Lippert Power Stance Electric Trailer Jack with Footplate - A-Frame - 18" Lift - 3,500 lbs
(74 reviews)
Price: $253.30
In Stock
Lippert Power Stance Electric Trailer Jack with Footplate - A-Frame - 18" Lift - 3,500 lbs
Item # LC69VR
Retail:$281.10
Our Price: $253.30
You Save: $27.80
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (74)
- Q & A (0)
- Photos
Lippert Camper Jacks - LC69VR
- Pop Up Camper
- Teardrop Camper
- Travel Trailer
- A-Frame Jack
- Leveling Jacks
- Tongue Jack
- Electric Jack
- 1 Jack
- Lippert
- Bolt-On
Electric jack lets you raise and lower your A-frame trailer quickly and easily. Auxiliary power cord (sold separately) lets you power the jack directly from the 7-way on your vehicle. Extends 6" in 47.1 seconds with 1,000 lbs of tongue weight.
Features:
- Electric jack lets you raise and lower your A-frame trailer quickly and easily
- Power Swap auxiliary cord (sold separately) allows you to power the jack directly from the 7-way on your tow vehicle
- Cord can be stored under jack cover when not in use
- Integrated storage ring keeps safety chains off the ground when not in use
- 3 LEDs illuminate the area for simple nighttime setup
- Helical-cut gears with angled teeth gradually mesh for quiet, efficient operation
- Crank-thru socket allows you to manually operate jack if needed
- Easy bolt-on installation - hardware included
- Heavy-gauge steel construction ensures durability and strength
- Black powder coat finish resists rust and corrosion
- Durable, textured housing prevents chips and cracks
Specs:
- Bracket height:
- 10-3/4" Retracted
- 28-3/4" Extended
- Lift: 18"
- Travel speed (w/ 1,000-lb tongue weight):
- Extends 6" in 47.2 seconds
- Retracts 6" in 43.5 seconds
- Footplate diameter: 5-1/2"
- Power consumption: 30 amps
- Lift capacity: 3,500 lbs
- 1-Year limited warranty
How to Determine the Lift Capacity You Need in a Jack
A trailer jack is designed to lift the tongue of your trailer so you can connect the trailer coupler to your hitch ball. To do this, you'll need a jack with a lift capacity high enough to handle your trailer's tongue weight.
Tongue weight is the amount of weight that your trailer applies to the back of your tow vehicle. Typically, your tongue weight should be 10-15% of your total trailer weight (trailer + cargo). In other words, a 10,000-lb trailer would have a tongue weight between 1,000 lbs and 1,500 lbs. For a trailer this size, you would need a jack with a lift capacity of at least 1,500 lbs.
It's okay to have a jack with a weight rating that is higher than your trailer's tongue weight. In fact, a jack with a higher lift capacity should operate more efficiently, allowing you to spend less time cranking and more time camping.
Trailer and Camper Jack Lift
Every jack offers a certain amount of lift or travel. Screw travel is the distance the jack extends when you crank it (or toggle it to "extend" on an electric model). Some jacks include a drop leg for extra adjustability. On these jacks, you'll see the maximum extension of the drop leg listed in the specs as well. Adding the screw travel and drop leg travel together will give you the total lift. The total lift listed above can help you determine how high this jack will be able to raise your trailer.
813748 Lippert Components (LCI) Power Stance 3500 Electric Tongue Jack - 18" Lift
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
- Wrong item was ordered
- Did not arrive in time
Customer Reviews
Lippert Power Stance Electric Trailer Jack with Footplate - A-Frame - 18" Lift - 3,500 lbs - LC69VR
Average Customer Rating: 4.7 out of 5 stars (74 Customer Reviews)
Electric jack lets you raise and lower your A-frame trailer quickly and easily. Auxiliary power cord (sold separately) lets you power the jack directly from the 7-way on your vehicle. Extends 6" in 47.1 seconds with 1,000 lbs of tongue weight.by: Ron11/18/2022
The product works as designed. Easy to install and I have used it approximately 20 times in the last year. The storage for the 7 pin connector and safety chains are a great option. Keeps things nice and tidy when unhooked. I highly recommend this Jack.
by: William01/21/2024
The service and shipping were beyond my expectation. I will be installing this to replace my original jack that failed soon. Thanks for the help and quick service !!!
by: Abdul07/02/2023
Works as shown, easy to install
by: Murray 09/07/2022
Fast shipping & accurate description. Easy to replace our worn out electric jack. Removal and installation took less than an hour. Very handy having a place to hang the chains. The LED light is also a plus. We've had it over a year installed, with no issues!
