Gauge Wire for Install of Lippert Power Stance Electric Jack LC69VR

Question

Question:

What size wire does this require?

asked by: Mike D

0

Expert Reply:

When installing the Lippert Power Stance Electric Jack # LC69VR I'd recommend using 10 gauge wire like part # 10-1-1 which we sell by the foot as this would have the amperage requirements to power the jack.

expert reply by: Jameson C

0

Answer 1

Thanks for the pictures, Donny. I didn't see a measurement for the outer bearing but I think we can still put this together based on everything else. It looks like that spindle has a 2.25" ID grease seal with a 1.75" ID inner bearing.…

view full answer...

Answer 2

Hey Alan! For your 72" slide topper awning, you will need to use an awning like Solera RV Slide-Out Awning - 73" Wide - Black #LCV000165063. This full awning kit is made for slide-outs between 68"-73" wide, so this would be the…

view full answer...

Answer 3

Hey, Mark! I'm not 100% sure what you mean by wanting to be able to rotate the jack, but you can change how the back is mounted on the trailer so that it's facing another direction. There is a picture attached below demonstrating what I mean.…

view full answer...

Answer 4

Hey Tanya, do you know any more info about the 2000 GMC truck? Is it a 1500 or a 2500LD? Or is it something different? Is it listed as a Sierra or one of the older C/K style trucks?

view full answer...

Answer 5

Hi Jeff! The etrailer Electric Trailer Jack w/ Foot Plate - A-Frame - 14" Lift - 2,000 lbs #e64GV would be a great option for your 7,000 pound enclosed trailer. The 2,000 pound capacity would definitely cover you and it uses the standard 3 bolt…

view full answer...

Answer 6

That's a great question, Neil! Yes, you can mount the etrailer Electric Trailer Jack #e23ZV facing to the side, similar to how your current Lippert jack is mounted. Manufacturers have gotten a lot better about this over the years, and the…

view full answer...

Answer 7

Hey Jeff. There is definitely a correlation between weight and capacity. I've listed the weight of all three of the Power Mountain Tallboy Off-Road Bottle Jacks we have below: Power Mountain Tallboy Off-Road Bottle Jack - 7-15/16" to…

view full answer...

Answer 8

Hey Donny! For your Dometic Penguin/Brisk Air 15,000 BTU AC model B59516.711C0-MX, the correct soft start is the #DMC93JF. This is designed for Dometic Brisk II electronic air conditioner units with in-wall thermostats.

view full answer...

Gauge Wire for Install of Lippert Power Stance Electric Jack LC69VR

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching