Stromberg Carlson Electric Trailer Jack - Drop Leg - A-Frame - 24" Lift - 3,500 lbs - White
(611 reviews)
Price: $208.91
In Stock
Stromberg Carlson Electric Trailer Jack - Drop Leg - A-Frame - 24" Lift - 3,500 lbs - White
Item # JET-3555
Retail:$250.96
Our Price: $208.91
You Save: $42.05
This item qualifies for Free Shipping
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (611)
- Q & A (0)
- Photos
Stromberg Carlson Camper Jacks - JET-3555
- Pop Up Camper
- Teardrop Camper
- Travel Trailer
- A-Frame Jack
- Leveling Jacks
- Tongue Jack
- Electric Jack
- 1 Jack
- 24 Inch Lift
- Stromberg Carlson
- Bolt-On
- Weld-On
Use this electric tongue jack to lift your trailer with the flip of a switch. The steel jack has 19" of travel and a 5" drop leg for extra lift. Extends 6" in 32.2 seconds with 1,000 lbs of tongue weight.
Features:
- Electric jack with 12V motor lets you lift and lower your A-frame trailer quickly and easily
- Top-mounted toggle switches are easily accessible
- Large LED side lights make it simple to set up your camper at night
- Also ease weight distribution hookup and disconnect
- Bubble level on top of housing helps you level your trailer
- Bull's-eye design shows front to back and side to side
- Built-in clutch protects gears and motor
- Drop leg allows for greater adjustability
- Rust-resistant powder coated steel parts are strong and durable
- Housing is made of vacuum-formed plastic for protection from the elements
- White cover is painted to resist yellowing
- Round, zinc-plated steel footplate provides stability
- Emergency crank (included) allows you to manually operate jack if needed
- Easy bolt-on or weld-on installation for A-frame trailers
- 3-Star washer included to ensure good ground connection
- Mounting holes fit 3" spacing
Specs:
- Bracket height:
- 8-1/2" Retracted
- 27-1/2" Extended
- Total Lift: 24"
- Travel: 19"
- Drop leg: 5"
- Travel speed (w/ 1,000-lb tongue weight):
- Extends 6" in 32.2 seconds
- Retracts 6" in 28.4 seconds
- Clearance from bottom of mounting plate to top of jack: 23"
- Lift capacity: 3,500 lbs
- Outer tube diameter: 2-3/16"
- Inner tube diameter: 1-15/16"
- Footplate diameter: 5-1/2"
- Power wire: 10 gauge
- Motor draws 30 amps under load
- 2-Year warranty
How to Determine the Lift Capacity You Need in a Jack
A trailer jack is designed to lift the tongue of your trailer so you can connect the trailer coupler to your hitch ball. To do this, you'll need a jack with a lift capacity high enough to handle your trailer's tongue weight.
Tongue weight is the amount of weight that your trailer applies to the back of your tow vehicle. Typically, your tongue weight should be 10-15% of your total trailer weight (trailer + cargo). In other words, a 10,000-lb trailer would have a tongue weight between 1,000 lbs and 1,500 lbs. For a trailer this size, you would need a jack with a lift capacity of at least 1,500 lbs.
It's okay to have a jack with a weight rating that is higher than your trailer's tongue weight. In fact, a jack with a higher lift capacity should operate more efficiently, allowing you to spend less time cranking and more time camping.
Trailer and Camper Jack Lift
Every jack offers a certain amount of lift or travel. Screw travel is the distance the jack extends when you crank it (or toggle it to "extend" on an electric model). Some jacks include a drop leg for extra adjustability. On these jacks, you'll see the maximum extension of the drop leg listed in the specs as well. Adding the screw travel and drop leg travel together will give you the total lift. The total lift listed above can help you determine how high this jack will be able to raise your trailer.