by: Todd 09/18/2022
It was easy to install and it is a great jack all the way around. Would highly recommend
by: Dewey 09/22/2021
Nice jack it operates quite like the fact it has a hanger to hang safety chains and rv plug storage
by: James 01/27/2022
Instalation was quick and easy. Operates perfectly! It looks good too! Etrailer & UPS was on the ball with shipping. Got it two days ahead of schedule!
by: Rodney 10/11/2021
It works great was easy to put on camper all the hardware came with it. It came on time within 3days.
by: Frank 11/17/2022
Easy to install and has worked great for the past year.
by: Tyler 09/21/2022
Outstanding Jack and service.
by: Chris 07/13/2022
Delivered quickly, Easy install. Works great!
by: Billie 12/03/2021
This is a Christmas gift so can't really provide a product review at this time. I can say the ordering process, free shipping and quick delivery were excellent, thank you!
by: Michael 04/15/2021
Very happy with the the overall experience. Timely delivery
by: Earl 03/10/2024
by: Michael 07/16/2021
Fast delivery fast install works great
by: Brian 08/01/2021
Item came 3 days earlier than expected, WOW!!!
by: Ledbetter09/20/2021
QUIET motor quick ship
by: Noah 02/22/2024
by: Sam 10/19/2021
by: Curry02/15/2022
by: Rebecca 08/10/2022
by: David 02/27/2021
by: Tyler 10/15/2021
by: Steve 02/24/2021
by: Kenneth05/29/2021
I was amazed at how quickly my replacement from etrailer arrived. I was a bit worried that the installation of my new jack would be more difficult that I expected. The reverse proved to be the case, it was very simple to place the trailer tongue on jack stands, remove the old jack and install the new one. As the old saying goes "even a cave man could do it."
25
74
Show More Reviews
See what our Experts say about this Lippert Camper Jacks
- Can the Lippert Power Stance Electric Trailer Jack Be RotatedYes, you can rotate an a-frame trailer jack like the Lippert Power Stance Electric Trailer Jack part # LC69VR. The mounting pattern is concentric which allows the jack to be rotated for clearance.
view full answer... - Will Lippert Power Stance Trailer Jack Fit On A-Frame Trailer With Limited Clearance?It sure will! I had our warehouse measure the Lippert Power Stance Electric Trailer Jack with Footplate - A-Frame - 18" Lift - 3,500 lbs # LC69VR you were looking at and from the back of the jack tube to the back of the head of the jack is 1-1/2" as shown in the included diagram. I included a video of the # LC69VR for you to take a look at.
view full answer...
- Standard Bolt Pattern for Jack Mounting Bracket on A-Frame Trailers.The 3-bolt mounting flange on the Lippert Electric A-Frame Trailer Jack # LC69VR has a standardized hole pattern. The bracket for mounting a jack on a A-frame trailer has a bolt pattern of 3 inches. The bolt holes may be different sizes which is why you'll see slotted holes on the jack.
view full answer... - Powered A-Frame Jack that Can Fit with 5 inches of Clearance to Propane TanksThe Lippert Power Stance Electric Trailer Jack part # LC69VR would work really well with the limited clearance you have as you can see in the attached picture that it does not hardly require any clearance behind the jack tube.
view full answer...
- Could Lippert Power Stance Electric Jack Fit 2016 Forest River FreedomWhat's great about trailer jack mounting brackets on A-frame trailers is that they are all the same dimensions so you could replace what you have now with the Lippert Power Stance part # LC69VR that you referenced on your 2016 Forest River Freedom.
view full answer... - Where Do You Connect The Power Wire Of A Lippert Electric Trailer Jack?The power wire for your Lippert Electric jack should be run to a dedicated 12v battery in your trailer, but it sounds like you have it wired to the break away switch battery. I recommend unwiring it from the break away switch battery as if you drain the battery by using the jack while it is unhooked from the vehicle you could run into an issue of the break away switch not working properly in an emergency situation. If you jack is the Lippert Power Stance Electric Trailer Jack with Footplate...
view full answer... - Weight of Lippert Power Stance Electric Trailer Jack The Lippert Power Stance Electric Trailer Jack w/ 7-Way Plug - A-Frame - 18" Lift - 3,500 lbs # LC89VR is 45 lbs at shipping. The packaging will likely be a couple lbs so you will want to consider that. The Power Stance without the plug # LC69VR has a shipping weight of 40 lbs.
view full answer... - Recommended Replacement Electric Tongue Jack for Airstream Land YachtThe type jack you are needing for your 28 foot 1972 Airstream Land Yacht, if you wish to replace with a similar type jack, is referred to as an A-frame Trailer Jack. Yes clearance with most of these jacks won't be great. For a powered option, I suggest the Lippert Power Stance Electric Trailer Jack with Footplate - A-Frame - 18" Lift, # LC69VR. While this wires in to the 12V system on your camper, you can also get the Auxiliary Power Cord for Lippert Power Stance Electric Trailer Jack,...
