Product Experts Available Now!
Call 1-800-940-8924
THIS ITEM IS NOT A FIT FOR
2014 Keystone Cougar Fifth Wheel
We'll connect you with nearby partnered installers who know this exact setup.
Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
Part Number: C34FR72FT
In Stock
$64.33
Retail:$73.95
You Save: 13%
2014 Keystone Cougar Fifth Wheel
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
We'll connect you with nearby partnered installers who know this exact setup.
- All Info
- Reviews (14)
- Q & A (0)
- Photos
CURT Custom Fit Vehicle Wiring - C34FR72FT
- 4 Flat
- No Tow Package
- Trailer Hitch Wiring
- Vehicle End Connector
- Plug-In
- Plug and Lead
- CURT
- Powered Converter
Easily add a 4-way trailer connector with this custom-fit harness. The T-connector plugs into existing wiring - no cutting needed. Powered converter protects vehicle circuits and ensures consistent trailer lighting for safe towing in any conditions.
Highlights
- Custom-Fit For Easy Installation: Plugs directly into existing vehicle wiring, no cutting needed.
- Powers Essential Trailer Lights: Supports brake lights, turn signals, and running lights.
- Powered Converter For Safety: Uses a direct battery connection to avoid overloading circuits.
- Fully Insulated Wiring: Reduces risk of shorts and interference with other electronics.
- Weather-Resistant Construction: Protective sleeve and sealed connections prevent corrosion.
- Complete Installation Kit Included: Comes with fuses, connectors, and zip ties for a secure fit.
Features to Know About
Straightforward Installation, But Plan for Access
The vehicle's wiring harness is often behind a trim panel or under the cargo floor. Some vehicles may require removing interior panels or lifting carpeted sections to reach it, but once accessed, the harness installs easily with quick-splice connectors.
No Cutting or Splicing Needed: Custom-Fit T-Connector
Plugging in a trailer shouldn't mean tearing into your vehicle's wiring. This custom-fit T-connector snaps directly into your factory wiring harness, so you can get your trailer lights up and running without any cutting or splicing. Just plug it in, and you're ready to tow.
Reliable Trailer Lighting for Every Trip: Powers Brake, Turn, and Running Lights
A well-lit trailer is a safe trailer. This 4-way wiring harness keeps your trailer's brake lights, turn signals, and running lights powered and in sync with your vehicle. Whether you're hauling a boat to the lake or a camper to the mountains, your lights stay bright and visible.
Prevents Overloaded Circuits: Powered Converter for Safe Towing
Some vehicles can't handle the extra electrical load of trailer lights. The built-in powered converter draws power directly from your battery, ensuring a steady, protected current to your trailer while keeping your vehicle's circuits from overloading.
Keep Wires in Check: Fully Insulated and Weather-Resistant
Towing means exposing your wiring to dirt, rain, and road grime. This harness features fully insulated wires and a sealed converter, helping to prevent shorts and corrosion. It's built to withstand the elements so you can tow with confidence in any weather.
Everything You Need for a Clean Install: Complete Kit Included
No extra trips to the hardware store - this kit comes with everything you need. With fuses, zip ties, and connectors included, you can complete the installation without hunting down extra parts.
Specs
Maximum amperage:
- Stop/turn lights: 3 amps per circuit
- Tail lights: 6 amps per circuit
Warranty:
- 1-Year limited warranty
56580 CURT T-Connector - Surface Mount Technology - 4 Wire
Installation Details
This Product Fits The Following Vehicles
- 2026 - 2028 Subaru Forester
- 2026 - 2028 Subaru Outback
Ratings & Reviews
4.9
14 reviews
by:
Jeffrey
10/31/2026
This was a much easier install than all the other wiring harnesses that fit our vehicle. This is the only one I found that came with the matching OEM connector. Just plug it in, ground it with the included self drilling screw, adhere the module in a discrete location, and that’s it.
by:
Perry
10/26/2026
The wiring harness plugged right in to the factory harness. The installation is neat and tidy, and was completed in about 10 minutes.
by:
Warner
11/02/2026
Nick was great.text me often with the delay. Love your products. 4 hitches and wire kits in 12 years.
by:
Mark
10/22/2026
Harness was simple plug and play as advertised. Took 10 minutes to install. Thank you Bre for your help with getting the right harness.
by:
Matthew
11/04/2026
Plug on harness matches up perfectly with vehicle plug. Everything needed for the simple install is included. Etrailer team offer excellent support if needed.
by:
Ray
11/08/2026
Order was great and very easy to install
by:
Verna
10/28/2026
Came a day before it was due. Everything was in the box. Great Company!
by:
Mickey
11/03/2026
It WORKED !!!
by:
William
10/20/2026
by:
Troy
11/09/2026
by:
Daniel
10/26/2026
by:
Dale
10/27/2026
2026
Subaru
Outback
by:
Timothy
10/30/2026
by:
J
10/20/2026
14
14
true
See what our Experts say about this CURT Custom Fit Vehicle Wiring
- Recommended Hitch for a 2026 Subaru OutbackHey Mike congrats on the new car. The Curt Hitch item # C67JR is the only style of hitch currently planned for the redesigned 2026 Subaru Outback. None of our vendors have announced plans for a new hitch that mounts below the 2026 Outback. We'd have them available for preorder if one was in the works. Those style hitches have really gone away the last few years in favor for the more OEM style that hides as much of the hitch as possible. The Curt Hitch item # C67JR is custom fit for your...
