1. Custom Fit Vehicle Wiring
  2. Tekonsha
  3. Custom Fit
  4. Trailer Hitch Wiring
  5. 4 Flat
  6. Powered Converter
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

Item # 118422
lowest price pledge
Retail:$67.61
Our Price: $52.67
You Save: 22%
Custom Fit Vehicle Wiring

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

Orders above $99 qualify for Free Shipping
Shipping Weight: 1.74 lbs
Quantity: 
In Stock
118422 - 4 Flat Tekonsha Trailer Hitch Wiring
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Quickly and easily install a 4-way trailer connector on your vehicle with this custom wiring harness. T-One connector plugs directly into existing wiring. Powered ModuLite reduces strain on wiring system. Call 800-298-8924 to order Tekonsha custom fit vehicle wiring part number 118422 or order online at etrailer.com. Free expert support on all Tekonsha products. Guaranteed Lowest Price and Fastest Shipping for T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector. Custom Fit Vehicle Wiring reviews from real customers.
  • All Info
  • Reviews (68)
  • Q & A (30)
  • Photos
  • Why etrailer?

Tekonsha Custom Fit Vehicle Wiring - 118422

  • Custom Fit
  • Trailer Hitch Wiring
  • Tekonsha
  • 4 Flat
  • Powered Converter

Quickly and easily install a 4-way trailer connector on your vehicle with this custom wiring harness. T-One connector plugs directly into existing wiring. Powered ModuLite reduces strain on wiring system.


Features:

  • Provides a 4-way flat trailer connector at the back of your vehicle to power your trailer's signal lights
    • Compatible with 5-pole, 6-pole and 7-pole adapters (sold separately)
  • Connects quickly and easily
    • Locate connection points in trunk
    • Plug in T-connector
    • Run hot lead to car battery
  • Includes ModuLite power module that connects directly to battery to avoid overloading vehicle's electrical system
  • Constructed of 16-gauge bonded wire
  • Comes with dust cap for 4-way flat connector


Specs:

  • Maximum amperage:
    • Stop/turn lights: 2.1 amps per circuit
    • Tail lights: 4.2 amps per circuit
  • 1-Year limited warranty


Installation

This custom-fit T-One connector plugs into your vehicle's wiring harness, which is located inside your trunk, behind the tail lights on both the driver's side and passenger's side. You will need to remove some interior trim or carpeting to access this harness. Once you've plugged in the T-connector, run the hot lead up to your car battery. Connect the lead to the included fuse holder, and then connect the fuse holder to the positive terminal on your battery and insert the provided fuse.


Once installation is complete, the 4-way flat connector will be stowed within your trunk.


It is recommended that you use a small amount of grease on all electrical connections - the plugs on your automobile and the 4-pole connector itself - to help prevent corrosion.


ModuLite Power Module

A ModuLite power module is built into this T-One connector. With a ModuLite, your trailer's lights will be powered without overloading your vehicle's electrical system. Because the module draws power directly from your car's battery and bypasses the electrical routes that are used by a basic wiring harness, there is virtually no draw on your tail light circuits.



118422 Tow Ready T-1 T-Connector - 4 Wire - Modu-Lite

Installation Details 118422 Installation instructions

This Product Fits The Following Vehicles



California residents: click here



Customer Reviews

T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector - 118422

Average Customer Rating:  4.9 out of 5 stars   (68 Customer Reviews)

Quickly and easily install a 4-way trailer connector on your vehicle with this custom wiring harness. T-One connector plugs directly into existing wiring. Powered ModuLite reduces strain on wiring system.

