavator
Hi Cathy, To ensure that you can get the extra extension to mount the Thule Hullavator # TH898 you'll want to go with a Yakima roof rack system. Yakima crossbars run their mounting track the entire length of the crossbar so you can go with ones that are longer than your typical length without worrying if the mounting feet will be able to connect. You'll want the following components: Yakima JetStream Crossbars - Black - 60" Long # Y00426 or silver # Y00429 SkyLine Towers for Yakima Crossbars...
view full answer...
Will a Yakima Roof Rack System Fit My 2020 Toyota Highlander LE?
I confirmed with Yakima that mounting points that are on your bare roof of your 2020 Toyota Highlander will fit a roof rack system. After you pop off the tab that covers the mounting points, there is a screw that you will use to attach a roof rack system. I went ahead and attached a video that shows how you would attach a Yakima roof rack system on the 2020 Toyota Highlander. For the parts you need for that setup, you will need the following parts: - Yakima JetStream Crossbars - Aluminum...
view full answer...
How To Carry Skis and Snowboards on a 2017 Lexus NX 200t With Flush Side Rails
So long as you have flush side rails on your 2017 Lexus NX 200t then I do have options for you to carry both your three snowboards and a pair of skis. For the roof rack, I recommend using the Yakima JetStream Crossbar System which is composed of part # Y00426, part # Y64AR, and part # Y59AR. The JetStream system has aero crossbars for reduced wind noise and integrated channels for use with channel mounted accessories. For a roof rack mounted ski carrier, I recommend the Yakima FatCat...
view full answer...
Recommended Rhino Rack Roof Rack With Bike Rack And Surfboard Carrier For 2015 Ford F-150
For your 2015 Ford F-150 SuperCrew Cab, I recommend the Rhino Rack Roof Rack consisting of: Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 59" Long - Qty 2, # RRVA150B-2 Rhino-Rack 2500 Series Legs for Vortex Aero Crossbars - Qty 4 # RRRLKVA Custom DK Fit Kit for Rhino-Rack 2500 Series Roof Rack Legs - Naked Roof # DK427 The custom fit kit is designed to specifically fit your vehicle curves and prevent marring and scratches as you mentioned. This kit is rated to carry 165 lbs....
view full answer...
Will Thule Hullavator Fit a Yakima Roof Rack on a 2018 Subaru Outback
The Thule Hullavator, # TH898, will fit on a Yakima roof rack so if you like the spacing and looks of the Yakima racks you can certainly go that route for your 2018 Subaru Outback. With the Hullavator the roof rack crossbars need to stick out past the mounting feet by at least 4 inches. What this means you will need to use longer bars than what would normally be recommended for the vehicle. If you go with a round bar system then you will need the following parts: Crossbars # Y00409 SkyLine...
view full answer...
Roof Rack for Carrying a Canoe/Kayak on a 2014 Subaru Impreza with a Naked Roof
While we do have roof racks for your 2014 Subaru Impreza, the (discontinued) Custom Fit Kit WB-K473 you referenced is for various years and models of GM pickups and there isn't a Whispbar roof rack currently in production that fits your vehicle. If you like the higher quality of a Whispbar product then you'll want to go with a Yakima roof rack as they actually manufacture the Whispbar brand. From what you were looking at I'm guessing you have a Sedan that isn't the WRX. For this you'll...
view full answer...
What Parts Do I Need to Add a Set of Crossbars to the Yakima 60" HD Tracks for Roof Racks?
Hey Troy. The Yakima 60" HD Tracks for Roof Racks item # Y74MR require the following parts to add a crossbar setup: SkyLine Towers for Yakima Crossbars item # Y53TR Landing Pad 26 for Yakima SkyLine Towers item # Y75ZR. You'll need two sets. One for each crossbar. 60" Long Yakima JetStream Crossbars item # Y00426 What do you plan on using your new roof rack for?
view full answer...
Roof Rack for 2018 Jeep Wrangler JL Unlimited Hard Top to Carry Thule Hullavator Pro Kayak Carrier
There are a couple options for a roof rack on your 2018 Jeep Wrangler JL Unlimited with a hard top, from Yakima and Thule, with both allowing you to use the Thule Hullavator Pro Kayak Carrier and Lift Assist with Tie-Downs # TH898. The parts you need for the Yakima roof rack consist of: - Yakima JetStream Crossbars # Y00426 (Black) - SkyLine Towers for Yakima Crossbars # Y53TR - Landing Pad 6 # Y00226 The parts you need for the Thule roof rack consist of: - Thule WingBar Evo Crossbars...
view full answer...
Will Malone SteelTop Roof Rack Fit 2025 Subaru Outback
Hi John; is your 2025 Outback the Wilderness model? The Malone SteelTop Roof Rack # MPG203 only fits the rails on the Wilderness. This will not fit the factory rails on the regular Outback models. If that is what you have, let me know in the comments below and I can see what else is available. Are you looking for a specific crossbar length?
view full answer...
Roof Rack for 2024 Toyota Sienna
Thanks for letting us help Marc. The ideal crossbar length really depends on what you're planning to carry and how much bar overhang you're comfortable with. From what I was able to find, the distance between the factory raised side rails on your 2024 Toyota Sienna is approximately 40 inches. If you go with a system that uses 50-inch crossbars, such as the # Y72GD you were looking at, you'd have roughly 5 inches of overhang on each side. There's also no issue with using a longer 60-inch...
view full answer...
Recommended Yakima Roof Rack for My 2010 Hyundai Genesis Coupe
While we do have a great Yakima crossbar system that is confirmed to fit your 2010 Hyundai Genesis Coupe, Rhino-Rack does not have a roof rack option that fits your vehicle. With that being said, I saw that you were looking at the Yakima round crossbar system that includes the 58" Crossbars # Y00409. In order to have a complete setup with these crossbars that fit your roof, you also need the following parts: - RoundBar End Caps # Y8007026 - BaseLine Towers # Y28TR - RoundBar SL Adapters...