JET-3555 Stromberg Carlson Electric A-Frame Trailer Jack - White - 24" Lift - 3,500 Pounds
California residents: click here
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
- Wrong item was ordered
- etrailer mistake
Customer Reviews
Stromberg Carlson Electric Trailer Jack - Drop Leg - A-Frame - 24" Lift - 3,500 lbs - White - JET-3555
Average Customer Rating: 4.8 out of 5 stars (611 Customer Reviews)
Use this electric tongue jack to lift your trailer with the flip of a switch. The steel jack has 19" of travel and a 5" drop leg for extra lift. Extends 6" in 32.2 seconds with 1,000 lbs of tongue weight.by: Bob 11/18/2022
Jack works very well. Not fast but gets the job done. Unfortunately I can't lower my tailgate fully without hitting the jack. Tried to rotate the head as I saw some jacks allowed. This one won't allow that. Very satisfied otherwise. Used less than one full season so can't offer an opinion on durability.
by: Otto S.09/28/2016
Mounted quick and easy. Plenty of wire for electrical hook up. Lots of power even with a full load of water in the front tank. The only change I made to installation was longer bolts to accept washers and nuts to the bottom side of hitch. I didn't trust the taped holes in the thin hitch frame. This was no fault of the new jack. Still working strong. A back saver that's worth the money. I should have bought one years ago!
Otto S.
9/28/2017
What a wonderful invention. Caution must be used when retracting. Too bad some kind of stop isnt used. But it sure works good!
by: 08/24/2023
Put this jack on the trailer tongue in less than an hour. Moves the tongue of a 29' 6500 lb travel trailer up and down easily. I did not find it particularly slow. Install tips: I used a two ton bottle jack and static jack stand to support the tongue while working. Check trailer negative grounding with a voltage tester, just to be sure you get a good circuit. I attached power cord via fuse directly to positive battery terminal and stowed the extra wire/fuse in the battery box. (My trailer has a power line and blade-fuse from the trailer's junction box for the previous jack but it had an occasional short so I didn't use it. If your trailer has a dependable powerline for a jack, use it.) I'm putting a 10L dry-sack over the powerhead to keep out rain, road dirt and bugs. An extra layer of protection never hurts. I hope this holds up better than the factory installed L*****t. I'll write a follow up review in a year or so. And as always, thanks etrailer for great service, great prices, and fast shipping.
by: Eric03/18/2018
I purchased 2 of these a year ago to replace a hand crank on a cargo trailer. I wanted to modify the tongue of a trailer where the crank was in the way of loading and unloading a work van. The push of a button, in this case two, is way easier and much faster than old school hand power. It worked out so well, I did a dump trailer as well. Then, a friends trailer. I might be starting a trend.
by: Yvon03/21/2018
Product was conform to description, easy to install and work great, I completed installation in less than 30 minutes.
Yvon
3/21/2019
My Stromberg Carlson power jack is still working well. As for all my belongings I take good care of it, that should make it work for a long time I hope...
by: Paul R10/07/2017
Great service from etrailer.com. Ordered the jack and a Fastway e2 Trunion hitch on Saturday, and had them at my door the following Wednesday.
Got everything installed today and all works great. I did notice that even with proper torquing, the mounting plate on the jack bent a bit under load of my Flagstaff pop-up. Works great...but I'll have to keep an eye on that mount. Directions call for an underplate, which I don't have room for on my trailer tongue.
by: Scott06/22/2018
I had this jack on my last trailer and I liked it. It is nice that it has a level as part of the cover to get you close. My trailer is 5,500 lbs and this jack has no issues with lifting the tongue. I do not like the glass fuse and holder that comes with it. The same fuse holder failed on my last trailer. So when I ordered this one for my new camper I stopped by the auto parts store and got a good quality sealed blade fuse holder. I thought I had read that this did not come with the mounting bolts. It does. I used longer bolts with additional fender washers and lock nuts. Ordering from etrailer is the best. It was convenient, easy, and the price is really good.
by: Vern N07/29/2017
I ordered the Stromberg Carlson electric tongue jack from etrailer told them I needed it right away because we were traveling and mine had broke. They shipped it right away. I had it on the 3rd day I installed it and was back on the road. This is not the first time I have used etrailer and it will not be the last.
