Roadmaster Replacement Arms for Base Plate Kits

Ask the Experts about this Roadmaster Accessories and Parts

Replacement Arms for...

Replacement Roadmast...

Replacement Tow Arms...

Replacement Arms for...

How to Order Replace...

Attaching the Roadma...

Replacement Roadmast...

Fitting the Roadmast...

Does The Roadmaster ...

Adapter For Roadmast...

• Will Base Plate Drawbars from 2004 Jeep Wrangler Fit Baseplates on 1998 Jeep Cherokee Limited
  Most likely not. The arms are somewhat vehicle specific, usually they cannot be swapped back and forth. If you were to find they did fit, it would be purely by coincidence. If you need replacement arms, click the link below for part # RM-ARMS. Click the instruction link, which shows a form you'd need to fill out in order to get the correct replacement arms. Then, give us a call at 800-298-8924 with the information from the form.
  view full answer...
• Replacement Arms for Roadmaster Base Plate Kit of 2003 Suzuki XL-7
  Sounds like you have a set of Roadmaster base plates installed on your 2003 Suzuki XL-7 but are missing the removable arms. To get the replacement arms you'd need the part # RM-ARMS like you referenced.
  view full answer...
• Replacement Arms for Roadmaster Base Plate Kit of Jeep Wrangler
  That does look like a Roadmaster base plate kit installed on your 2013 Jeep Wrangler which means the correct part number you need to get the replacement arms is the # RM-ARMS.
  view full answer...
  
• Replacement Roadmaster Baseplate Arms For 2012 Jeep Wrangler Sahara
  Those are Roadmaster connections on your 2012 Jeep Wrangler Unlimited. Since they have used several different styles of arms over the years you will need to fill out their Baseplate Arm Order Form which I have linked below. You will then be able to place your order for the Roadmaster Replacement Arms # RM-ARMS through our website.
  view full answer...
  
