Scissor Stabilizer Jacks w/ Handle - 18-3/4" Lift - 5,000 lbs - Qty 2
(494 reviews)
Price: $69.27
In Stock
Scissor Stabilizer Jacks w/ Handle - 18-3/4" Lift - 5,000 lbs - Qty 2
Item # TJSCHD-24
Our Price: $69.27
Orders above $99 qualify for Free Shipping
In Stock
- All Info
- Reviews (494)
- Q & A (0)
- Photos
- Why etrailer?
etrailer Camper Jacks - TJSCHD-24
- Fifth Wheel Camper
- Pop Up Camper
- RV Motorhome
- Teardrop Camper
- Travel Trailer
- Stabilizer Jacks
- Scissor Jack
- 4001 - 5000 lbs
- 18-3/4 Inch Lift
- Bolt-On
- 2 Jacks
- etrailer
- Steel
These leveling scissor jacks with a 5,000-lb combined capacity will keep your RV level and stable. They adjust from 5" to 23-3/4" as your application requires. The bow-tie base steadies the jack on soft surfaces. Includes handle.
Features:
- Scissor jacks help to level and stabilize 5th-wheel, travel, horse and cargo trailers
- Bow-tie bases keep the jacks steady, even on soft surfaces
- 8-Hole top plates allow for adjustability when mounting
- Bearing set on crank side extends jack life
- Black powder coat finish resists corrosion
- Handle included
Specs:
- Height:
- Collapsed: 5"
- Extended: 23-3/4"
- Lift: 18-3/4"
- Length: 24-7/8" when fully collapsed
- 26" Long including nut
- Mounting base: 10" long x 3-1/4" wide
- Mounting holes: 5/8" long x 3/8" wide
- Round holes: 5/16" diameter
- Lift capacity: 5,000 lbs
- 2,500 lbs per jack
- Quantity: 2 jacks
Note: This jack set is designed to stabilize a portion of your trailer's weight, not to support the full GVWR of your trailer. Do not use these jacks to lift your trailer or RV. Doing so will exceed the capacity of the jacks.
TJSC-24 Ram Scissor Stabilizer Jack - 18-3/4" Lift - 5,000 lbs
TJSC-24-HD Crank Handle for etrailer and Ram Scissor Jacks
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
- Wrong item was ordered
Customer Reviews
Scissor Stabilizer Jacks w/ Handle - 18-3/4" Lift - 5,000 lbs - Qty 2 - TJSCHD-24
Average Customer Rating: 4.8 out of 5 stars (494 Customer Reviews)
These leveling scissor jacks with a 5,000-lb combined capacity will keep your RV level and stable. They adjust from 5" to 23-3/4" as your application requires. The bow-tie base steadies the jack on soft surfaces. Includes handle.by: Daniel P12/10/2020
Initial reaction is that this is a great, high-quality product. Only took me 1-1/2 hours to install two (both on the door-side) that had been damaged. Would've been even faster but I needed to modify the bracket that bolts onto the frame for the rear stabilizer. BTW, the two stabilizers had to be replaced because, as a first-time trailer owner, the dealership never told me to NEVER USE YOUR STABILIZERS TO LEVEL YOUR TRAILER! I hope to save at least one other person the hassle and expense of having to replace your stabilizers because you didn't know any better--I know now and will never forget! At least the new stabilizers are higher quality and really weren't difficult to switch out.
Comments
Still as happy with the product today as I was the day I installed them.
Daniel P - 12/22/2021by: David 03/23/2023
My 2nd order from Etrailer. Great quality, great price points, and fast shipping!
by: Lee 03/02/2023
Heavy duty product. Well made. Will be.a great addition to my travel trailer
by: Sharon07/11/2018
Product came when it was suppose to was not difficult to put on the frame You must realize I am a 74 yr old woman and did this by myself. The shocks were for the front of my trailer.
by: GaryS_NC08/07/2021
Got our RV out this past week and put the scissor jacks to work. I did not bolt the units to the undercarriage of our RV because it does not have significant ground clearance. Once parked, I placed them under our RV (24' Sprinter Class-C), and they worked great for some additional leveling and stability. Which stopped all rocking motion while moving around in the unit.