- 118422
by:

very good product easy to install no pr oblems 845256



- 118422
by:
2009 Ford Fusion

Simple wiring and very straight forward installation video makes for an easy installation. Fits and programs perfectly for a 2009 Ford Fusion SEL with the 3.0 Only complaint is that I think there are to few zip ties as I needed to use my own. 807238



- 118422
by:

Shipping was fast, everything fit excellent,very well thought out. I’m extremely happy with this purchase ( trailer hitch and wiring harness) would definitely buy from etrailer. com again. 784435



- 118422
by:

Top quality and excellent videos. 745258



- 118422
by:

Great price and worked well 717506



- 118422
by:

All was as advertised. Great quality and very good instuctions. 688265



- 118422
by:

Awesome product very easy install works out great 668589



- 118422
by:
2007 Ford Fusion

Ordered both a hitch and wiring harness, to haul my kayak trailer. Perfect fit, and fairly easy to install the hitch. Even simpler to install the wiring. Love this site. I'll be back for any other items I may need. Thanks!! 662682



- 118422
by:
2007 Ford Fusion

This is my second order from etrailer. LOVE this website!!! So easy to find what you want, and order. Very prompt delivery! I look forward to installing my wiring harness, so I can haul my kayak trailer. Thanks for making it a breeze! 662681



- 118422
by:
2012 Ford Fusion

easy to install thanks for the help 633124



- 118422
by:

The wiring instructions were easy to follow and it works great. Even a year later, this system is holding up and works great 617377



- 118422
by:

bought the set of 6 locks for our trail ers 614158



- 118422
by:

shortly after ordering my wire harness I developed health issues and it is still in the box laying on the new hitch in the garage I will update if and when I get them installed 610791



- 118422
by:
2011 Ford Fusion

Harness came as described and was easily installed as per instructions. Works well. 514258



- 118422
by:
2010 Ford Fusion

This kit works excellent, used it with 18140 short bracket and 18144 four-pole mounting bracket. All in all, a professional looking install. Very happy 477095


Comments
this kit makes for a professional wiring install. Was able to run power wire completely through interior of vehicle, there is a plastic plug located in the firewall, above the gas pedal, which allowed access to the engine compartment for power hookup. Very nice.
Mark - 03/02/2019

50054

- 118422
by:

Still working great, love it. 473651



- 118422
by:

Everything worked just like they said it would. Very excited. 472831



- 118422
by:
2008 Ford Fusion

Ordered the trailer wiring kit for a Ford Fusion. The T-one harness. As usual, fast delivery of product and it arrived with all the accessories as described. Good quality wiring and a nearly effortless installation. Worked first time I turned the lights on. Cudos again goes to etrailer for a great product at a great price and George J's immediate email to follow up on one of his products. Great customer service and it just goes to show that they care about their customers and want to see them succeed. 419076



- 118422
by:
2012 Ford Fusion

I received all the parts promptly. Packaging was very sturdy and no shortages. I installed the hitch in 20 minutes! The wiring took a bit longer just because I had to work under the car, no lift in my driveway. The install worked exactly as your video showed. Thank you to etrailer for the prompted service and very detailed video instructions. I will be back to etrailer for certain! 401476


Comments
The hitch has been in use for a year now and still no issues. I periodically check the wiring visually and with a meter. All works fine. Bolts are still tight.
Mark S - 07/04/2018

40488

- 118422
by:
2012 Ford Fusion

I am happy with the harness & use it of ten. 391599



- 118422
by:
2011 Ford Fusion

Just as advertised, easy to install, hardest part was determining where to run the wire to the battery. 390943



- 118422
by:
2008 Ford Fusion

Product came fast. Very reasonabley priced. I am happy with my purchase 389027



- 118422
by:

I installed 2 of these years ago. I was a lot younger 88 now. I did do the wiring harness not so much weight there. I decided to let someone else do the hitch for me. The instructions & videos are great ! There is my oil change man, I'll ask him. I owe him, he rotated my tires for free. You fellows keep doing the excellent work you are doing now, wish I could say more. I would recommend you & your product to everyone. 388708



- 118422
by:
2007 Ford Fusion

Excellent item. Worked on the first plu g. 379202



- 118422
by:

Very pleased with delivery on my order. It was placed on a Wednesday late afternoon and I received them by Monday morning. This weekend I will be placing them on the vehicle I will also send another review and photos after I have completed. Awesome job so far etrailer thank you 356634