view full answer...
Recommended Fairing for Rola Roof rack on a 2009 Honda Accord Sedan
Yes! Out of the variety of fairings that we have to offer I recommend the 40" long Inno Fairing # INA261 because it will fit perfectly with the 38" long Rola Sport Series Roof Rack # 59757 for your 2009 Honda Accord. If you let me know what you are wanting to use the roof rack for I can make additional recommendations for you. I have also attached an installation video and a picture of this roof rack on a 2009 Accord Sedan that you can reference.
view full answer...
Roof Rack and Ski Carrier to Fit 2019 Hyundai Santa Fe with Naked Roof
Yakima has a really great roof rack for your 2019 Hyundai Santa Fe with a naked roof with the Baseline JetStream bar rack part numbers # Y28TR, # Y06151, # Y06154, and # Y00425 (see attached picture). This will give you an extremely high quality roof rack that has aero bars which will give you minimal wind noise. Then for a ski rack we have the FatCat EVO part # Y03096 which will hold 6 skis or part # Y03095 for up to 4. I attached a review video for this carrier for you to check out as well.
view full answer...
Kayak Rack and Load Assist for a 2018 Toyota Prius Prime Without Glass Roof
Hey, Nick! Happy to help out. The best and easiest kayak rack to use with a load assist is the Thule Hullavator Pro # TH898. One big advantage is that everything is built into the carrier itself, here are no extra parts to remove or store. Personally, I’m not a fan of other load-assist options like the Malone DownLoader # MPG114MD-351XL, since you have to store the Telos legs inside your vehicle while traveling. That’s especially inconvenient if you’re working with a smaller vehicle. I...
view full answer...
How Can I Tell if I have Fixed Mounting Points on My 2015 Mazda CX-5 for a Crossbar System?
According to the specs I have, you may have fixed mounting points on those rubber strips on your 2015 Mazda CX-5. The way you can tell is if there is a small removable tab on those rails that cover the holes. I went ahead and attached a video of a 2015 Mazda CX-5 with fixed mounting points to give you perspective about what to look for. If you determine that you have fixed mounting points, I recommend the following setup: - Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 46" #...
view full answer...
Recommended Roof Rack for Fiat 500x With Panoramic Glass Sunroof
There is a roof rack that will fit your 2016 Fiat 500X that has the panoramic sunroof, the Inno Aero. This rack is made up of Aero Crossbars # INXB100-108, Flush Feet for Aero Crossbars # INXS200, and Custom Fit Kit # INK482. This rack has a 100 lbs weight capacity though I do recommend checking your Fiat's manual to confirm what the actual capacity is. The aero crossbars are going to give you a quiet ride and they also have integrated T-slots so you can carry accessories that way. I've...
view full answer...
Recommended Way to Carry a Kayak for a Ford F-150
As long as you have a 2 inch receiver on your 2016 Ford F-150, I recommend the Rhino-Rack # RTL002. This is one of our better options for kayak carriers and installs directly into your hitch. In addition to this carrier I recommend using a roof rack to secure your kayak to the roof of your truck instead of the foam blocks. If you have the SuperCrew Cab, the Rhino Rack Aero Bar Roof Rack kit is a great option. This include the Crossbars # RRVA150S-2, the Legs # RRRLKVA, and the Fit Kit...
view full answer...
Best Roof Rack for 2020 Kia Telluride With Naked Roof and How Does It Attach
There are two roof configurations for a 2020 Kia Telluride, bare roof and flush side rails. The roof rack system for a bare roof attaches to the door jambs via car clips whereas the system for flush side rails attaches to the flush side rails. I recommend the Yakima JetStream Crossbar System part # Y00426, part # Y28TR, part # Y06125, and part # Y06165 if you have a bare roof. The Yakima Crossbar system is best because it has a custom fit for the best overall look, aero crossbars for...
view full answer...
Roof Rack Fit on 2012 Toyota Venza With Panoramic Sunroof
There is one roof rack that is a confirmed fit for your 2012 Toyota Venza with a panoramic sunroof, though the sunroof should not be opened with the rack on. There isn't a roof rack available for your Venza that is going to allow normal use of the sunroof when the rack is on, but you can remove the rack if you like when you aren't using it in order to utilize the sunroof. The roof rack that fits your '12 Venza with a panoramic roof is an exceptionally nice one from Yakima, and consists...
view full answer...
Will the Thule Force XT L Fit My 2020 BMW X5?
Yes, you will be able to fit the Thule Force XT L # TH6357B on your 2020 BMW X5's roof. Not only do you have enough roof for the required crossbar spread of 23-5/8 - 33 inches, you will also be able to mount the box to your roof and fully open your rear hatch. If you are wanting to go bigger, the Thule Force XT XL # TH6358B and XXL # TH6359B will fit as well. As far as mounting, you will need a crossbar system in order to secure the Force XT XXL to your roof. The setup you need depends...
view full answer...
What do I need to setup a Thule Hullavator on Yakima JetStream Crossbars on a 26 Toyota Highlander?
Great choice Peter, that combo works very well together! Since you already have 60" Yakima JetStream crossbars # Y00428 and a Thule Hullavator # TH898 , you’re most of the way there. The key now is just getting the correct tower and fit kit for your 2026 Highlander roof type. If the Highlander has "Flush Rails" this is the correct fit kit # Y53TR Yakima SkyLine Roof Rack Towers for JetStream Crossbars - Qty 4 # Y66VR Yakima Landing Pad 28 If the Highlander has "No Rails" this is the...