Comments
The scissor jacks still working great. I put a little white grease on the threads every now then just to keep them lubed.
GaryS_NC - 08/14/2022by: George 01/13/2023
Most excellent customer service!
by: William07/09/2018
Product arrived as promised, on time and in excellent condition. I am eighty years young and I have a tough time mounting my luggage rack to my Honda C RV trailer hitch receiver. Thus the need for the scissor stabilizer jacks. I mounted 1 each on the left and right side of the luggage rack, then with the ultra-fab stackable stabilizers, I use at the front under the rack tongue, the other under the back of the rack. Now, when I am ready to load or unload the rack I simply use my 14 volt drill motor with the ultra-fab speed socket power drill adapter to raise or lower the rack to the receiver height and just pull it off or push it into the receiver. Over-kill? Yes. But it serves my needs! The jack handle works great too, but that's work and I'm not used to it. All is well.
by: Michael 12/28/2022
Just as promised. Work excellent.
by: Lola08/11/2022
Great service and quality products, you have never let me down...
by: Michael10/28/2018
As always this product from etrailer was as good as expected. I have a 2015 Jayco 1209 SC Tent Trailer and the jacks that came with it folded like paper when I went to stabilize the trailer (I did not attempt to use them for leveling). I ordered these from etrailer and they came quickly and were perfect. They self tapped onto the frame of the trailer easily and when I used them they leveled the trailer out and stabilized it with such ease.
I would also like to note that even though I can buy trailer products in Canada, when I really need something I need to be a sure thing I always go to etrailer and I am yet to be disappointed.
by: James R09/27/2022
Fast shipping! Great folks.
by: Mike J06/13/2019
These have stabilized our trailer very nicely. We didn’t feel the need the install these they are freestanding.
by: Martha07/09/2021
We bought this "universal" set for our R-pod. We had to do a lot of retro-fitting to get them to work. They are probably too large for smaller trailers, but I think the quality is fine.
by: Dennis10/31/2017
Very pleased. I was replacing 2 stabilizing jacks on camper because feet on old ones rusted and I could not find just feet. Ended up getting 4 because of price and put order over free shipping threshold. Jacks arrived in a very timely manner. Put them on the day I received them. They work perfectly. Thanks. Dennis
by: James B07/31/2017
We installed these jacks on an older travel trailer that had been using only jack stands for stabilizing. These were simple to install and operate flawlessly.
by: Nicholas03/16/2021
They work just as you would expect. Why not 5 stars? It has to do with the crank handle offset. It is too big. If the jack is completely collapsed then the crank offset hits the ground. You have to extend the jacks a far amount before the offset does not hit the ground while turning.
by: Tom08/09/2016
Stablelizers are well constructed,these will add good stability for RV.Also,thanks for quick delivery
Comments
Stabllizers are very stout were easy to install and good price
Thomas C - 08/09/2017by: Jim 03/10/2017
great price shipping was fast
Thank You
Comments
the jacks work much better
James R - 03/10/2018by: David04/10/2018
Fast Delivery. Just what I ordered. Can't wait to install on my travel trailer to stop the rocking. I always use etrailer. The service is always Great and personal. You guys really care. Thanks.
by: Matthew 07/18/2020
Great product. It was shipped very fast exactly what I ordered. Used etrailer several times and will continue. Highly recommend
by: Todd11/05/2020
Still works great!
Comments
still works great, no problems
Todd - 11/07/2021by: Timothy 06/28/2021
Using to raise my VW and my Sprinter. Sturdy, solid tools. Good wide base for stability. Recommended
by: William04/27/2018
They worked out great. They arrived quickly and make stabilizing the trailer a breeze.
by: William04/04/2019
A good product. These jacks are a little over kill for my camper but the price was to good not to go with a heavier jack
by: D.H.07/28/2019
Used the jacks to stabilize my RV. They where easy to set up and use and the price was right.