25
68
Show More Reviews

Ask the Experts about this Tekonsha Custom Fit Vehicle Wiring

  • Installation of T-One Wiring Harness Splicing Into Aux 12V Connector at Center Console
    The T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118422 is recommended to be installed to draw power directly from the battery. Splicing into your 12V Aux will work as long as you have the fuse rating properly accounted for as you referenced and as long as you isolate the 12V Aux so when you use it to charge your phone, etc, doesn't steal power from the trailer connector. We don't recommend installing in this way. You need the 12V power to be correct so you don't...
    view full answer...
  • Trailer Wiring and Hitch Recommendation for 2010 Ford Fusion
    For trailer wiring for your 2010 Ford Fusion the T-One kit part # 118422 would be the best option. This brand of trailer wiring is the most reliable that we offer so we recommend it highly. It would work great with the Draw Tite hitch part # 24865 which is also a fit for your 2010 Ford Fusion. The 4-way stores in the trunk area of your vehicle when not in use so you wouldn't need to come up with a way to secure it to the hitch tube or bumper area. Having the 4-way run out of the...
    view full answer...
  • Necessity of Routing Power Wire for T-One Wiring Harness # 118422 When Installed on 2010 Ford Fusion
    Although the T-One Vehicle Wiring Harness you mention obtains its signals from plugging inline with the existing tail light wiring harnesses, the voltage to power the trailer lights needs to be drawn directly from the battery. The reason for this is twofold. First, the vehicle manufacturer has determined that any voltage drawn through the vehicle wiring over and above that needed to operate the vehicle tail light assemblies could overload the vehicle wiring system and damage it. Secondly,...
    view full answer...
  • Will a Trailer Wiring Harness from a 2011 Ford Fusion Fit a 2014 Ford Fusion
    Trailer wiring harness # 118422 will only fit a 2006 to 2012 Ford Fusion but not the 2014. For the 2014 Ford Fusion you will need trailer wiring harness # 118574. I have included a link to the installation instructions for you.
    view full answer...
  • Will Trailer Wiring Harness # 118422 Fit a 2011 Ford Fusion Hybrid
    According to Tow Ready, the T-One Vehicle Wiring Harness with 4 Pole Trailer Connector, # 118422, will fit all style of the 2011 Ford Fusion, including the hybrid model. I have included a link to the installation details for you to view and a link to a video showing a typical installation.
    view full answer...
  • Routing the Power Wire for a Trailer Wiring Harness for a 2014 Ford Fusion
    You seem to have found the silver lining in that your 2014 Ford Fusion is well built! Look for a factory harness that goes from the cab of the vehicle through the firewall. You may have to look in some tight places. If you cannot locate a harness, or it is not within easy reach or the wire just will not fit, you will have to drill a little hole and route the wire through it. Of course you will need to be careful where you drill so as not to damage anything on the opposite side of the...
    view full answer...
  • Replacement Box Recommendation for Tow Ready Trailer Wiring 118422
    I checked your order notes and you ordered the part # 118422. The converter box changed over the years and that is why it looks different now. You could use the # 119190 as a replacement that would just require you to match the wires on the input side of the box by color to the wires you have ran to your shorted out box.
    view full answer...
  • Parts Needed to Tow a Trailer with the 2011 Ford Fusion
    You can pull a trailer with any class of trailer hitch, you just need to be under the weight capacity of either the hitch or vehicle, whichever is lower. Therefore, for your 2011 Ford Fusion I recommend the Draw-Tite Sportframe Trailer Hitch Receiver part # 24865 which has a 200 lb tongue weight and 2,000 lb gross trailer weight rating. Please keep in mind that the owner's manual does not recommend towing a trailer with the vehicle so they do not list any towing capacity. In addition...
    view full answer...
  • Trailer Hitch and Wiring Recommendation for a 2011 Ford Fiesta