by: Christopher 05/26/2023
It works! It fit! The little bubble level on top doesn't seem to be accurate but I didn't buy it for the level anyway; price I think drove my decision.
by: Allen05/17/2019
Installed in minutes, holes lined up like they should. Just added a connection to wire and hooked it to battery and everything worked good. No more hand cranking and it looks good on the camper!
by: Steve02/08/2017
I can't review the electric trailer jack since it is winter and I won't be installing it for several months. But I can rate etrailer and the order speed. I ordered the jack on Sunday evening and it was delivered Wednesday morning. No problem there!
Steve
2/8/2018
I love the jack, far less effort for a retiree and the manual jack was starting to feel like it was worn and might slip. I keep the manual jack in the trailer just in case but I had zero problems with the electric jack and used it dozens of times last summer.
by: Larry 09/17/2022
Installed easily and I chose to power it from my truck, which meant I only had to add an RV plug to match trailer connection. Minutes later it was operational and has performed perfectly for a year. Nice smooth operation and wintered well. Quite happy! A++
by: Jeff 12/16/2022
The only thing keeping this from a 5 star review is the fact that the description says it has 24" lift but the actual fact is an 18" lift with a 5" extension foot giving it a 23" lift total. Other than that it does exactly what it says and appears to be well built. ETrailer has always provided great delivery and service.
by: Troy07/05/2018
Well packaged.(bought brand "x" on another site first,arrived broken).Easy installation.Works great.I highly recommend this product.Makes hooking and unhooking much easier.I have bought several products from e.trailer,never disappointed.
Troy
7/8/2019
I have used it a lot. Has never missed a beat.
by: Mark M.04/28/2019
I installed this Stromberg Carlson electric jack about a year ago. Installation was very easy (I installed it while hitched to tow vehicle - don't use your stabilizers to hold your up your trailer weight). The jack worked great on several outings last year - great time (and back) saver when setting up. However, we just bought a bigger trailer (used) and I wanted to swap this with the factory electric jack on the new trailer. The dealer agreed it was a good jack but he wouldn't let me swap. Oh well, I'll probably be replacing that one with another Stromberg Carlson soon. Also, I found the best price here of all vendors when I initially shopped for it.
by: Carl m07/28/2017
Easy took about 15 mins to install and test . kind of slow but will work fine like it came with a crank in case battery is dead .was shipped very fast
by: Mike M.03/17/2017
After a year of use, I am still very pleased with my electric Jack. It moves up and down at a good speed. It handles the 700 lbs of tongue weight of our travel trailer with no struggle. It is relatively attractive compared to some others. The white cover matches the propane bottle cover behind it. My only complaint is I wish the lights were a little brighter. They are better than fumbling with a flashlight in the pitch dark, but just not as bright as I had expected. All in all, I am very pleased and would buy another without any reservation.
by: Georgia06/20/2019
Put it on my trailer last year, used it twice camping last year and went out for the first time this year and it doesn't work!! Had to use the hand crank!!
Mike L.
6/21/2019
The first step in troubleshooting is to check that the jack is receiving power from the trailer mounted battery, and to check the power connections and the battery ground to the trailer. Youll also want to make sure that the spot where the jack bolts to the trailer tongue isnt corroded, as corrosion will interfere with a good ground connection. The jack is covered by a 2 year warranty, so if the items I mentioned above check out okay, please contact our Customer Service folks at 800-298-8924.
by: bob06/09/2016
AWESOME PRODUCT WORKS WELL LIFTS MY TRAILER FOR HOOK UP AND DISCONNECT WITH EASE
Bob
6/9/2017
AWESOME
by: Luke07/26/2018
The jack works great, easy install. Free shipping was nice too...