25
493
Show More Reviews
See what our Experts say about this etrailer Camper Jacks
- Fit of TJSCHD-24 Stabilizer Jacks on 2016 Forest River Sunseeker 2450S MotorhomeThe etrailer.com # TJSCHD-24 Scissor Stabilizer Jacks are a universal-fit item, so it should fit just about anything. The jacks would bolt to the underside of the frame members of your motorhome. When closed, the jack is 26 inches long, so if you can find a suitable mounting point on the underside of the trailer frame that's 13 or more inches inboard of the side of the motorhome, the jack will install without extending past the side of the motorhome. I've linked you to a product description...
view full answer... - Measuring Frame Height for Leveling JacksMeasure from the ground to your trailer frame when it is level and you'll know what you would need to level your trailer. The scissor jacks part # TJSCHD-24 can provide up to 18-3/4 inches of lift so they would be a good option if your frame height is below that figure.
view full answer... - Replacement Scissor Jacks for 8,500 Pound TrailerScissor jacks are only intended to stabilize the trailer and therefore do not need to be rated for the entire weight of it. I recommend the # TJSCHD-24 jacks which are rated for a combined 5,000 pounds.
view full answer... - Leveling Scissor Jack Recommendation for a 24 ft Class C RVConsidering the weight of your 24 fot Class C RV these Leveling Scissor Jacks, part # TJSCHD-24, should work very well for you. As far as the stability of these jacks, like you said, you will want to have the wheels blocked so that if the jacks are down the trailer will not be able to roll. And for side to side stability, as long as the terrain is within reason you should not have to worry about side to side stability. These jacks are pretty heavy duty and should provide you with enough...
view full answer... - What Size is the Drive Nut on the Scissor Stabilizer Jacks # TJSCHD-24I went out to the warehouse to measure the drive nut on the Scissor Stabilizer Jacks # TJSCHD-24. From wrench flat to wrench flat it is 0.72 inches so just a hair under 3/4 inch and just a hair above 18mm.
view full answer... - Do Scissor Stabilizer Jacks TJSCHD-24 Mount to a Bolt Spacing of 3-1/2 Inches on CenterI did some checking and on scissor jacks # TJSCHD-24 the two closest slotted holes are 4 inches apart on center but since they are slotted you could mount them to a 3-1/2 inch bracket.
view full answer... - Dimensions of the Mounting Holes for the Scissor Stabilizer Jacks # TJSCHD-24All of the elongated mounting holes of the Scissor Stabilizer Jacks # TJSCHD-24 measure 5/8" long x 3/8" wide. The circular mounting holes have a 5/16" diameter (see attached picture). These jacks have a 5,000 lb combined weight lift capacity. Please note that these jacks are designed to only help stabilize your trailer. They should never be used to lift your trailer. I have attached a review video for you to check out as well.
view full answer...
- How To Properly Measure For A Rise And Drop On A TrailerThe receiver on your trailer generally can't be adjusted, however the hitch can be adjusted. In order to determine the correct hitch for your trailer, you're going to want to measure your hitch height. You can do this by, measuring from the ground to the top edge of the hitch receiver, then measure from the bottom edge of the trailer's coupler. You'll want to now, subtract the height of the receiver from the height of the coupler. If the measurement is negative, you need to drop the...
view full answer... - What Is The Weight Capacity Of Scissor Stabilizer Jack # TJSCHD-24With your toy hauler weighing 10,000 pounds and ripping off two each jack would have a weight capacity of 2,500 pounds. The Scissor Stabilizer Jacks w/ Handle # TJSCHD-24 would be the correct jacks for you. These leveling scissor jacks with a 5,000-pound combined capacity will keep your RV level and stable. They adjust from 5 inch to 23-3/4 inch as your application requires. If you have any further questions please feel free to reach back out to me anytime and I would be more than happy...