    That depends on which model of Ford Fiesta you have. If you have a sedan you would want the part # 24856 and if you have a hatchback you would want the part # 24961. For trailer wiring you would want part # 118471 for if you have a hatchback and part # 118422 for if you have a sedan. For a ball mount you would want the part # 3593 that you referenced. For a 2 inch ball you would want part # 19258 or # 19256 for a 1-7/8 inch ball.
    view full answer...
  • Trailer Hitch that Fits 2009 Ford Fusion
    We have the Draw Tite trailer hitch # 24775 for the 2009 Ford Fusion that has a towing capacity of 2,000 lbs. This capacity though is independent of the capacity of your vehicle. I tried looking up the capacity for it online and most places say it wasn't listed or it's not rated for any towing. So I really wouldn't feel comfortable telling you that your vehicle could tow a 1,500 lb trailer. Especialy on the hills you describe. If you really wanted to do it though I would recommend checking...
    view full answer...
  • Comparing CURT Trailer Hitch and Draw-Tite Trailer Hitch for a 2011 Ford Fusion
    A 7/16 inch bolt and a 1/2 inch bolt will both have a much higher capacity than the hitch or vehicle frame rails. Since both installation instructions for CURT, # 11390, and Draw-Tite, # 24865, require fishwiring hardware through the frame rails, the slightly smaller Draw-Tite 7/16 inch bolts will be easier to fishwire into place. The other major difference is the CURT hitch does require the use of a stabilization strap, # 18050, for any non-trailer load such as a bike rack or cargo...
    view full answer...
  • Recommended Trailer Hitch Receiver And Towing Accessories For 2012 Ford Fusion SE
    Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" # 24865. This hitch is 5-1/2 inches from the outermost part of the bumper to the center of the itch pin hole. The Curt Hitch # C11390 has a measurement from the outermost bumper of 5 inches to the center of the hitch pin hole. For your ball mount, I recommend the Curt Class II Drawbar - 2-5/8" Rise, 3-1/4" Drop - 7-1/4" Long - 3,500 lbs # C45521 along with a 1-7/8 inch hitch ball like # A-80 or a 2 inch ball...
    view full answer...
  • Trailer Hitch Recommendation for a 2011 Ford Fusion
    The hitches available for you 2011 Ford Fusion are Class I hitches like the part # 24865 which has a 200 lb tongue weight capacity. This means that you could carry up to 200 lbs of weight from a wheel chair carrier and wheel chair. Most likely this will not be enough capacity so the only option you would have for this so you would need a small trailer for transporting the lift. A small trailer would be the best route. For trailer wiring you would need the part # 118422, # 3594...
    view full answer...
  • Can the Foot-Activated Liftgate Still Work with Trailer Hitch Installed on a 2015 Ford Edge
    I recommend going with the Draw-Tite Trailer Hitch # 75234 for your 2015 Ford Edge. This is a Class III trailer hitch with a 2" receiver that will not prohibit the use of your foot-activated tailgate although you may have to kick straight out in a different spot than you do now (see attached picture). If you let me know what you will be using this hitch for I can make additional recommendations if necessary. As far as towing with your 2008 Ford Fusion is concerned, I took a look at the...
    view full answer...
  • Trailer Hitch and Ball Mount Recommendations for a 2010 Ford Fusion
    Rise or drop is not measured to the top of the ball but instead to the top of the platform on the ball mount that holds the ball. So that is going to change things a little. I have included a link to a help article that explains how to measure for rise/drop to tow a trailer level. For a hitch I recommend going with Curt hitch # C11390 for your 2010 Ford Fusion. You mentioned that some Class I hitches have a tab in them meaning some Class II accessories will not fit. This hitch does not...
    view full answer...
  • Hitch Recommendation for a 2011 4-cyl Ford Fusion
    The Draw Tite Hitch part # 24865 has the towing capacities of 200 lbs tongue weight and 2,000 lbs total trailer weight. Whether or not your 4-cylinder 2011 Ford Fusion has the same capacities is why you need to consult the owners manual of your vehicle. Whichever component in your towing setup has the lowest towing capacity is what dictates the towing capacity. I attached an install video for this hitch for you to check out as well. For trailer wiring you would want the part # 118422. For...
