Product Experts Available Now!
Call 1-800-940-8924
Round Snap Ring Swivel Trailer Jack w/ Footplate - Sidewind - 10-1/2" Lift - 2,000 lbs - Weld
(800 reviews)
Price: $54.96
In Stock
We'll connect you with nearby partnered installers who know this exact setup.
Round Snap Ring Swivel Trailer Jack w/ Footplate - Sidewind - 10-1/2" Lift - 2,000 lbs - Weld
Part Number: TJB-2001S-B
In Stock
$54.96
We'll connect you with nearby partnered installers who know this exact setup.
- All Info
- Reviews (800)
- Q & A (0)
- Photos
etrailer Trailer Jack - TJB-2001S-B
Highlights
- 2,000-Lb Lift Strength: Handles heavy tongue weights for stable raising and lowering of loaded trailers.
- 10-1/2" Lift Range: Provides 10" retracted to 20-1/2" extended height for flexible trailer positioning.
- Quick Swivel Action: Spring-loaded 1/2" pull pin lets you swing the jack up for travel or down for use fast.
- Durable Weld-On Mount: Snap-ring bracket welds to frame and removes easily for coating or replacement.
- Built to Last: Black powder-coated outer tube and zinc-plated inner tube resist rust and corrosion.
- Steady Footing: 7-1/2" x 3-3/4" welded footplate spreads weight to reduce sinking in soft ground.
Features to know about
Smooth Trailer Setup: Swivel Design Keeps Things Simple
Getting a trailer leveled or hitched shouldn’t mean wrestling with tools or awkward angles. This Round Snap Ring Swivel Jack w/ Footplate makes the job easy thanks to its retaining-ring swivel design. Just pull the 1/2" spring-loaded pin and the jack swings up for travel or down for use. The deep-seated retaining ring keeps it steady under side load, so it feels solid every time. With 10-1/2" of lift, it’s right in the sweet spot for raising and lowering without fuss.
Built to Handle Real-World Loads: 2,000 lbs of Reliable Lift
From small equipment trailers to fully loaded haulers, this jack’s 2,000 lb lift capacity covers the heavy lifting without complaint. It’s built with a 2-1/4" outer tube and a 2" inner tube for strength and stability. The welded-on footplate spreads the load to keep the jack from sinking in soft ground, so it stays dependable whether it’s gravel, dirt, or asphalt underneath.
Ready for the Elements: Corrosion-Resistant Finishes That Last
Rain, mud, and time can eat through cheap jacks fast, but this one’s built to last. The outer tube has a black powder coat that resists corrosion, while the inner tube and footplate are finished in clear zinc for added protection. Even the sidewind handle is zinc plated, keeping it smooth to crank and sharp-looking season after season.
Quick to Install and Easy to Maintain: Weld-On Mount and Grease Zerk Included
The included weld-on mounting bracket keeps installation straightforward and secure. Once in place, the snap ring lets you remove or reinstall the jack when needed—handy for maintenance or refinishing. A built-in grease zerk makes lubrication simple, keeping the gears moving smoothly with minimal effort. This jack is built for everyday use and quick upkeep, plain and simple.
Specs
Bracket Height
- Retracted: 10"
- Extended: 20-1/2"
Lift
- Lift: 10-1/2"
Tube Dimensions
- Outer tube diameter: 2-1/4"
- Inner tube diameter: 2"
Footplate Dimensions
- Length: 7-1/2"
- Width: 3-3/4"
Mounting Bracket Dimensions
- Width: 5"
- Height: 4-1/4"
Handle
- Handle radius: 6-1/2"
Weight Capacity
- Lift capacity: 2,000 lbs
Warranty
- Warranty period: 1-Year warranty
Product Specifications
TJB-2001S-B Ram Round Snap Ring Swivel Jack w Footplate - Weld On - Black - Side Wind - 10-1/2" Travel - 2K
Compare to Pro Series PS1401020303
Similar to BD151101 and BD151109 Bulldog Swivel Trailer Jacks (Except with Powder Coat Finish); Similar to PS1401020303 Pro Series Swivel Trailer Jack
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
- Product did not meet expectations
- Wrong item was ordered
Ratings & Reviews
4.8
800 reviews
by:
Stuart
08/15/2026
This product is well made and is perfect for my application. Thank you for providing a quality trailer jack that truely represents as described.
by:
F
07/27/2026
It snapped right onto the old 2 1/2 inch bracket, I didn't need to weld the new bracket on
by:
Scott
06/26/2026
As described and fast shipping, great job!!
by:
Kevin
10/16/2026
works as expected.
by:
Bruce
04/29/2019
I welded this jack onto the 6x2 frame with the mounting bracket rotated flange down for better support and slightly increased height. Jack performs well under load.
by:
Karl
11/03/2018
The product worked exactly as I thought it would. The jacks are extremely high-quality heavy duty and a great value. I have come to expect this kind of quality and service from etrailer. I ordered it in the morning I had confirmation and shipment within 24 hours. I love the videos that etrailer puts on their site to understand the product .
