See what our Experts say about this Pollak Custom Fit Vehicle Wiring

• How to Make 7-Way Adapter for Scooter Lift to Plug Into 7-Way on Honda Ridgeline
  The adapter part # PK12716 that you referenced only carries turn signal circuits so while I have a solution that would work, this would not be it. Instead you would want to wire the scooter lift power wires to a 7-way like part # PK12706. The ground circuit will be the pin in the 5:00 position and the 12 volt power would be in the 11:00 position.
  view full answer...
  
• Troubleshooting LED Light Bar Not Working for 2022 Chevy Silverado 3500
  The newer GM trucks have a PWM system that makes it difficult to use other products like LED light bars. For your application I recommend using the Furrion 7-Way Adapter # FR87PR along with the Pollak Adapter # PK12716 to match with your light strip bar.
  view full answer...
• What is Simplest Magnetic Tow Bar Lighting Solution for Tow Vehicle that has 7-Way
  Hey David, to make your life as easy as possible I would go with a magnetic lighting kit like the part # PE26UR which has a 4-way flat connector which will allow you to use an adapter like the part # PK12716 and not have to do any wiring or splicing. To use the part # 337TL257M you'd need to cut off the 4-way round and wire in the part # PK12706 instead.
  view full answer...
• 7-Way to 4-Way Adapter for 2024 Hyundai Palisade
  Any 7-way to 4-way adapter will work with the 7-way on your Palisade. The # PK12716 you were looking at is usually what I recommend since it has a low cost and small size to store in the vehicle. If you want one that also acts as an extension you can use the # HM47065.
  view full answer...
• Can Lights of Thule Epos Bike Rack Work with 7-Way Trailer Wiring on Vehicle
  Hey Dave, it sounds like you have a 7-way trailer wiring connector which would just require the adapter part # PK12716 to connect to the lighting of the Thule Epos bike rack part # TH49XE.
  view full answer...
• Wire Color Identification of Tow Bar 4-Way Wiring for Splicing in Additional Lighting
  The green wire of the 4-way connector you sent in a picture of is the right turn/stop circuit, the yellow is left turn/stop, brown is running light, and white is ground. You could use the # 18252 to easily splice into the circuits as well to make an additional connector.
  view full answer...
  
• Options For Replacing A Broken 7-Way Connector
  Hello Evan. I do have a solution for you, but I am afraid we do not offer a product that will fit your exact description. We do offer a few 7-way extensions that could potentially be used. Something like the TorkLift Wiring Harness Extension # TLW6021. This will plug into the old 7-way and give you a new 7-way plug. It is 21" long though, so you would have to come up with a way to hide all the extra cord. You can use that with a bracket # A10-9394VP for a clean installation. Keep in mind...
  view full answer...
• Flat Tow Wiring Recommendation for Dolly Towing a 2018 Cadillac XT5
  Hey Mike, thanks for reaching out! I have 2 different options for you to look at, and it really just depends on what style you're looking for: The Heavy Duty Magnetic Tow Lights # TL21RK are wired and will work with your 7-Way if you use the Pollak Adapter # PK12716. For a wireless option we have the Custer Wireless LED Tow Bar Light # LIW-LDTL-7B which plugs in without the adapter and obviously doesn't require you to run wiring along your vehicle and make sure it isn't blowing around...
  view full answer...
• Adapter For 6-Pin Round Socket On Vehicle And Trailer With 4-Flat
  Hello Willy, thanks for reaching out. If what you have on your truck is a 6-pin round plug like part # # PK12720 (pictured below), you can use the adapter part # PK12717. This will plug in the 6-pin round plug and allow you to hook up the 4-flat plug on your trailer. If the plug on your truck is actually a standard 7-way (also pictured below), what you will need is the adapter # PK12716. Leave a reply below with any other questions or comments and I am happy to get back to you.
  view full answer...
• What Stealth Hitch Fits The 2025 Volvo V60 Wagon Plug-In Hybrid
  Hello John, thanks for reaching out. Sounds like you are on the right track. The Stealth Hitch # SH47FRT is the correct fit for your 2025 Volvo V60 wagon plug-in hybrid. This hitch comes with the rack receiver, ball mount and towing kit. Everything you need to tow a trailer with your Volvo. The wiring kit comes with a 7-way plug, so if you need to hook up a 4-flat just use the adapter part # PK12716. Check out the install video I linked for you below. Feel free to reach out with any...
  view full answer...
• Recommended 4-Way Connector for a 2018 or 2020 Ford F-150 to Power a LED Light Bar
  Hey Keith! Not sure if you have a 2018 or a 2020 F-150 but I know you don't have a 2028. If you do not have a trailer connector on your truck you'll need to install the Curt 4-Way Flat Trailer Connector w/ 60" Harness item # C58044. There are no custom fit harnesses if your truck didn't come with some form of a trailer connector from the factory. If your truck does have a 7-way connector, you'll be able to use the Pollak 7 Pole to 4 Way Connector Adapter item # PK12716 to power your LED...
  view full answer...
• Availability of 7 Blade to 4 Pin Round Trailer Plug Adapter
  There is an adapter that will work for you, the Hopkins Endurance Flex-Coil Trailer Connector Adapter # HM47043. This will convert your 7-pole, blade-style vehicle-end connector for use with a 4-wire round connector. I've added a link to a video review of this product for you to take a look at.
  view full answer...
• Recommended 7 Way To 4 Flat Adapter For A Tesla Model Y With Factory Tow Package
  It sounds like you are already on the right track. You can indeed use an adapter like the Pollak # PK12716 for this purpose. This will plug in to the 7 way plug on your Tesla Model Y, and give you a 4 flat connector on the other end, which you can plug your bike rack into. We made a brief install/review video which I have linked below.
  view full answer...
• Adapter to Use Bike Rack 4-Way With 7-Way on Vehicle
  Hi Suzan; if you're saying you want to be able to use your 7-way on the vehicle to power the 4-way on your bike rack you can use a simple adapter like the Pollak 7 Pole to 4 Way Connector Adapter # PK12716. If you are trying to use your 7-way for a trailer and also have power for the bike rack 4-way at the same time that is a bit more complicated. If you can provide me with the year, make, and model of your vehicle I can see what is available to accomplish this if that's what you're looking...
  view full answer...
• Adapter 7 Pole to 4 Pole for Use with the Ford Lighted Hitch Cover
  In order to use this lighted Ford hitch cover, you will need an adapter, product # PK12716, that will adapt your 7 Pole to a 4 Pole. This will allow you to plug the hitch cover into the 4 Pole adapter and be on your way!
  view full answer...
• Which Stealth Hitch Option for Towing Small Boat With 2021 Hyundai Palisade
  The # 391CONVPT5L Stealth Hitch you'd looked at doesn't include the receiver that's designed for towing, it's meant for hitch mounted accessories only, but there are options that would allow you to tow your boat. To tow your boat, there's a couple ways you can go to upgrade to make that possible. You could use the part # 391CONVPT5L hitch, add the # 391BMU5L ball mount and a # 63845 2-inch trailer ball and the # CU94FR 4-pole trailer wiring harness, which would provide you everything you...
  view full answer...
  