view full answer... - Recommended Hitch and Trailer Wiring for a 2026 Subaru Outback I would be happy to Steve and congrats on the new car. To add a hitch to your 2026 Subaru Outback, I recommend our etrailer item # e25TR. Our etrailer Hitch item # e25TR is a custom fit 2" hitch that will bolt to your Outback with included hardware. This hitch has a 3,500 lbs towing capacity and a 350 lbs maximum tongue weight so it'll work great for towing a small trailer or hauling an accessory like a bike rack or cargo carrier. If you also need trailer wiring, I recommend the Curt...
view full answer... - Aftermarket Tow Package for 2026 Subaru Outback WildernessHey Don! The Curt Trailer Hitch Receiver # C67JR is a confirmed fit for all models of the 2026 Subaru Outback, including your Wilderness package. This is a great hitch for hauling a cargo carrier or bikes and also for trailer towing. It's rated at 3,500 lbs of towing weight, but you'll want to refer to your owner's manual on what the Outback is actually rated for. As shown in the photos below, this hitch is a installed behind the bumper and it's a very involved installation, so I highly...
view full answer... - Recommended Hitch for a 2026 Subaru Forester that Does Not Require Bumper Sensors to Be RecalibratedNo, you will not Daniel. So long as you did not damage or misalign the sensor housings when you temporarily remove the rear fascia, they will retain their factory settings after installing the Curt Trailer Hitch item # C47HR. I do recommend not starting your Forester until you've reattached the sensors. You may get an error code that has to be reset if you do. Other than that there will be no issues. The Curt Trailer Hitch item # C47HR is confirmed to fit the 2026 Subaru Forester. This...
view full answer... - Is There a 4-Way Trailer Wiring Harness for a 2026 Subaru Forester?We sure do Jerry! To add a trailer wiring harness to your 2026 Subaru Forester, you'll need the Curt item # C34FR72FT. The Curt item # C34FR72FT wiring harness is custom fit and plugs into a factory port in your Forester's rear cargo area. It'll provide you with a 4-way connector capable of controlling a trailer or accessory's lighting functions. If you need a hitch for your 2026 Subaru Forester, I recommend our etrailer item # e83ZR. This is a custom fit class III hitch with a 2" receiver. Are...
view full answer... - Availability of Plug and Play Wiring Harness for 2026 Subaru OutbackHey Rickey! We have not installed the Curt # C59236 on a 2026 Outback at this time, but we do have a custom wiring harness for your 2026 Subaru Outback. What you need is the Curt T-Connector Vehicle Wiring Harness # C34FR72FT. This will fit your factory wiring harness and provide you with a 4-way. Are you towing or do you have an accessory with lights you need to power?
view full answer... - Plug And Play Trailer Wiring Harness For A 2026 Subaru Forester WildernessWelcome back Todd! Curt actually has a plug and play wiring harness for your 2026 Subaru Forester Wilderness out now! Check out the following part: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # C34FR72FT The plug this fits is underneath the rear threshold on the passenger’s side of the cargo area. The 4-Flat end also stores in the cargo area, so no need to mount a bracket anywhere or run the plug outside. It's really a pretty quick and easy install. What...
view full answer... - Recommended Custom Fit 4-Way Wiring Harness for a 2026 Subaru OutbackHey Michael congrats on the new Outback. To add a custom fit 4-way wiring harness to your 2026 Subaru Outback you will need the Curt item # C34FR72FT. You don't need to use a universal wiring harness that requires splicing. The Curt item # C34FR72FT wiring harness will add a 4-way connector to your Outback that will allow you to control a trailer or accessories lighting functions. It'll plug into a factory port located by the spare tire in your rear cargo area. If you also need a hitch,...
view full answer... - Recommended 4-Way Wiring Harness for a 2026 Subaru ForesterNo, it does not John but I have one that does! To add a custom fit 4-way harness to your 2026 Subaru Forester you'll need the Curt item # C34FR72FT. This is a plug and play wiring harness that plugs into a factory port in your rear cargo area. What do you plan on using the wiring harness for? Are you towing a trailer or putting lights on an accessory like a bike rack?
view full answer... - Availability of Curt 56580 Wiring HarnessHey Carl! The Curt T-Connector Vehicle Wiring Harness # C34FR72FT you were looking at is the Curt 56580. We do have it in stock, and the price can be found further down on this answer page as well as the actual product page. This is designed to fit the 2026-2028 Subaru Outback and Forester. What kind of vehicle do you have?
view full answer... - Recommended 4-Way Trailer Wiring Harness for a 2026 Subaru OutbackWe sure do Johnny and thanks for the information! To add a 4-way trailer wiring harness to your 2026 Subaru Outback, you'll need the Curt item # C34FR72FT. This harness is custom fit and plugs into a factory port located in your rear cargo area by the spare tire. The Curt item # C34FR72FT will provide your Outback with a 4-way connector that is capable of controlling a trailer or accessories lighting functions. What kind of trailer are you pulling or are you needing the 4-way for lights...
view full answer... - Which Hitch is Better for a 2026 Subaru Forester Premium Hybrid? Curt or EcoHitch? I sure can Daniel. The EcoHitch Hitch item # 306-X7391 and the Curt Hitch item # C47HR have identical installation methods. They replace your 2026 Subaru Forester's rear bumper beam so the entire cross tubes for both hitches will be completely concealed. Better clearance does go to the EcoHitch Hitch item # 306-X7391. When we installed it on a 2025 Forester the top of the inside of the receiver sits 15" above the ground. The top of the inside of the Curt Hitch item # C47HR sat an inch...
view full answer...
Do you have a question about this Custom Fit Vehicle Wiring?
Info for this part was:
Edited by:
Katherine B
Installed by:
Andy C
Written by:
Kim H
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Christopher H.
11/2/2026
Glad this was a simple install Jeffrey! Really appreciate the photos. Plug and play is definitely the way to go when available. What are you going to be hauling that requires the wiring?