by:
Robert
04/25/2026
Looks like a quality product.
by:
Mark
12/30/2025
Looks like a quality product and will try to get it mounted next week. Delivery time was awesome!
by:
John
01/07/2019
The four jacks appear to be of good heavy duty quality. The handle has good movement (turns easily) and also seems well designed. The foot plate is 7" long. The pivot and lock plate engages easily. Quick shipping. The item arrived with some package damage but the heavy duty items were not damaged. Very happy with the value and ease of purchase. .
by:
JPK
11/15/2016
Ordered 4 weld on trailer jacks on Tuesday over lunch and they were delivered Thursday--free shipping! Price was very competitive and great service! Keep it up guys...
by:
Chris
08/05/2018
seems to be a great quality trailer jack. just as described. etrailer just has so much useful info. on there easy to navigate site and fast shipping. Highly recommend using them to anyone looking for great parts and accessories.
by:
Mike
07/22/2020
Fast delivery, easy set up. I already had a standard weld on style jack plate from the previous jack... So I simply removed the broken jack and installed this new one, and used the previous snap ring and we were good to go.
by:
Michael
03/30/2019
The TJB-2011S-B fit my existing snap-on mount, so I was very happy. The delivery was excellent due to the service department and shipping department quickly processing the order! Thank you.
by:
Bryan
05/30/2024
Built a kayak trailer and welded it on. Has preformed great!
by:
Kerry
05/16/2019
Just what I was looking for! Prompt delivery! Etrailer seems to always have what I need.
by:
Chris
12/31/2021
Although it was on back order George J kept me in the loop as to what was happening and how soon it would arrive. The product came to me in great shape and can't wait to get them installed
by:
Jode Z
10/05/2017
Great price and quick shipping
by:
john
06/14/2017
works perfect on my sawmill trailer
by:
Lance
08/16/2021
I was surprised at how fast it arrived. It was a perfect fit for my trailer !Thanks for getting it right!!
by:
Clifford
08/10/2022
I got two packages that day. One from China, one from etrailer. The china box was well sealed and fit in the box perfectly, the etrailer box had this item boucing around inside. The lid was colapsed and the sides were skewed. I could reach in and touch the jack. The packing was not enough to protect the item. There was no damage but it had poked a couple of holes in the box from sliding around. I would think that if your business is mostly trailers you'd know how to pack an item!
by:
Deretha
01/04/2020
After receiving the jacks , we are glad to say they met our expectations and more. For the price the quality is sturdy and well made. We would recommend this product.
by:
R.ROBINSON
08/04/2017
EAYS ORDERING WEB SITE, SHIPPED ON TIME AT A GOOD RATE. ALSO HAD EXCELLENT PACKAGING.
by:
Joel
08/18/2024
Fit nicely
by:
Dean
10/23/2020
Everything was perfect. Easy to order, boxed and shipped asap. Arrived a few days later!
I will definitely return for any of my needs
I will definitely return for any of my needs
by:
Paul
10/21/2020
A OK
25
800
true
Show More Reviews
See what our Experts say about this etrailer Trailer Jack
- Will the # TJB-2001S-B Trailer Jacks Support My Boat’s Gunnel Supports While Traveling?Hello again Kelly, Thanks for writing in! The # TJB-2001S-B is definitely strong enough from a capacity standpoint. Each jack has a 2,000 lb lift capacity and a 3,000 lb support capacity, so supporting approximately 300 lbs per jack is well within its rating. It also has a deep-seated snap ring that provides additional side-load support. Where I would be hesitant is leaving the jacks extended and loaded while trailering. I do not have a verified rating from RAM for using these as continuously...
view full answer... - Recommended Trailer Jack With 1,500 lb Capacity and Retracted Height of 12-3/4 InchesThe Fulton Snap-Ring Swivel Marine Jack with Fixed Length - 400 lbs # F1410050149 has a fixed height of 14-1/2 inches. We don't have a fixed height option for a 1,500 lb jack, so I recommend the Fulton Bolt-Thru Swivel Marine Jack - Bolt On # FXP15L which is shorter at the retracted height of 12-3/4 inches but also extends to 24-3/4 inches. I've attached a couple videos to assist.
view full answer...