view full answer...
Do You Recommend the Thule Motion XT XL or the Thule Motion XT XXL for My 2021 Nissan Rogue?
In order to determine the compatibility of either the Thule Motion XT XL # TH629806 or the Thule Motion XT XXL # TH629906, it truly depends on if you have a bare roof, raised rails, or a factory roof rack currently installed. The reason why this matters is because not only do crossbars come with different heights and widths, but your roof has different available length based on what roof setup you have. The roof setup is important in determining if you can fully open the rear hatch of your...
view full answer...
Is There A Trailer Hitch Available For A 2019 Honda Civic Sedan With A Center Exhaust
Hi Hamza, Honda Civic models with a center exhaust unfortunately prevent the installation of a trailer hitch so the only way to haul your bike(s) would be to use a trunk mounted bike rack or roof rack mounted bike rack. If you'd prefer a trunk mounted bike rack then I recommend the Yakima FullBack 2 Bike Rack # Y02634. If you want to go with a roof rack mounted back rack and don't currently have a roof rack then you'll need the following components: Yakima JetStream Crossbars # Y00425 BaseLine...
view full answer...
Square Bar Roof Rack that Fits 2020 Ram 1500 Quad Cab
Thule offers a square bar roof rack that fits your 2020 Ram 1500 quad cab with the part # TH712500, # TH710501, and # TH145199. Then for a square bar roof rack the Thule Portage part # TH819 would work great.
view full answer...
Roof Rack and Board Carrier Recommendation for 2016 Toyota Prius V with Glass Roof
For your 2016 Toyota Prius V you will need to install a roof rack to carry the boards you mentioned. Unfortunately only Yakima makes roof racks for your vehicle and they aren't exactly super cheap. So for that you would want the Yakima CoreBar part numbers # Y00425, # Y28TR, # Y06117, # Y06174. Which with that you'd be able to use the LockRack kpart # LR59FR that you referenced. This will attach to the crossbar by the top channel.
view full answer...
Will a Yakima Roof Rack System Fit My 2020 Toyota Highlander LE?
I confirmed with Yakima that mounting points that are on your bare roof of your 2020 Toyota Highlander will fit a roof rack system. After you pop off the tab that covers the mounting points, there is a screw that you will use to attach a roof rack system. I went ahead and attached a video that shows how you would attach a Yakima roof rack system on the 2020 Toyota Highlander. For the parts you need for that setup, you will need the following parts: - Yakima JetStream Crossbars - Aluminum...
view full answer...
Compatibility of 3 Bike Rack on 2015 Toyota Prius
The Reese Q-Slot Platform-Style 2 Bike Rack is a fit for your 2015 Prius but has been discontinued. If you already have the rack it will work very well for you. I recommend using the included pin and clip for a secure fit in the hitch and then using a cable lock like # e98891 to secure your bikes to the rack. The 2 inch receiver only Reese Q-Slot Platform-Style 2 Bike and 4 Bike Rack PS63138 (also discontinued) was a 2 or 4 bike carrier, but would NOT work on your 2015 Toyota Prius...
view full answer...
Can Yakima Roof Rack From 2000 Ford F250 Be Used On A 2025 Ford F350?
Hello Lori, thanks for reaching out. You may be able to re use certain components from your old Yakima roof rack, but I would need to know specifically what parts you have in order to say for sure. If you have the Yakima BaseLine towers like part # Y28TR, those could be used on the 2025 F350, you would just need a new fit kit # Y06185. You might be able to re use you crossbars but again it depends what you have. Yakima recommends a 58" or 60" crossbar for the 2025 F350. If you can tell...
view full answer...
Which Size Crossbars for Thule Hullavator Pro on 2026 Ford F-350
Hi Tom! I just got to this one so I'm guessing you're going with the Thule Hullavator Pro # TH898 for your setup. I don't have the exact measurement for the 60" bars but it looks like it is too close to call. It will be 4-8" on the top. The 70" bar setup would be best, and it won't be too wide for your truck. Once again you will need the following: -BaseLine Towers for Yakima Crossbars # Y28TR -BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06185 -Yakima JetStream Crossbars...
view full answer...
Recommended Roof Rack for a 2022 Honda Insight
Hey Andy! The 50" crossbars on the Yakima BaseLine Roof Rack Kit item # Y88UB can be swapped out but the next largest size is the 60" Long item # Y00429 so I do not think that's going to be a viable option. By law the crossbars are not supposed to stick out past the rear view mirrors. If you want to pursue this option you'll need the following parts: BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 item # Y28TR BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item...
view full answer...
Recommended Rhino Rack Roof Rack With Bike Rack And Surfboard Carrier For 2015 Ford F-150
For your 2015 Ford F-150 SuperCrew Cab, I recommend the Rhino Rack Roof Rack consisting of: Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 59" Long - Qty 2, # RRVA150B-2 Rhino-Rack 2500 Series Legs for Vortex Aero Crossbars - Qty 4 # RRRLKVA Custom DK Fit Kit for Rhino-Rack 2500 Series Roof Rack Legs - Naked Roof # DK427 The custom fit kit is designed to specifically fit your vehicle curves and prevent marring and scratches as you mentioned. This kit is rated to carry 165 lbs....
view full answer...
What is Needed to Attach Yakima JetStream Crossbars to 2017 Honda CR-V With Bare Roof
Hello Zeke, So we can get your 2017 Honda CR-V set up to mount Yakima JetStream Crossbars # Y00425, though there aren't actually different options for this. Reason for that is you can't mix and match different manufacturers parts because they won't fit together. That means to put the JetStream crossbars on the bare roof of your 2017 Honda CR-V you would have to use the following parts: - BaseLine Towers for Yakima Crossbars - Naked Roofs # Y28TR - BaseClip Fit Kit # Y06188 - BaseClip...