• How to Power the Thule License Plate Holder for Bike Racks w/ a 7-Way Connector
  Hey Joseph! The Thule License Plate Holder for Bike Racks item # TH35JV uses a 4-way connector to power the lights. Since you've got a 7-way there are two options you can use. If you're going to be using your 7-way connector along with your bike rack you'll want the Hopkins Endurance Multi-Tow Trailer Connector Adapter item # HM47570. If you're just plugging in the license plate bracket you can use the Pollak 7 Pole to 4 Way Connector Adapter item # PK12716. Both of these will plug...
  view full answer...
• Recommended Trailer Wiring Harness for a 2024 Tesla Model Y
  It depends on what trailer you'd consider to be "most" trailers, but with a Tesla you're going to be pretty limited so I'll assume it's nothing with brakes. So with that being said, we have the ZCI Circuit Protected Vehicle Wiring Harness w/ 4-Pole Flat Trailer Connector and Installation Kit # 119250KIT, which is a custom fit harness that'll simply plug into your factory wiring. This is a 4 pole wiring harness which is pretty much that standard on every small trailer. It's also worth...
  view full answer...
• Troubleshooting Trailer Tail Lights Not Working On a 2012 Cadillac Escalade
  As your trailer works on other vehicles and your 2012 Cadillac Escalade has the factory tow package I recommend starting by checking the fuses. On your engine compartment fuse box fuse number 1 is for the right trailer brake/turn signal. Fuse number 3 is for the left trailer brake/turn signal. And fuse 25 is for the parking/running lights. If the fuses are all good you will want to test your 7-way with a Test Light # PTW2993 to verify power is getting to the 7-way. I have included a image...
  view full answer...
  
• Recommended 7-Way to 4-Way Adapter
  I would be happy to Phil! The Pollak 7 Pole to 4 Way Connector Adapter item # PK12716 is exactly what you need. You won't have any issues with the adapter causing shorts with your Volvo's electrical system. This adapter just takes the lighting signals from your 7-way and transfers them to your boats 4-way.
  view full answer...
• How to Connect Lights for 2014 Toyota Camry on Tow Dolly
  Hi Dave; since it will be on a tow dolly you need lights like the Heavy Duty Magnetic Tow Lights # TL21RK. If you can find a splitter you can use it as long as the power draw won't overload the circuit with whatever else you're connecting. Otherwise, you will need to run a separate 4-way. If you're using a tow dolly like the Demco Kar Kaddy X # DM9713093 or SS # DM9713045 you don't need additional lights since they come with a full LED DOT lighting package.
  view full answer...
• Best and Easiest to Transfer Trailer Brake Controller for Two Trucks
  The best option - by far - for an easily transferable brake controller that you can use in both your 1999 GMC Suburban and 2009 Chevy Silverado 2500 is the Curt Echo Wireless Trailer Brake Controller # C51180. Just pop it in and out of the 7-way on both vehicles and that's all there really is to it. Just use your smartphone to set it up on both and has a memory so you can save your profiles, meaning you don't have to set it up more than once per vehicle. It truly is the perfect option...
  view full answer...
• Magnetic Towing Lights Needed Compatible with a 7-Way Plug
  Sounds like you were describing the Roadmaster Magnetic Tow Lights # NV-5164. These lights use red lights and are very easy to install. If you are wanting to mount the lights on the sides of your jacks then I recommend using some bungee cords or something like a Support Strap # 18050 to help secure them. Since these are meant to sit on top of vehicles, I am not sure how well they will hold up to any bumps going down the highway when installed sideways. I have attached a review video...
  view full answer...
• 7-Way to 4-Way Adapter on Trailer for 2018 Jeep Grand Cherokee
  Since you said your 2018 Jeep Grand Cherokee already has a 7-way connector, and you are looking to tow a trailer with a 4-way connector, you just need an adapter. For that I recommend the Pollak 7 Pole to 4 Way Connector Adapter # PK12716. All you'll need to do is plug this into your Jeep's 7-way and it will convert one end into a 4-way so you can just plug it right in. I have added a link to a video review for you to check out as well.
  view full answer...