- Availability of Swivel Trailer Jack with Foot Plate Hey Mark, we have the etrailer jack part # TJB-2001S-B which is very similar to the Fulton jack you mentioned but it has a flat foot plate instead of a wheel caster, would this work for you?
view full answer... - Replacement Trailer Jack for etrailer Swivel Jack that Has Wheel CasterHey Louis, the Fulton jack part # FTJ120W0301 has a wheel caster and uses the same size/style snap ring attachment so it would be what you'd want.
view full answer... - Can New Trailer Jack Be Installed On Trailer Using Same Mounting Hardware And Snap RingThe snap ring, part # SNP-RING that holds the etrailer sidewind jack, part # TJB-2002S-B measures 2-inches diameter. If that is the diameter of the snap ring you need for your trailer jack it may work but there is no guarantee since it is designed for # TJB-2001S-B, # TJB-2001-Z, # TJB-2002-S, and # TJB-2002S-B jacks only.
view full answer... - Thickness of Snap Ring for etrailer and Ram JacksThe Replacement Retaining Ring # SNP-RING measures 0.08 inches, but keep in mind there will be some slight variances on a per-ring basis. This is a replacement for specific jacks, which are the following Ram/etrailer jacks: TJB-2002-S, # TJB-2002S-B, # TJB-2001S-B, # TJB-2001-Z.
view full answer... - Installing a Swivel Jack on the Frame of a Cargo TrailerThe etrailer Round Snap Ring Swivel Jack w/ Footplate # TJB-2001S-B is a swivel jack that is designed to be welded on to the frame of a trailer. If you are looking to use hardware to install a jack rather than welding the jack to the frame, I recommend the Pro Series Round Swivel Jack # PS1400300303. The Pro Series jack is a bolt-on swivel jack that includes the hardware needed to mount to your trailer frame. This jack will fit frames up to 3 x 4 inches. The jack is similar in cost and...
view full answer... - Mounting Bracket for Ram/etrailer Snap Ring Swivel JackIn regards to the snap ring mount Ram or etrailer swivel jacks like the Round Snap Ring Swivel Jack w/ Footplate part # TJB-2001S-B, the Replacement Mounting Bracket for etrailer and Ram Snap Ring Swivel Jacks part # TJB-MB which comes with the jack is what gets welded to the frame and then the jack is attached to this bracket via a snap ring part # SNP-RING. There are no other mounting brackets or parts involved in the installation of the jack.
view full answer... - Could Trailer Jack # TJB-2001SB Fit Same 2.5 inch Pipe Mount as Bulldog JackThe snap ring mount that the # TJB-2001S-B fits is the same 2-1/2 inch diameter as what your trailer has now so it will fit the same mount and work well.
view full answer... - Replacement Trailer Tongue Jack For Ram Swivel Jack With 10" Of Lift and 2,000LB Lift CapacityThe Round Snap Ring Swivel Jack # TJB-2001S-B is the closest jack we have to the measurements you listed. This jack is 10" from the bottom of the foot to center of the mounting bracket when retracted and 20-1/2" when extended.
view full answer... - Distance from Center of Jack Mounting Ring to Top of Round Snap Ring Swivel Jack w/ FootplateThe distance from the jack's mounting plate center to the top of the jack measures 6-1/2 inches. Pins are not available as replacement part.
view full answer...
- Could Swivel Jack Attach to Sides of Trailer to Help with Changing FlatsPutting swivel jacks on the side of your trailer like the part # TJB-2001S-B that you referenced would be an easy way to jack the trailer up in the event you need to change a flat. I'd recommend mounting the jack at a height that's high enough it could swivel into position with the trailer basically on the rim instead of the tire since there's chance it will be flat.
view full answer... - Comparing Pro Series and etrailer 2,000 lb Sidewind Trailer JacksThe Pro Series trailer jack # PS1401020303 and the etrailer jack # TJB-2001S-B are both very similar designs made by two different companies. The only noteworthy difference is the etrailer has a slightly better 1-year warranty as compared to the a 1-year limited warranty of the Pro Series so that would be what I would go with.
view full answer... - Can Round Snap Ring Swivel Jack Be Rotated 180 DegreesYes, the Round Snap Ring Swivel Jack # TJB-2001S-B can be swiveled and stored upside down. The only thing holding it in place is the pin so when you pull the pin it can rotate a full 360 degrees.
view full answer... - Is the Bare Metal Bracket On the Round Snap Ring Swivel Jack w/ Footplate Removable Yes, the bare metal mounting bracket which gets welded to the frame that comes with the Round Snap Ring Swivel Jack w/ Footplate part # TJB-2001S-B is removable. In order to do this, there will be a snap ring that you must remove. If you have a pair of snap ring pliers that will be best but I have gotten them off with needle nose pliers before as well. The snap ring is hard to see as it's on the inside of the bracket but it does exist. Therefore, you can have the bracket powdered coated...
view full answer... - Can the Handle Be Replaced On the Round Snap Ring Swivel Jack TJB-2001S-BThe handle on the Round Snap Ring Swivel Jack part # TJB-2001S-B is not replaceable but since the jack is cost effective and can be removed and reinstalled with the snap ring it should not be too much of an issue to just replace the entire jack which would be the only option anyhow if the handle was broken. I really can't even think of a jack off-hand that the handle is replaceable on.
view full answer...
Do you have a question about this Trailer Jack?
Info for this part was:
Expert Research:
Jameson C
Installed by:
Cole B
Updated by:
Wilson B
Updated by:
Ronnie R
Updated by:
Mike S
Updated by:
Alex H
Written by:
Amanda M
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.