view full answer...
Recommended Roof Rack and Bike Rack for a 2016 Lexus GSF
The best option to transport a bike with your 2016 Lexus GSF is going to be to install a roof rack and attach a bike rack. The trunk mounted ones like item # SA805BL have mixed results and won't work with cars with spoilers. It doesn't look like your Lexus has any rails so to add a roof rack you will need the following parts: Yakima JetStream Crossbars - Aluminum - Black - 50" Long - Qty 2 item # Y00425 BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 item # Y28TR BaseClip...
view full answer...
Roof Rack for Carrying a Canoe/Kayak on a 2014 Subaru Impreza with a Naked Roof
While we do have roof racks for your 2014 Subaru Impreza, the (discontinued) Custom Fit Kit WB-K473 you referenced is for various years and models of GM pickups and there isn't a Whispbar roof rack currently in production that fits your vehicle. If you like the higher quality of a Whispbar product then you'll want to go with a Yakima roof rack as they actually manufacture the Whispbar brand. From what you were looking at I'm guessing you have a Sedan that isn't the WRX. For this you'll...
view full answer...
Roof Rack and Cargo Box Recommendation for 2017 Honda Accord Sedan
The Yakima roof rack you referenced part numbers # Y00408, # Y28TR, # Y03536, and # Y06148 is a confirmed fit for your 2017 Honda Accord sedan and would be an excellent option for carrying a roof cargo box. Then for a cargo box the Thule Force part # TH6357B would fit this rack and work great. I attached a review video for this box installed on a similar sized vehicle as your Accord sedan. I really like the Thule roof racks and cargo baskets as they are very well made, easy to use, and...
view full answer...
How Can I Tell if I have Fixed Mounting Points on My 2015 Mazda CX-5 for a Crossbar System?
According to the specs I have, you may have fixed mounting points on those rubber strips on your 2015 Mazda CX-5. The way you can tell is if there is a small removable tab on those rails that cover the holes. I went ahead and attached a video of a 2015 Mazda CX-5 with fixed mounting points to give you perspective about what to look for. If you determine that you have fixed mounting points, I recommend the following setup: - Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 46" #...
view full answer...
Ski Rack and Roof Rack Recommendations for a 2018 Subaru Legacy
How you transport is really up to you. Your 2018 Subaru Legacy is still extremely new, so fits are being added all the time, and Subarus have a reputation for being incredibly flexible. If you want to go with the full rack, or have other possible items to carry like bikes, kayaks or cargo, I recommend using a Yakima roof rack system. This has the added benefit of letting you use a wide variety of accessories and adds a more rough and tumble look to the car. To add this kit to your vehicle,...
view full answer...
Components Needed To Mount Yakima RoundBars On A 2024 Kia Seltos With A Naked Roof
Hey Jason, Yes, you can get the Yakima BaseLine Roof Rack for Naked Roofs # Y64PJ without the crossbars, you'll just need to order each component separately: BaseLine Towers for Yakima Crossbars # Y28TR RoundBar SL Adapter # Y03536 BaseClip Fit Kit # Y06130 (front clips) BaseClip Fit Kit # Y06132 (rear clips) If you need anything else or if you have factory rails let me know.
view full answer...
Recommended Kayak Carrier for 2020 Mazda CX-5
The only hitch mounted option wouldn't be an actual carrier, but a support like the Malone Axis # MAL32VR. This would require the installation of a trailer hitch like the # 76138 you looked at. More than likely you won't need this to mount your kayaks on your 2020 Mazda CX-5. Your kayaks will fit completely on a roof rack with a kayak carrier like the one seen in the picture below unless they are incredibly long. If that is the case, then by all means you could add the # MAL32VR to help...
view full answer...
Comparing Yakima Baseline and Skyline Towers on 2015 Mazda CX-5
When comparing the height of each option, the lowest Yakima Roof Rack for your vehicle consists of the Yakima RoundBar SL Adapter # Y03536 to utilize your previous Yakima round bars, the BaseLine Towers # Y28TR, the BaseClip Fit Kit # Y06130 and # Y06132. Overall this system will be about an inch shorter than the Skyline tower and base option.
view full answer...
Recommended Roof Rack For A 2021 Kia Seltos With A Naked Roof
Yes there is, so for your 2021 Kia Seltos I recommend taking a look at the: -Yakima JetStream Crossbars # Y00425, with the BaseLine Towers for Yakima Crossbars # Y28TR, and the BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06130 & # Y06132. The great part about this rack, apart from the 165-lbs weight capacity, is that it will also work great with naked roofs like what's on your 2021 Kia Seltos by using the DropHook clip holder. I have also included an installation video on...
view full answer...
Yakima Jetstream Roof Rack for Use with Thule Hullavator TH898 on 2018 Toyota Highlander
The Thule Hullavator load-assisted kayak carrier # TH898 will directly mount onto just about any roof rack bar shapes, including round, square, aero, elliptical, most factory crossbars, and most crossbars with top "T-slot" channels. Yakima Jetstream bars will work fine so long as they are long enough. The most important compatibility requirements for mounting the Hullavator are that the cross bars extend out past the rack legs and by no less than 4 -inches and that they be at least 24-inches...
view full answer...
Will the Yakima SteelHead Roof Mounted Bike Carrier Fit Aero Crossbars on a 2017 Toyota Highlander
