Wire Color Identification of Tow Bar 4-Way Wiring for Splicing in Additional Lighting
Published 04/16/2020
Products Featured in This Question
Question:
Thank you for your quick response. One other question. Could I also use the multi-tow trailer connector (HM47570) to do the same thing. I already have a 7-pin to 4-pin converted (PK12716) that I use for hooking up a trailer. Could I hook both up then to the multi-tow connector and use it simultaneously or will it only allow one of the connections at a time?
asked by: Norm C
Helpful Expert Reply:
The green wire of the 4-way connector you sent in a picture of is the right turn/stop circuit, the yellow is left turn/stop, brown is running light, and white is ground. You could use the # 18252 to easily splice into the circuits as well to make an additional connector.
Product Page this Question was Asked From
Universal Magnetic Tow Lights - Red LEDs - 20' Wiring Harness with 4-Way Flat Trailer Connector
- Flat Tow Wiring Harness
- Bypasses Vehicle Wiring
- Removable Tail Light Kit
- Universal Fit
- 4 Flat
- Peterson
more information >
Continue Researching
- Q&A: Can 4-Flat Plug Be Cut Off Of Blue Ox Plug-In Tow Bar Wiring Kit BLU92HR
- Q&A: Is Vevor RN-QVR 7500 Tow Bar Compatible With Blue Ox Base Plates
- Q&A: Parts Needed to Flat Tow a 2013 Chevrolet Sonic Sedan Automatic Behind a Motor Home
- Q&A: Flat Tow Set Up For 2022 Chevy Colorado
- Q&A: Parts Needed to Flat Tow a 2016 Ford Fiesta SE Behind an RV
- Q&A: Which Accessories are Needed to Flat Tow 2013 Chevy Sonic
- Q&A: What is the Difference Between the Blue Ox Patriot BRK2019 & BRK2022?
- Article: Can You Flat Tow a 2025 Cadillac Escalade?
- Article: Most Popular Wheel Bearings
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: How Level Should a Tow Bar Be When Flat Towing
- Article: How to Choose a High-Low Adapter
- Article: Flat Towing Package for 2007-2018 JK Jeep Wrangler and Wrangler Unlimited
- Article: Tow Bar Wiring: Which Wiring Kit is for You?
Norm C.
4/16/2020
Thank you for your quick response. One other question. Could I also use the multi-tow trailer connector (HM47570) to do the same thing. I already have a 7-pin to 4-pin converted (PK12716) that I use for hooking up a trailer. Could I hook both up then to the multi-tow connector and use it simultaneously or will it only allow one of the connections at a time?