    view full answer...
  • Trailer Hitch Recommendation for a 2010 Ford Fusion Sport with Dual Exhaust
    Yes, the Draw-Tite Trailer Hitch, # 24865, will fit on all models of the 2010 Ford Fusion including the sport with dual exhaust. This hitch installs exactly the same as Hidden Hitch Trailer Hitch, 60282, which has been discontinued, and we have pictures and a video of it installed on a 2010 Fusion with dual exhaust. I have provided a link to the video for reference. The recommended ball mount but for the Draw-Tite Hitch is # 3594. For a ball you can use # 19256 (1-7/8 inch diameter)...
    view full answer...
  • Trailer Hitch Recommendation for 2010 Ford Fusion for Towing Small Trailer
    The Draw Tite hitch part # 24865 is a confirmed fit for your 2010 Ford Fusion and has a 2,000 lb total trailer weight capacity. This would be more than enough for a 390 lb trailer. Unless there are restrictions in the owners manual of your vehicle on towing this hitch would be a great solution. I attached an install video for you to check out as well. The recommended ball mount but for the Draw-Tite Hitch is # 3594. For a ball you can use # 19256 (1-7/8 inch diameter) or # 19258...
    view full answer...
  • Trailer Running Lights Not Working On a Trailer Towed by a 2011 Ford Fiesta
    It sounds like the running lights are not working on the trailers. Since they are working fine with the other vehicle, this indicates a problem with the other vehicle and/or its wiring harness. You can test the wiring harness to see if it is faulty using a circuit tester like # 40376 if needed. Also, make sure that you are using the correct wiring harness. The hatchback models can use the 56064 but if you have a sedan, you would need a different harness like # 118422 or # C56114. If...
    view full answer...
  • Can a 2010 Ford Fusion Hybrid Tow a Trailer
    Can you tell me the model year of your Fusion? We do have some hitches that fit the Hybrid models but I need the year to confirm a fit and verify any towing restrictions. Also, any idea of the weight you need to tow?
    view full answer...
  • What Trailer Hitch Fits a 2012 Ford Fiesta 4-Door Sedan
    I do have a hitch for you that will fit the 2012 Ford Fiesta Sedan. It is the Draw-Tite Trailer Hitch # 24856. I have included a link to the installation instructions for you. If you plan on doing some towing, the correct ball mount is # 3593, and you can use pin and clip # PC2. For a ball, use # 19256 (1-7/8 inch diameter) or # 19258 (2 inch diameter). For trailer wiring, use the T-One Vehicle Wiring Harness, # 118422. I have included a link to the installation details and a link to...
    view full answer...
  • Recommended Hitch for 2012 Ford Fusion SEL
    I have a solution for you, but the Curt # C13902 is not compatible with your 2012 Ford Fusion SEL. Instead, I recommend using the Curt # C11390 which is a confirmed fit on your 2012 Fusion SEL. This hitch has a concealed cross-tube design that will allow you to maintain the factory look on your vehicle and it has a 1-1/4" Class I receiver. If you're going to be using this hitch for towing a small, light weight trailer, you'll also need a wiring harness, ball mount and hitch ball. For...
    view full answer...
  • Can 2010 Ford Fusion Hybrid Tow Trailer and Parts Needed to Do So
    We do have all the parts needed for your 2010 Ford Fusion Hybrid to physically pull a trailer but you will want to take a look at your copy of the owner's manual for its specific capacity or restrictions. I did take a look at the online version of the manual and found that Ford does not recommend towing a trailer with this vehicle so there aren't any capacities listed. I do still recommend verifying this in your copy of the manual as its possible you have a different model. If you...
    view full answer...
  • Trailer Hitch and Wiring for a 2006 Ford Fusion
    That was a nice gift but Hidden hitch trailer hitch 60282 will not fit a 2006 Ford Fusion. It used to fit 2010 to 2012 Fusions, 2010 and 2011 Mercury Milans, and 2010 to 2012 Lincoln MKZs. But that hitch is now discontinued. The comparable trailer hitch for the 2006 Ford Fusion is # 24775. I have linked a video showing how it installs. If you plan on doing some towing the correct ball mount is # 3592. For a 1-7/8 inch ball use # 19256 and for a 2 inch ball use # 19258. For trailer wiring...