In order to use the Yakima SteelHead Roof Mounted Bike Carrier on your 2017 Toyota Highlander you would need to install a round bar system like the Yakima Roof Rack System part # Y00408, part # Y53TR, part # Y03536, and part # Y00242 if you have flush side rails or the Yakima Roof Rack System part # Y00409, part # Y28TR, part # Y03536, and part # Y06130 if you have a bare roof. If you want to keep the roof rack you have now then I recommend selling the SteelHead and buying the Yakima...
view full answer...
Recommended Roof Rack for a 2023 Mazda CX-5 to Use the Thule Hullavator Pro Kayak Carrier
In order to use the Thule Hullavator Pro # TH898 on your 2023 Mazda CX-5 you will need to have a roof rack with crossbars that extend 4"-8" past the roof rack feet. If you have a roof that has no existing crossbars or rails, I recommend the 2023 Mazda CX-5 Roof Rack by Yakima which consist of the: - Yakima HD Crossbars # Y01156 - BaseLine Towers for Yakima Crossbars # Y28TR - HD Bar SL Adapter # Y03541 - BaseClip Fit Kit # Y06130 - BaseClip Fit Kit # Y06154 If you have flush mounted...
view full answer...
Roof Rack Recommendation to Carry Thule Pulse Box on 2018 Toyota Highlander
In order to carry the Thule Pulse Large Rooftop Cargo Box # TH615 on your 2018 Toyota Highlander you will need crossbars that are perpendicular to your vehicle body so that the box can be parallel with the vehicle body. I really like the Yakima JetStream roof rack system because the crossbars are higher quality with that aero-style design and the legs have adjustments so you get the best fit possible. I'm guessing you have a naked roof but in the event that you do have the flush mount rails...
view full answer...
Yakima Roof Rack Components Recommendation to Fit 2019 Mazda CX 5
The Yakima Landing Pad 19 # Y00245 that you referenced has been confirmed by Yakima to fit the Skyline and Control Towers like you mentioned. Glad it worked for you as well! For the 2019 Mazda CX-5 Yakima recommends the BaseClip part # Y06130 and part # Y06154 when used with JetStream bars # Y00425 and BaseLine Towers part # Y28TR.
view full answer...
Base Clips For Yakima Roof Rack Towers On A 2018 Toyota Corolla
It looks like all of the Yakima roof racks that are confirmed to fit your 2018 Toyota Corolla use BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06130 and BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06170. To confirm, you can give me more information about your roof rack that you have and I will make sure this is the correct clip set. I have attached a demonstration video to show you how these clips install.
view full answer...
Roof Rack System Similar to the Yakima Whispbar for a 2017 Subaru Legacy
I do have a similar roof rack system for your 2017 Subaru Legacy but the Yakima Whispbar Roof Rack System has since been discontinued in favor of the Yakima JetStream Roof Rack System. In order to mount the Yakima JetStream Roof Rack System to the roof of your vehicle you will want to use part # Y00426, part # Y28TR, part # Y06145, and part # Y06130. I have added a review video of this system for you as well.
view full answer...
Recommended Roof Rack System For 2015 Mazda 3 For a Roof Top Tent
I would be happy to recommend a roof rack for your 2014 Mazda 3 5 Door Hatchback for carrying a 165lb Roofnest Rooftop Tent. If your Mazda 3 has fixed mounting points on the roof I recommend the Yakima Roof Rack System which uses 50" Yakima JetStream Crossbars # Y00425, SkyLine Towers for Yakima Crossbars # Y53TR, and Landing Pads # Y00248. If your Mazda 3 does NOT have fixed mounting points then I recommend the Yakima Roof Rack System which uses 60" Yakima JetStream Crossbars - Aluminum...
view full answer...
Recommended Roof Rack to Use the Yakima SideWinder on a 2018 Toyota Highlander LTD
I recommend installing a Yakima JetStream roof rack on your 2018 Toyota Highlander because they provide a clean looking installation that allows you to utilize the full 165 lb weight capacity and can be keyed alike with your SideWinder # Y02071. If you have a naked roof (no rails running from front to back) then you need the 60" JetStream Bars # Y00426 the BaseLine Towers # Y28TR, and the BaseClip # Y06130. For flush mount rails you would instead need the 50" JetStream Bars # Y00425,...
view full answer...
Yakima Roof Rack Landing Pad 16 Wont Line Up On 2019 Toyota Highlander
There are two roof configurations on a 2019 Toyota Highlander, bare roof and flush side rails. The Landing Pad 16 part # Y00242 is designed for models with flush side rails. If you have a bare roof you need to use the BaseClip Fit Kit part # Y06130. I think you might be looking at the pre-drilled holes in the roof used to attach the flush side rails from the factory and if so these can't be used and you would have to use the rack for bare roof models. I have attached a video below of the...
view full answer...
Will the Malone DownLoader Fit on Yakima Roof Rack Crossbars
Yes, the Malone DownLoader # MPG114MD-351XL is designed to fit on virtually all available aftermarket crossbar shapes and most factory bars, so this would work well with a Yakima roof rack like the one for a 2016 Avalon that uses parts # Y00425, # Y28TR, # Y06130, # Y06131. The DownLoader is an awesome solution to help make loading and unloading your kayak a breeze, and the system comes with cam buckle load straps to help you secure the boat. I've linked some review videos of these parts...
view full answer...
Best Roof Rack and Kayak Carrier for a 2019 Hyundai Tuscon w/ Bare Roof
I would be happy to help you set your 2019 Hyundai Tucson up to transport your kayaks. You are going to need a roof rack but lets start with the kayak carrier. I recommend the Thule Compass Kayak and SUP Carrier w/ Tie-Downs - J-Style, Post Style, or Saddle - 2 Kayaks or SUPs item # TH890000. The Compass allows you to transport two kayaks on your roof rack crossbars. You will be able to carry in the stacker, J-style, or saddle position to maximize usable space on your crossbars. This carrier...
