7-Way to 4-Way Adapter for 2024 Hyundai Palisade

Question

Question:

Looking for a 7 prong to four prong adapter for a 2024 hyundai palisade OEM trailer harness S8F67 AC700 Cant really determine which ones on your site will work. Thanks!

asked by: Linda C

0

Expert Reply:

Any 7-way to 4-way adapter will work with the 7-way on your Palisade. The # PK12716 you were looking at is usually what I recommend since it has a low cost and small size to store in the vehicle. If you want one that also acts as an extension you can use the # HM47065.

expert reply by: Robin H

0

Linda C.

5/1/2024

I have to disagree with you as far as any 7 to 4 will work. I have an adapter that I used on my 2017 toyota tundra & it does not work/fit. It was way too loose. Are you sure about your recommendations & what is your return policy? Thanks!

Reply

Robin H.

5/1/2024

@LindaC this fits any standard 7-way connection which is what it looks like you have from the picture you just sent. If the Pollak adapter ends up too loose, I would expect the same from any 7-way trailer connector as well which would really be a problem with the Hyundai part and not all of the 7-ways out there. Pollak also makes a lot of the OEM connectors you see on trucks and SUVs so in a sense they set the standard. Do you have the locking tab on the inside of the cover? If so it will be held in place and kept secure by that tab. I attached a link to our return policy below.

Helpful Links

customer-service-ordering.aspx#returns

Reply

Answer 1

If your Discover has the 7-way connector that uses the round pins like part #PK11720, we do not offer a pre-made adapter, but one can be easily constructed using a 4-pole vehicle end connector like part #18002 and a 7-way round pin trailer end…

view full answer...

Answer 2

The Adapter 4-Pole to 7-Pole and 4-Pole part #37185 is a great and easy way to convert the 4-way you have to the 7-way you want and still have a working 4-way if needed in the future. This is a simple plug and play installation if you are only…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

The appropriate torque spec for any application will vary depending on the construction of the wheel as well as on the stud size. I suggest checking the wheels you're using to see if their manufacturer has a suggested torque rating. Steel trailer…

view full answer...

Answer 5

Good question, Corey. Since the Americana 14" Aluminum AM03 Series Black Wheel #AM48NR is designed for use on 1/2-20 lugs, you will want to torque the lug nuts to between 75 to 85 ft-lb. I included an image showing all the torque values we have…

view full answer...

Answer 6

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 7

Did the Westin Sportsman grille guard originally come off the same truck you are trying to fit it to? Is the truck a 1500 or a 2500/3500?

view full answer...

Answer 8

Hey Eric, I am not seeing any other messages from you so I wonder if there was maybe a typo in your email address. But anyway for a hitch the etrailer part #e24ZV would be a great option for your 2025 Hyundai Santa Fe. Then for trailer wiring the…

view full answer...

Answer 9

Hey Larry, for your 2022 Mazda CX-5 I would recommend the etrailer hitch part #e98902 as it's mostly hidden with only the hitch opening hanging below the rear bumper and also it has great towing capacities. Will you be towing a trailer or is this…

view full answer...