view full answer... - Lippert Electric Trailer Jack Power Cord LengthThe Auxiliary Power Cord for Lippert Power Stance Electric Trailer Jack # LC79VR is 6 feet long and designed to work with the Lippert Power Stance Electric Trailer Jack with Footplate - A-Frame - 18" Lift - 3,500 lbs # LC69VR.
view full answer... - Distance From Bracket to Top of Lippert Power Stance Electric Trailer JackI was able to get the measurement you were looking for of the Lippert Power Stance Electric Trailer Jack with Footplate - A-Frame - 18" Lift - 3,500 lbs # LC69VR. As you can see in the accompanying photo, the distance from the bracket to the very top of the jack is 21-1/2 inches. The jack will give you a total of 18 inches of lift and has a hefty 3,500 lb capacity. It is simple to use, and can even be powered from your tow vehicle's 7-way simply by adding one part, which is the Auxiliary...
view full answer...
- Recommended Electric A-Frame Jack for Travel TrailerIt's a smart idea to go from a manual A-frame jack to an electric jack because it is so much easier, and there is a great option that will work for your travel trailer that makes using the jack super simple. The jack I recommend for you is the Lippert Power Stance Electric Trailer Jack with Footplate - A-Frame - 18" Lift - 3,500 lbs # LC69VR. Not only is this jack easy to use, allowing you to retract or extend with the flip of a switch, but you can power it via your truck's 7-way by adding...
view full answer... - Compatible Drop Leg For The Lippert Power Stance Electric Trailer Jack Yes, I went out to the warehouse and test fit legs on the Lippert Power Stance Electric Trailer Jack # LC69VR and found that the Drop Leg for Lippert Power Jack # LC405217 is a compatible match. This drop leg will slide into the inside of the inner tube and can be pinned in place with the included pin/clip.
view full answer...
- Recommended Replacement Electric Tongue Jack for Geo Pro TrailerThe Lippert Electric Trailer Jack part # LC285318 would likely be a direct replacement for the existing tongue jack. That said, there is a newer upgraded model in the Lippert Power Stance Electric Trailer Jack part # LC69VR so this is what I recommend for a full replacement. They both should work with the Jack-It. If you can provide me with the exact model number of the jack I can see if there is a replacement rocker switch assuming that's indeed the issue. The Lippert jacks all come with...
view full answer... - Does Lippert Power Stance Electric Camper Jack Come with 7-Way Plug?The Lippert Power Stance Electric Trailer Jack w/ 7-Way Plug - A-Frame - 18" Lift - 3,500 lbs # LC89VR comes with the auxiliary power wire for trailer 7-way power connection. However, the Lippert Power Stance Electric Trailer Jack with Footplate - A-Frame - 18" Lift - 3,500 lbs # LC69VR comes with the power wire for the trailer battery connection only. The Auxiliary Power Cord for Lippert Power Stance Electric Trailer Jack # LC79VR is sold separately and is 6 feet long.
view full answer... - Replacement Toggle Switch For Lippert Power Stance Trailer JackIt will indeed work; I just checked with Lippert for you and was able to verify the correct toggle switch for your Lippert Power Stance Electric Trailer Jack # LC69VR (which is the 813748), is the following: - Replacement Extend/Retract Switch for Lippert Electric Trailer Jack # LC49MD
view full answer... - Availability of Powered Side Mount Jack for Boat TrailerThe Lippert # LC69VR jack is meant for an A-Frame trailer and wouldn't be compatible with a straight or pole tongue trailer like what's used on a boat trailer without extensive fabrication work. This being said, we do have a side-mount powered trailer jack that would work well for you, The Fulton XLT, part # F141401. The jack has a 2500 lb lift capacity, as long as the tongue weight of your boat and trailer is under 2500 lbs, the jack would work great for you. The jack bolts into place,...
view full answer... - Gauge Wire for Install of Lippert Power Stance Electric Jack LC69VRWhen installing the Lippert Power Stance Electric Jack # LC69VR I'd recommend using 10 gauge wire like part # 10-1-1 which we sell by the foot as this would have the amperage requirements to power the jack.
view full answer...
Do you have a question about this Camper Jack?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Jameson C
Installed by:
Andrew K
Installed by:
Jeff D
Edited by:
Lindsey S
Video Edited:
Jacob T
Written by:
Kristina F
Updated by:
Mike S
Video by:
Aidan B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Ron
11/19/2023
Still works like new and this trailer gets used a lot. Great product.