view full answer...
Recommended Roof Crossbars and J-Style Kayak Carrier for a 2018 Toyota Corolla
We have just what you need for your 2018 Toyota Corolla! I recommend checking out the Yakima JetStream Crossbars # Y00425 with the BaseLine Towers for Yakima Crossbars # Y28TR, & the BaseClip Fit Kit for Yakima BaseLine Roof Rack # Y06130 & # Y06170. These crossbars will easily attach to your Corolla's naked roof, has a 165-lbs weight capacity, and will allow you to use a set of J-Style kayak carriers like the Thule Compass Kayak Roof Rack w/ Tie-Downs # TH890000. Since you're interested...
view full answer...
Recommended Roof Rack For A 2018 Mazda CX-5
You will not remove the plastic strips on your 2018 Mazda CX-5 when you install a roof rack that is compatible with your vehicle. Aesthetics aside, none of the roof racks I have installed on the naked roofs of my personal vehicles have ever leaked. I do like the Inno option: Inno Aero Crossbars - Aluminum - Black - 42" Long and 45" Long - Qty 2, part # INXB108-115 Inno Flush Feet for Aero Crossbars - Naked Roofs - Qty 4, part # INXS200 Custom Fit Kit for Inno XS200, XS250, and INSUT Roof...
view full answer...
Rear Yakima Roof Rack Bar Sits Higher than Front Bar on a 2016 Toyota Avalon
You will want the Yakima roof rack on your 2016 Toyota Avalon as level as possible, but due to the different strength points on a roof and the differing heights of the towers it isn't uncommon for crossbars to be a little out of level with each other. They shouldn't be so far out of level that is causes issues with accessories fitting though, which is the main concern. With all of that being said, it is always a good idea to double check your installation just to make sure you have everything...
view full answer...
What Roof Rack do You Recommend for My 2014 Mazda 6 with a Sunroof?
Yes! You can definitely install this roof rack to your 2014 Mazda 6 with a sunroof: - Yakima JetStream Crossbars - Aluminum - Black - 50" # Y00425 - BaseLine Towers for Yakima Crossbars - Naked Roofs # Y28TR - BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06130 - BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06132 - Yakima Same-Key Lock Cores # Y07204 Although, it is important to make sure you have enough height on the roof rack for the sunroof to operate. While...
view full answer...
Paddleboard Carrier and Roof Rack Recommendation for 2017 Mazda CX-5
The Yakima Paddleboard Carrier SUPDawg part # Y04075 that you referenced will be a great option, but let's get you set up with a roof rack on your 2017 Mazda CX-5 first. For that the Yakima aero bar roof rack that consists of part numbers # Y00425, # Y28TR, # Y06130, and # Y06154 is a confirmed fit and would work well. The bars of this give the least amount of wind resistance which means minimal wind noise.
view full answer...
Rhino Rack Cargo Basket and Roof Rack for a 2016 Mazda CX-5
You are correct. Since the Rhino Rack kit will be installing onto the fixed points of your roof, you'll always have the 43 inch crossbar spread. This kit consists of: 46 inch Vortex Aero Crossbars, Black, part # RRVA118B-2 2500 Series Legs, part # RRRLKVA Custom DK Fit Kit, part # DK289 The good thing about the Rhino Rack Cargo Basket, part # RMCB02 is that the tracks are on a slide, so you can adjust forward and backwards to correctly fit your vehicle. When you're at the maximum,...
view full answer...
How Can I Tell if I have Fixed Mounting Points on My 2015 Mazda CX-5 for a Crossbar System?
According to the specs I have, you may have fixed mounting points on those rubber strips on your 2015 Mazda CX-5. The way you can tell is if there is a small removable tab on those rails that cover the holes. I went ahead and attached a video of a 2015 Mazda CX-5 with fixed mounting points to give you perspective about what to look for. If you determine that you have fixed mounting points, I recommend the following setup: - Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 46" #...
view full answer...
Ski Rack and Roof Rack Recommendations for a 2018 Subaru Legacy
How you transport is really up to you. Your 2018 Subaru Legacy is still extremely new, so fits are being added all the time, and Subarus have a reputation for being incredibly flexible. If you want to go with the full rack, or have other possible items to carry like bikes, kayaks or cargo, I recommend using a Yakima roof rack system. This has the added benefit of letting you use a wide variety of accessories and adds a more rough and tumble look to the car. To add this kit to your vehicle,...
view full answer...
Components Needed To Mount Yakima RoundBars On A 2024 Kia Seltos With A Naked Roof
Hey Jason, Yes, you can get the Yakima BaseLine Roof Rack for Naked Roofs # Y64PJ without the crossbars, you'll just need to order each component separately: BaseLine Towers for Yakima Crossbars # Y28TR RoundBar SL Adapter # Y03536 BaseClip Fit Kit # Y06130 (front clips) BaseClip Fit Kit # Y06132 (rear clips) If you need anything else or if you have factory rails let me know.
view full answer...
Recommended Kayak Carrier for 2020 Mazda CX-5
The only hitch mounted option wouldn't be an actual carrier, but a support like the Malone Axis # MAL32VR. This would require the installation of a trailer hitch like the # 76138 you looked at. More than likely you won't need this to mount your kayaks on your 2020 Mazda CX-5. Your kayaks will fit completely on a roof rack with a kayak carrier like the one seen in the picture below unless they are incredibly long. If that is the case, then by all means you could add the # MAL32VR to help...
view full answer...
Comparing Yakima Baseline and Skyline Towers on 2015 Mazda CX-5