    view full answer...
  • Can a 2008 Ford Fusion Accept a Class II Hitch to Allow Use of Wheelchair Carrier
    All of the trailer hitches offered for your 2008 Ford Fusion (a great car - I used to own one until an East Coast blizzard took her away from me) are light-duty Class I types with a 200-lb tongue weight capacity. These do not have the capacity to transport a wheelchair and carrier and no Class II hitches are available for the vehicle. Your option then is to use a small trailer (which will work with one of these Class I hitches). Local outdoor and farm stores often carry small utility...
    view full answer...
  • Complete Towing Package for a 2011 Ford Fusion Hybrid
    Yes, the Draw-Tite Sportframe Trailer Hitch, # 24865, and the Tow Ready, the T-One Vehicle Wiring Harness, # 118422, will fit all styles of the 2011 Ford Fusion, including the hybrid model. We have a video of this hitch being installed on a 2011 For Fusion Hybrid and a video of the wiring harness being installed on a 2010 Fusion which should be very similar to your 2011 model. The ball mount is separate, you will need the Draw-Tite Ball Mount, # 3594, which includes a pin and clip. A...
    view full answer...
  • Will the Draw-Tite Class II Trailer Hitch # 36241 Fit a 2012 Ford Fusion
    I have a hitch solution for your vehicle, but the Draw-Tite Class II Trailer Hitch, # 36241, will not fit your 2012 Ford Fusion. Instead, you will want to get the Draw-Tite Sportframe Class I Trailer Hitch, # 24865. We have installed this trailer hitch on a 2012 Ford Fusion so I linked the video and installation instructions for you to check out. If you are looking to do some light towing with your vehicle, then you will also want the T-One Wiring Harness, # 118422, ball mount, # 3594,...
    view full answer...
  • Which Trailer Hitches and Wiring Will Fit on a 2009 Ford Fusion
    We do have several hitches available for your 2009 Ford Fusion, but # 60254 is not one of them and has been discontinued. The comparable hitch to the one you referenced is the Draw-Tite Trailer Hitch, # 24775. You might also be interested in adding the T-One Vehicle Wiring Harness with 4 Pole Trailer Connector, # 118422. This is a T-one style harness that plugs in line with your vehicles taillights and provides a 4-Way connector at the rear of the vehicle. The powered converter requires...
    view full answer...
  • Compatibility of Draw-Tite # 24865 Class I Trailer Hitch With 2012 Ford Fusion Hybrid
    My Draw-Tite representative confirms that the # 24865 Class I hitch you referenced is compatible with your vehicle. The fact that your Fusion is the Hybrid model will not affect the installation. The battery will not interfere with the installation. If you're planning on doing some light duty towing, and your owner's manual doesn't prohibit towing, the Draw-Tite # 24865 would be a good choice. You will need the recommended ball mount. You'd also need to add a trailer wiring harness,...
    view full answer...
  • Hitch Comparison and Recommendation for a 2008 Ford Fusion
    The only real difference between the Draw Tite hitch part # 24775 and the Hidden Hitch part # 60846 (no longer available) is that the Hidden Hitch comes with a ball mount and a pin and clip. These hitches are made by the same parent company and are identical. In case you don't have a ball mount yet you would also want the part # 3592, and then for a 2 inch ball # 19258 and for a 1-7/8 inch ball # 19256. For trailer wiring you would want the part # 118422.
    view full answer...

Do you have a question about this Custom Fit Vehicle Wiring?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality custom fit vehicle wiring for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate custom fit vehicle wiring information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Test Fit:
Joe V
Test Fit:
Nicholas E
Test Fit:
Alan C
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Video Edited:
Zack K
Video Edited:
Andrew K
Video Edited:
Joshua S
Video Edited:
Chris R
Installed by:
Jeff D
Updated by:
Laura H
Updated by:
Sarah W
Updated by:
Alexander C
Updated by:
Isabelle B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.