view full answer... - How to Determine if Scissor Jack Will Fit CamperThe Scissor Stabilizer Jack # TJSC-24, which also comes in a 2-pack # TJSCHD-24 and a 4-pack # TJSCHD-24-4, is a universal fit so you would need to double check our measurements to ensure they fit your travel trailer. When they are collapsed they measure 5" tall and then they can extend up to 23-3/4" tall to help stabilize your trailer. I am attaching a link to our returns policy that you can reference in regards to your question about a possible return.
view full answer...
- Can Middle Rod in Scissor Jack be ReplacedThe middle bolt that extends/retracts scissor jacks is unfortunately non-replaceable so you'll have to replace the jack(s) entirely. This is because if that bolt needs replacing then more times than not the whole jack is messed up and it's safer to replace the whole thing. Here are our etrailer-branded jacks in different quantities: Single - # TJSC-24 Pair - # TJSCHD-24 Set of 4 - # TJSCHD-24-4 These jacks are rated for 5,000 lbs and have a 18-3/4" lift. I've attached a review video for...
view full answer... - What is the Difference Between a Stabilizing Scissor Jack and a Leveling Scissor JackThere is no difference, that is just what the manufacturer decided to label it as. They both do the same job. Both Leveling Scissor Jacks, like part # JSC-24, and Stabilizing Scissor Jacks, like part # TJSCHD-24, are used to keep your RV level and stable. The only thing that you really need to keep an eye on is the weight capacity of each as these kinds of jacks are not meant to lift weight, just to hold it.
view full answer... - Fit of TJSC-24 Stabilizing Jack on Forest River Rockwood Mini Lite Travel TrailerThe # TJSC-24 scissor style stabilizing jack isn't an RV specific product, if it's 2500 lb capacity and 18-3/4 inch lift and the pictured mounting bolt pattern is compatible with your Rockwood Mini-Lite, it'll work perfectly for you. Please note, the handle is sold separately as part # TJSC-24-HD but it's included if you purchase the pair as part # TJSCHD-24 for the 4 jack set as part # TJSCHD-24-4. If you click the produced link, you can see a product demonstration video featuring the...
view full answer...
- How to Install the Scissor Stabilizer Jacks w/ Handle Part # TJSCHD-24-4The portion of the Scissor Stabilizer Jacks w/ Handle part # TJSCHD-24-4 that has the two rectangular tabs will need to be attached directly to the frame rail. The jacks cannot be installed the other way around. Once installed the hex head on the adjustment screw should face outward away from the trailer. These jack have a combined 10,000 lb weight capacity and offer up to 18-3/4" of lift.
view full answer... - Can Scissor Stabilizer Jacks # TJSCHD-24-4 Be Welded in Place?The Scissor Stabilizer Jacks w/ Handle # TJSCHD-24-4 can absolutely be welded on versus bolted on if you prefer. The frame of your fiberglass travel trailer will still be steel, so you can mount it to the frame in either manner. Welding will absolutely be a stronger hold, but many people choose to use hardware which is also an option.
view full answer... - Replacement Scissor Jacks Needed for Forest River Wolf PupI can definitely help you find some replacement scissor jacks for your Forest River Wolf Pup but since I don't know the dimensions of the holes in your trailer frame I wouldn't be able to recommend something right off the bat and know for sure that it would match up perfectly. Attached is a photo of the mounting hole dimensions and locations for the Scissor Stabilizer Jacks # TJSCHD-24-4 that you were looking at. If they don't match up with what you have, then let me know what your dimensions...
view full answer...