• How To Order Replacement Arms For A Roadmaster Base Plate Kit For A 2016 Jeep Cherokee Trailhawk
  You can use # RM-ARMS to order a new set of arms for your base plate. Prior to ordering, you'll just need to fill out the form located at the bottom of the product page labeled "Installation Details". You can then give us a call at 1-800-298-8924 with the information on the form.
  view full answer...
• Part Number for Replacement Roadmaster Removable Arms
  The correct replacement removable arms for all Roadmaster base plate kits is the part # RM-ARMS that you referenced. You'll need to fill out the info in the attached install instructions link.
  view full answer...
• How To Get Replacement Arms/Tabs for Roadmaster Base Plate Kit
  In order to obtain replacement arms for a Roadmaster Base Plate Kit you'll need to order the Roadmaster Replacement Arms for Base Plate Kits part # RM-ARMS. Once purchased, you'll be asked to fill out a form which is attached below that has all the details needed to ensure you get the correct set of arms.
  view full answer...
• Can Replacement Arms be Ordered for Roadmaster Base Plate Kit
  Yes you can order replacement removable arms for your Roadmaster base plate kit with the part # RM-ARMS.
  view full answer...
• Replacement Removable Arms for Roadmaster Base Plate Kit
  To order replacement removable arms for all Roadmaster base plate kits you'd need the part # RM-ARMS.
  view full answer...
• Replacement Roadmaster Arms for Base Plate Kit
  We do offer replacement arms for the Roadmaster base plate kits we sell with the part # RM-ARMS.
  view full answer...
• Correct Roadmaster Replacement Arms for Base Plate Kits
  It sounds like you're actually looking for the base plate tabs and if that's the case we do offer replacements using the Roadmaster Replacement Arms for Base Plate Kits part # RM-ARMS.
  view full answer...
• Can Replacement Arms for Roadmaster Base Plate Kits be Ordered
  We offer a way to order replacement arms for the Roadmaster base plate kits with the part # RM-ARMS.
  view full answer...
• What is Typical Life of Roadmaster Tow Bar
  Tow bars don't last forever unfortunately. If yours has had 20 years of constant use it would be time to replace the whole thing. Roadmaster typically recommends their tow bars get replaced at 8-10 years and a max of 80k miles. The Roadmaster Falcon 2 part # RM-520 would be a great choice for a new tow bar that will be very easy to use. It's essentially the new and updated version of your current Falcon.
  view full answer...
• Removable Arms & Tow Bar For 2000 Jeep Wrangler
  The best tow bar we have for towing behind an RV is the Roadmaster Falcon 2 Tow Bar Motorhome Mount - 2" Hitch - 6,000 lbs # RM-520. This Roadmaster tow bar has a large hookup radius to ensure simple, secure hookup. What this means is that, even if your towed car is not perfectly aligned with your RV, you will still be able to make the necessary connections. To achieve this, the Falcon 2 has stainless steel, telescopic inner arms that adjust independently. Yes, we do have the Roadmaster...
  view full answer...
• Can Replacement Arms be Ordered for Roadmaster Base Plate Kit
  If you have a set of Roadmaster base plate kits on your 2015 Jeep Cherokee we can help you get setup with replacement removable arms with the # RM-ARMS. If you have a different brand let me know and I'll see what we can help find. If you are unsure send me a picture and I'll see if I can identify them.
  view full answer...
• Can I Purchase Replacement Removable Arms for the Roadmaster Base Plate Kit?
  You may purchase replacement drawbars for the Roadmaster EZ kits. Each base plate has its own specific draw bars that you must use. They are of a specific shape and design to be used on a specific vehicle so you cannot interchange them. For replacements for base plates you will need # RM-ARMS. Use the instructions, linked to the right, which is actually a form that needs to be filled out to ensure the new replacement arms will fit. If you need replacements for the 2005 Jeep Liberty, the...
  view full answer...
• Replacement Arms for Roadmaster EZ5 Base Plate Kit for 2015 Honda Fit
  Replacement arms are available for the Roadmaster EZ5 Base Plate Kit # RM-521569-5 for your 2015 Honda Fit with the part # RM-ARMS. When the original base plate brackets and arms were manufactured, they were made as one part. To be sure that the new arms fit just as perfectly, Roadmaster requires a bit more information on your original base plate brackets than just the part number. To order to new driver's and passenger side base plate arms, you will want to open the Instructions link...
  view full answer...
• Availability of Replacement Arms for Roadmaster Base Plate Kit
  We do have replacement arms available for your Roadmaster EZ5 Base Plate Kit # RM-521569-5 with part # RM-ARMS. When the original base plate brackets and arms are manufactured, they are made as one single part. So to be sure that the replacement arms fit perfectly, Roadmaster just needs a bit more information regarding your original base plate brackets. Prior to ordering, you will just click on the Installation Details at the bottom of the product page and fill out the bracket order form....
  view full answer...
• Replacement Arms for Roadmaster Base Plate Kits
  If your 2013 Honda CR-V has the Roadmaster EZ4 Base Plate Kit # RM-521567-4, you simply need to write in "521567-4" as the model number. It sounds like you have all the rest of the needed information on the form you need to fill out on the Roadmaster Replacement Arms for Base Plate Kits # RM-ARMS product page. If so, you can attempt to order them without the date code; just be certain all the other information is correct and you note that the date code was not visible. You can also contact...
  view full answer...
• Replacement Arms for Roadmaster Base Plate Kit and Adapter to Blue Ox Tow Bar
  You can order replacement arms for the Roadmaster base plate kits with the part # RM-ARMS. Then to convert to a Blue Ox tow bar you'd need the part # RM-032 and you'd be set.
  view full answer...
• How to Order Replacement Arms for Roadmaster Base Plate Kit
  If you were to lose one of the arms that came with the base plate kit part # RM-521423-4 (or any Roadmaster kit) you'd have to order the replacement arm kit part # RM-ARMS which actually is a request sent off to Roadmaster to have a custom arm made since they are all unique to the vehicles they fit. Due to some variances sometimes two different identical part number base plate kits won't allow the arms of the other to fit.
  view full answer...
• Does Roadmaster Sterling Tow Bar Come with Crossbar
  Sounds like you are looking for the crossbar that is used on the Roadmaster flat towing setups. The good news is that if you ordered a Roadmaster Sterling Tow Bar part # RM-576 it comes with this already. For the missing arms of your base plate kit you'd need just the part # RM-ARMS.
  view full answer...
• Can Replacement Base Plate Kit Arms be Ordered for Roadmaster Base Plate for 2007 Honda CR-V
  Yes, you can order just replacement Roadmaster base plate kit arms with part number # RM-ARMS for the kit you have on your 2007 Honda CR-V # RM-521559-4.
  view full answer...
• Part Number for Replacement Removable Arms for Roadmaster Base Plate Kit
  For replacement arms for a Roadmaster base plate kit you'd need the part # RM-ARMS.
  view full answer...

Do you have a question about this Accessories and Part?