When comparing the height of each option, the lowest Yakima Roof Rack for your vehicle consists of the Yakima RoundBar SL Adapter # Y03536 to utilize your previous Yakima round bars, the BaseLine Towers # Y28TR, the BaseClip Fit Kit # Y06130 and # Y06132. Overall this system will be about an inch shorter than the Skyline tower and base option.
view full answer...
Recommended Roof Rack For A 2021 Kia Seltos With A Naked Roof
Yes there is, so for your 2021 Kia Seltos I recommend taking a look at the: -Yakima JetStream Crossbars # Y00425, with the BaseLine Towers for Yakima Crossbars # Y28TR, and the BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06130 & # Y06132. The great part about this rack, apart from the 165-lbs weight capacity, is that it will also work great with naked roofs like what's on your 2021 Kia Seltos by using the DropHook clip holder. I have also included an installation video on...
view full answer...
Yakima Jetstream Roof Rack for Use with Thule Hullavator TH898 on 2018 Toyota Highlander
The Thule Hullavator load-assisted kayak carrier # TH898 will directly mount onto just about any roof rack bar shapes, including round, square, aero, elliptical, most factory crossbars, and most crossbars with top "T-slot" channels. Yakima Jetstream bars will work fine so long as they are long enough. The most important compatibility requirements for mounting the Hullavator are that the cross bars extend out past the rack legs and by no less than 4 -inches and that they be at least 24-inches...
view full answer...
Will the Yakima SteelHead Roof Mounted Bike Carrier Fit Aero Crossbars on a 2017 Toyota Highlander
In order to use the Yakima SteelHead Roof Mounted Bike Carrier on your 2017 Toyota Highlander you would need to install a round bar system like the Yakima Roof Rack System part # Y00408, part # Y53TR, part # Y03536, and part # Y00242 if you have flush side rails or the Yakima Roof Rack System part # Y00409, part # Y28TR, part # Y03536, and part # Y06130 if you have a bare roof. If you want to keep the roof rack you have now then I recommend selling the SteelHead and buying the Yakima...
view full answer...
Recommended Roof Rack for a 2023 Mazda CX-5 to Use the Thule Hullavator Pro Kayak Carrier
In order to use the Thule Hullavator Pro # TH898 on your 2023 Mazda CX-5 you will need to have a roof rack with crossbars that extend 4"-8" past the roof rack feet. If you have a roof that has no existing crossbars or rails, I recommend the 2023 Mazda CX-5 Roof Rack by Yakima which consist of the: - Yakima HD Crossbars # Y01156 - BaseLine Towers for Yakima Crossbars # Y28TR - HD Bar SL Adapter # Y03541 - BaseClip Fit Kit # Y06130 - BaseClip Fit Kit # Y06154 If you have flush mounted...
view full answer...
Roof Rack Recommendation to Carry Thule Pulse Box on 2018 Toyota Highlander
In order to carry the Thule Pulse Large Rooftop Cargo Box # TH615 on your 2018 Toyota Highlander you will need crossbars that are perpendicular to your vehicle body so that the box can be parallel with the vehicle body. I really like the Yakima JetStream roof rack system because the crossbars are higher quality with that aero-style design and the legs have adjustments so you get the best fit possible. I'm guessing you have a naked roof but in the event that you do have the flush mount rails...
view full answer...
Yakima Roof Rack Components Recommendation to Fit 2019 Mazda CX 5
The Yakima Landing Pad 19 # Y00245 that you referenced has been confirmed by Yakima to fit the Skyline and Control Towers like you mentioned. Glad it worked for you as well! For the 2019 Mazda CX-5 Yakima recommends the BaseClip part # Y06130 and part # Y06154 when used with JetStream bars # Y00425 and BaseLine Towers part # Y28TR.
view full answer...
Base Clips For Yakima Roof Rack Towers On A 2018 Toyota Corolla
It looks like all of the Yakima roof racks that are confirmed to fit your 2018 Toyota Corolla use BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06130 and BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06170. To confirm, you can give me more information about your roof rack that you have and I will make sure this is the correct clip set. I have attached a demonstration video to show you how these clips install.
view full answer...
Roof Rack System Similar to the Yakima Whispbar for a 2017 Subaru Legacy
I do have a similar roof rack system for your 2017 Subaru Legacy but the Yakima Whispbar Roof Rack System has since been discontinued in favor of the Yakima JetStream Roof Rack System. In order to mount the Yakima JetStream Roof Rack System to the roof of your vehicle you will want to use part # Y00426, part # Y28TR, part # Y06145, and part # Y06130. I have added a review video of this system for you as well.
view full answer...
Recommended Roof Rack System For 2015 Mazda 3 For a Roof Top Tent
I would be happy to recommend a roof rack for your 2014 Mazda 3 5 Door Hatchback for carrying a 165lb Roofnest Rooftop Tent. If your Mazda 3 has fixed mounting points on the roof I recommend the Yakima Roof Rack System which uses 50" Yakima JetStream Crossbars # Y00425, SkyLine Towers for Yakima Crossbars # Y53TR, and Landing Pads # Y00248. If your Mazda 3 does NOT have fixed mounting points then I recommend the Yakima Roof Rack System which uses 60" Yakima JetStream Crossbars - Aluminum...
view full answer...
Recommended Roof Rack to Use the Yakima SideWinder on a 2018 Toyota Highlander LTD
I recommend installing a Yakima JetStream roof rack on your 2018 Toyota Highlander because they provide a clean looking installation that allows you to utilize the full 165 lb weight capacity and can be keyed alike with your SideWinder # Y02071. If you have a naked roof (no rails running from front to back) then you need the 60" JetStream Bars # Y00426 the BaseLine Towers # Y28TR, and the BaseClip # Y06130. For flush mount rails you would instead need the 50" JetStream Bars # Y00425,...
view full answer...
Yakima Roof Rack Landing Pad 16 Wont Line Up On 2019 Toyota Highlander