- Do Scissor Stabilizer Jacks Have to Attach to RV Frame to FunctionWithout bolting or welding down the scissor jacks # TJSCHD-24-4 they'd still do a decent job stabilizing the camper but considering how much more convenient they are when installed on the trailer I'd recommend you go that route. Would also prevent the jacks from slipping possibly.
view full answer... - Recommended Stabilizer Jacks for Award TrailerDepending on the overall GVWR of the trailer and clearance from the ground, I recommend using something like the Scissor Stabilizer Jacks w/ Handle - 18-3/4" Lift - 10,000 lbs - Qty 4 # TJSCHD-24-4, which are designed for trailers with a GVWR of 10000-lbs. These are a great, pocketbook friendly solution to replace or add stabilizer jacks for your trailer and have 18-3/4" of travel when fully extended. I've linked a review video of these for you to check out, but if your trailer needs longer...
view full answer... - Weight of Each Scissor Stabilizer Jack TJSCHD-24-4The individual weight is 10 lbs for one of the stabilizers in the Scissor Stabilizer Jacks w/ Handle - 18-3/4" Lift - 10,000 lbs - Qty 4 # TJSCHD-24-4.
view full answer... - Scissor Jack Stabilizers that Can be Used on 2016 Sunseeker 3170DSThe Scissor Jack Stabilizers part # TJSCHD-24-4 that you referenced would be a great set of 4 stabilizers that would work well on your 2016 Sunseeker 3170DS. These are easy to use and have 10,000 lbs of stabilizing capacity so they would work well on your RV.
view full answer... - Recommended Stabilizer Jacks For A 2004 Winnebago Vista With Limited Ground ClearanceFor your 2004 Winnebago Vista, I recommend taking a look at the: -Scissor Stabilizer Jacks w/ Handle # TJSCHD-24-4. These jacks have a combined weight rating of 10,000-lbs, or 2,500-lbs per jack, and are only 5" when collapsed so they'll fit into the narrow space you're needing them. Attached is a review video for you to check out as well.
view full answer... - Recommended Scissor Jacks for a 2018 Forest River Cherokee Travel Trailer GVWR 11,000 lbsIf you need to replace all of the scissor jacks on your 2018 Forest River Cherokee Travel Trailer then I recommend using the Scissor Stabilizer Jacks # TJSCHD-24-4. This is a pack of 4 scissor jacks that have a 2,500 lb weight rating each. Even though they aren't designed to lift your trailer, when used in conjunction with the A-Frame jack on your trailer you will have enough stabilization to comfortably move around your trailer. These jacks only sit 5" high when collapsed and they can...
view full answer... - Bolt Pattern for etrailer Leveling Scissor JackYes, I confirm that the Leveling Scissor Jack Set - 24" Lift - 10,000 lbs item # JSC-24 has the same bolt pattern as the etrailer Scissor Stabilizer Jacks w/ Handle - 18-3/4" Lift - 10,000 lbs item # TJSCHD-24-4. The item # JSC-24 are sold as a pair so you will need two sets.
view full answer... - Can Powerbuilt Unijack Bottle Jack Be Used As Stabilizer For 24-Ft Travel TrailerThe Powerbuilt Unijack Bottle Jack, part # ALL620471 is designed to be use when you need to work on a trailer or change a tire, but is not designed to be used as a stabilizer. If you need stabilizers for your travel trailer I recommend Scissor Stabilizer Jacks like part # TJSCHD-24. When collapsed these jacks are 5-inches tall, and when extended the height is 23-3/4 inches. These have a capacity of 2,500-lbs per jack.
view full answer...
Do you have a question about this Camper Jack?
Why etrailer.com?
At etrailer.com we guarantee:Real product know-how.
We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.Most detailed, accurate camper jack information available.
Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.Installations, made easy.
We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.Fast shipping.
Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.Personalized service for life.
We provide one-on-one, personalized service from the ordering process through the life of your product.Trusted since 1946.
We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.Returns Policy
Need to return an item? No problem. Please read our Returns Policy for more information.
Info for this part was:
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Edited by:
Lindsey S
Video Edited:
Dustin K
Installed by:
Cole B
Installed by:
Hayden R
Written by:
Amanda M
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.