Luke
7/26/2019
Great
by: Cole05/27/2015
Item is well packaged from factory for shipping. Received item quickly from warehouse. Time to install from opening package to lifting the camper was 8 minutes 30 seconds. It took 3 minutes to look at the fuzzy diagram on where the star nuts go when putting the three bolts back into the frame. Be sure to have a 10-12 gauge butt connector or something equal to your application, as no electrical connections are supplies. All in all, I would buy this again and will recommend this to others who might need to have an electrical jack replaced.
by: Raymond07/16/2019
My existing jack is unreliable and the new product should do that for me.
Raymond
1/5/2021
This new jack has been smooth, quiet, strong and reliable after over a year of use. It was a welcome upgrade over the original jack.
by: Cecilia04/08/2018
Love our jack! Lifting out trailer just got so much easier! Now if only the jack removed grease from the hitch ball!
by: Ronald 09/28/2018
The installation was easy and the new jack works very well. Better than the original.
The only problem - No wire connectors or fuse in the package. Had to buy some at local hardware.
Enjoyed the fast shipment.
Will be using this week on a fall trip to Vermont
by: Timothy11/06/2018
This product arrived within a couple of days after ordering. It was in good shape and ready for installation. It was an easy, quick install and works very well. I am completely satisfied with this jack and will probably order from etrailer.com again.
25
611
Show More Reviews
See what our Experts say about this Stromberg Carlson Camper Jacks
- Stromberg Carlson Jack JET-3555 be Rotated to Match the Bolt Holes on a Trailer?The head on the Stromberg Carlson # JET-3555 is fixed in place and cannot be rotated. However, if you are referring to rotating the whole jack to get the holes to line up on mounting bracket, then yes you can.
view full answer... - What Electric Trailer Jack Has Shorted Retracted HeightThe electric jack we have that has the lowest retracted height is the Stromberg Carlson part # JET-3555 which has that dimension at 8-1/2 inches. Everything else is going to be 9 inches or more.
view full answer... - Troubleshooting a Jammed Electric Trailer JackIt is likely that the interior gears have stripped due to the jack over-extending. Since manually cranking the jack is unsuccessful, you will probably need to replace the jack, as the jack manufacturers will smash or otherwise distort the end of the screw that turns to move the leg up and down to prevent it from over-extending. If it does end up extending too far the threads will become permanently cross-threaded and it will never work right again.
view full answer... - What Do the Two Switches on the Electric A-Frame Tongue Jack # JET-3500 ControlThere are two switches on the Electric A-Frame Tongue Jack # JET-3555 that you referenced. One is for the light and one is for raising and lowering the jack. Check out the review video I attached as well.
view full answer...
- Troubleshooting New Trailer Jack That Doesn't Operate but the Lights Work FineIf you are able to operate the lights on your electric trailer jack, like the Stromberg Carlson # JET-3555, but not the jack itself then you either have a battery that isn't fully charged or the jack itself doesn't have a good ground. The lights on a jack don't draw much power but the operation of the jack does. Check either the ground wire or your mounting hardware (however your jack grounds) to make sure that your jack has a good, solid, clean connection. If it does then you will need...
view full answer... - Recommended Power A-Frame Jack For Travel Trailer With 770lb Tongue Weight RatingFor your travel trailer with 770lbs tongue weight and a weight distribution hitch being towed by your 2007 Dodge Ram I recommend the Stromberg Carlson Electric Trailer Jack - Drop Leg - A-Frame - 24" Lift - 3,500 lbs - White Item # JET-3555. This jack fits the industry standard A-Frame jack mounting point and its 3500lb capacity will be plenty for the tongue weight of your trailer, and will be able to jack up the trailer once connected to the weight distribution shank of your system to...
view full answer... - Ground Clearance Dimensions for the Stromberg Carlson Electric A-Frame Jack # JET-3555The retracted heights of the Stromberg Carlson Electric A-Frame Jack, # JET-3555, is 8-1/4 inches from the mounting bracket to the bottom of the outer tube and 9-1/8 inches from the mounting bracket to the bottom of the foot.
view full answer...