There are two roof configurations on a 2019 Toyota Highlander, bare roof and flush side rails. The Landing Pad 16 part # Y00242 is designed for models with flush side rails. If you have a bare roof you need to use the BaseClip Fit Kit part # Y06130. I think you might be looking at the pre-drilled holes in the roof used to attach the flush side rails from the factory and if so these can't be used and you would have to use the rack for bare roof models. I have attached a video below of the...
view full answer...
Will the Malone DownLoader Fit on Yakima Roof Rack Crossbars
Yes, the Malone DownLoader # MPG114MD-351XL is designed to fit on virtually all available aftermarket crossbar shapes and most factory bars, so this would work well with a Yakima roof rack like the one for a 2016 Avalon that uses parts # Y00425, # Y28TR, # Y06130, # Y06131. The DownLoader is an awesome solution to help make loading and unloading your kayak a breeze, and the system comes with cam buckle load straps to help you secure the boat. I've linked some review videos of these parts...
view full answer...
Best Roof Rack and Kayak Carrier for a 2019 Hyundai Tuscon w/ Bare Roof
I would be happy to help you set your 2019 Hyundai Tucson up to transport your kayaks. You are going to need a roof rack but lets start with the kayak carrier. I recommend the Thule Compass Kayak and SUP Carrier w/ Tie-Downs - J-Style, Post Style, or Saddle - 2 Kayaks or SUPs item # TH890000. The Compass allows you to transport two kayaks on your roof rack crossbars. You will be able to carry in the stacker, J-style, or saddle position to maximize usable space on your crossbars. This carrier...
view full answer...
Recommended Roof Crossbars and J-Style Kayak Carrier for a 2018 Toyota Corolla
We have just what you need for your 2018 Toyota Corolla! I recommend checking out the Yakima JetStream Crossbars # Y00425 with the BaseLine Towers for Yakima Crossbars # Y28TR, & the BaseClip Fit Kit for Yakima BaseLine Roof Rack # Y06130 & # Y06170. These crossbars will easily attach to your Corolla's naked roof, has a 165-lbs weight capacity, and will allow you to use a set of J-Style kayak carriers like the Thule Compass Kayak Roof Rack w/ Tie-Downs # TH890000. Since you're interested...
view full answer...
Recommended Roof Rack For A 2018 Mazda CX-5
You will not remove the plastic strips on your 2018 Mazda CX-5 when you install a roof rack that is compatible with your vehicle. Aesthetics aside, none of the roof racks I have installed on the naked roofs of my personal vehicles have ever leaked. I do like the Inno option: Inno Aero Crossbars - Aluminum - Black - 42" Long and 45" Long - Qty 2, part # INXB108-115 Inno Flush Feet for Aero Crossbars - Naked Roofs - Qty 4, part # INXS200 Custom Fit Kit for Inno XS200, XS250, and INSUT Roof...
view full answer...
Rear Yakima Roof Rack Bar Sits Higher than Front Bar on a 2016 Toyota Avalon
You will want the Yakima roof rack on your 2016 Toyota Avalon as level as possible, but due to the different strength points on a roof and the differing heights of the towers it isn't uncommon for crossbars to be a little out of level with each other. They shouldn't be so far out of level that is causes issues with accessories fitting though, which is the main concern. With all of that being said, it is always a good idea to double check your installation just to make sure you have everything...
view full answer...
What Roof Rack do You Recommend for My 2014 Mazda 6 with a Sunroof?
Yes! You can definitely install this roof rack to your 2014 Mazda 6 with a sunroof: - Yakima JetStream Crossbars - Aluminum - Black - 50" # Y00425 - BaseLine Towers for Yakima Crossbars - Naked Roofs # Y28TR - BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06130 - BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06132 - Yakima Same-Key Lock Cores # Y07204 Although, it is important to make sure you have enough height on the roof rack for the sunroof to operate. While...
view full answer...
Paddleboard Carrier and Roof Rack Recommendation for 2017 Mazda CX-5
The Yakima Paddleboard Carrier SUPDawg part # Y04075 that you referenced will be a great option, but let's get you set up with a roof rack on your 2017 Mazda CX-5 first. For that the Yakima aero bar roof rack that consists of part numbers # Y00425, # Y28TR, # Y06130, and # Y06154 is a confirmed fit and would work well. The bars of this give the least amount of wind resistance which means minimal wind noise.
view full answer...
Rhino Rack Cargo Basket and Roof Rack for a 2016 Mazda CX-5
You are correct. Since the Rhino Rack kit will be installing onto the fixed points of your roof, you'll always have the 43 inch crossbar spread. This kit consists of: 46 inch Vortex Aero Crossbars, Black, part # RRVA118B-2 2500 Series Legs, part # RRRLKVA Custom DK Fit Kit, part # DK289 The good thing about the Rhino Rack Cargo Basket, part # RMCB02 is that the tracks are on a slide, so you can adjust forward and backwards to correctly fit your vehicle. When you're at the maximum,...
view full answer...
Roof Rack to Mount Two Thule Hullavators on 2017 Toyota Highlander
Hi Patty; it is definitely possible to mount two of the Thule Hullavator # TH898 on your 2017 Highlander. To make sure you have enough space I recommend getting a roof rack from Yakima with 60" crossbars. The best and quietest option is the JetStream roof rack. You will need one of the following based on the roof of your Highlander: -Yakima JetStream Roof Rack # Y39AB (If you have no existing rails or crossbars) -Yakima JetStream Roof Rack # Y47TB (If you have flush mounted rails) If...
view full answer...

< Previous

12 3

Next >

Do you have a question about this Roof Rack?

Info for this part was:

Video Edited:

Chris R

Updated by:

Wilson B

Updated by:

Michael B

Edited by:

Daron K

Written by:

Alex H

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.