- Recommended Replacement Jack For Lippert Smart Jack With Damaged Buttons Causing Water To Get InI have a complete replacement jack option for you, but the buttons on your Lippert Smart Jack # LC643589 are not replaceable so the only option is a complete replacement. If your jack is still within the 1-year warranty period then I recommend reaching out to whoever you purchased from to get it replaced. If you are outside of your warranty period then you should take a look at the Stromberg Carlson Electric Trailer Jack - Drop Leg - A-Frame - 24" Lift - 3,500 lbs - White, Item # JET-3555....
view full answer...
- Troubleshooting A-Frame Jack That Has Limited Travel With Electric But Works ManuallyYou said you are able to raise or lower the # JET-3555 with the hand crank so that rules out the gears or the motor being seized. My contact at Stromberg-Carlson told me they think there may be an intermittent problem with the wiring like a ground. Check the ground connection and make sure it is attached securely to a clean bare metal surface and also check for any damaged wire. You can also pull the cover off the jack and inspect the wiring and any other parts to see if you can find...
view full answer... - Troubleshooting Powered A-Frame Jack Not Powering Up or Down with Flickering LightSounds like a weak battery powering the jack, or the wiring of the jack isn't solid enough and you have an intermittent connection. So check to make sure the battery of the trailer has a solid charge, and then next check the wiring connections of the jack noting that it grounds through the mounting hardware so it needs the mount needs to be clean between it and the trailer frame.
view full answer... - Do All A-Frame Trailers have Same 3 Bolt Pattern for Trailer JacksYes, basically all A-frame trailers are going to have the same bolt pattern for installing a trailer jack. Typically the jacks have mounting holes that are somewhat slotted too to help with some variances. The bolt pattern you mentioned having on your trailer is compatible with the Stromberg Carlson Electric Trailer Jack # JET-3555 so this will work great for you.
view full answer... - Recommendation to Prevent Topping out the Stromberg Carlson Trailer Jack JET-3500 and Blowing FuseWhen the jack reaches maximum height the threads of the jack that raise the jack distort which causes the jack to stop moving, in doing so it can overdraw the motor and blow the fuse like what you are experiencing The best solution I can recommend is to simply stop letting the jack reach its maximum height, I realize that can be easier said that done. So I would recommend you mark the inner leg of the jack right below the bottom of the outer leg with the jack extended right before the...
view full answer... - A-Frame Electric Trailer Jack Won't Run but the Light WorksIf the jack light is working but the motor won't that means that the jack is getting power so we can rule out the fuse/breaker being the problem. It is possible that the battery the jack is connected to has enough power to run the light but not the motor. The battery may need to be charged or replaced. A local auto parts store can test the battery. Another possible cause is a weak ground. The light doesn't need to have the best ground but the motor which draws more amperage does need a...
view full answer... - Can the Stromberg Carlson Electric Jack Part # JET-3555 be Ran to the Vehicle's Battery The length of wire needed to attach the Stromberg Carlson Electric Trailer Jack part # JET-3555 to your vehicle's battery is more than likely causing a substantial loss in power which is why the jack will not work. I recommend installing a 12 volt auxiliary battery on the trailer and use that to power the jack. You can then use the 12 volt power on the trailer connector (7-way only) to provide a maintenance charge for the battery used for the jack. I have attached a review video for you.
view full answer... - Electric Tongue Jack For 2017 Casita Spirit Deluxe Travel TrailerShort answer is Yes. The Stromberg Carlson Electric Trailer Jack - Drop Leg - A-Frame - 24" Lift - 3,500 lbs - White # JET-3555 has the strength to work on your 2017 Casita Spirit TT. It will mount to an A-Frame you just need to make sure you have the space to mount it. It is a bolt on design with mounting holes that fit 3 inch spacing. You will need to drill holes in the A-Frame however to match the holes in the jack. The outer tube is 2-3/16 inches wide. So if you have a gap that it...
view full answer... - Can an A-Frame Jack be Rotated on the Trailer for Hatch ClearanceYou can rotate an A-frame jack like the Stomberg Carlson Jack part # JET-3555 that you referenced if needed to allow you to open your rear hatch. The bolt pattern of the jack is allows for mounting of the jack in any orientation.
view full answer... - How Does the Stromberg-Carlson Electric Jack Wire for InstallationTypically these powered jacks would get their power from a trailer mounted battery that is maintained via the 7-Way on the truck. The truck would keep the battery topped off when towing down the road and the jack would pull the amperage it needs from the trailer battery. So yes, you would attach this Electric A-Frame Tongue Jack # JET-3555 to the positive side of the battery for installation.
view full answer... - Tube Thickness Of The Stromberg Carlson Electric Trailer Jack I went out to the warehouse and measured the Stromberg Carlson Electric Trailer Jack # JET-3555 with a digital caliper and got the same measurements as what is written in the product description. Randy should have used a caliper instead of a tape measure to take away any guesswork on the dimensions.
view full answer... - Recommended Electric Tongue Jack for 2006 Gulfstream Cavalier Travel TrailerA 3500 lbs electric tongue jack would be a good fit for your 6200 lbs 2006 Gulfstream Cavalier travel trailer. Based on your trailer weighing 7000 pounds loaded you will have an approximate tongue weight of 700 pounds. I would recommend the Stromberg Carlson # JET-3555 (white) or # JET-3755 (black) as they are rated at 3,500 lbs. I have also included an FAQ for you too. One item I highly recommend is the Ultra-Fab Protective Cover # UF38-944020. With the electric jack being out in the...
view full answer... - Replacement A-Frame Jack Recommendation for a 2011 Keystone Passport Ultra LiteThe Electric A-Frame Tongue Jack # JET-3555 that you referenced was designed to fit basically all a-frame trailers. Since yours had an a-frame powered jack on it already this would work well as a replacement for it. This jack has a 3,500 lb lifting capacity which would be more than enough. Check out the review video I attached as well. For a black version similar to this you would want the part # JET-3755.
view full answer... - Troubleshooting Electric Trailer Jack that Doesnt work When Not Connected to a Tow VehicleThe problem is most likely the ground circuit for the jack. Since most trailers ground to the tow vehicle it sounds like the jack isn't able to ground properly when you are trying to power it with just your trailer. The jack grounds through it's mounting hardware to the trailer frame. If the trailer isn't grounding to a vehicle like when it is connected to your vehicle it won't work.
view full answer... - Troubleshooting Electric Camper Tongue Trailer Jack that Just Clicks Instead of Raising or LoweringBefore you replace the jack make sure the jack is grounded properly to the frame of your trailer, also check to make sure the main ground of your trailer connector is attached to a clean metal surface. Also check to make sure the 12 volt battery you are using has a good charge as it sounds like the jack isn't able to get enough amperage to operate when under a load. The jack sounds like it's making the same sound a car starter will make when the battery is either dead or the battery terminals...
view full answer... - Recommended Electric Power A-Frame Jack for a 28-Foot Jayco Travel TrailerYes. A 3,000 pound electric jack will work just fine. Based on your trailer weighing 7,500 pounds loaded will equate to your tongue weight between 750-1125 pounds. Although you can choose a 2,500 pound (see link attached) electric jack, I would highly recommend the Stromberg Carlson # JET-3555 (white) or # JET-3755 (black) as they are rated at 3,500 pounds. I think you will really like the price point! I have also included an FAQ for you too.
view full answer... - Does the Electric A-Frame Tongue Jack # JET-3500 Have to Face ForwardYes, you can install the Electric A-Frame Tongue Jack # JET-3555 that you referenced with the switch side facing any direction. Having the switches be facing backwards or to the side would allow more tail gate clearance.
view full answer...
Do you have a question about this Camper Jack?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Adam R
Video Edited:
Jacob T
Installed by:
Cole B
Video by:
Chris R
Updated by:
Shelly K
Updated by:
Samantha S
Updated by:
Mike S
Written by:
Wilson B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Bob
11/19/2023
Worked well all season. The jack is covered while in storage. No issues using it after its been in storage. I have a solar battery tender so theres plenty of power to get it out of storage.