Replacement Roadmaster Tow Bar Quick Disconnect Brackets - Car Side Only
(162 reviews)
Price: $50.37
In Stock
Replacement Roadmaster Tow Bar Quick Disconnect Brackets - Car Side Only
Item # RM-222
Retail:$93.09
Our Price: $50.37
You Save: 46%
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (162)
- Q & A (0)
- Videos (6)
- Photos
Roadmaster Accessories and Parts - RM-222
- Tow Bar
- Quick Disconnects
- Car Side
- Roadmaster
Replace the car-side quick-disconnect brackets for your Roadmaster tow bar.
Features:
- Replaces the car-side brackets of your quick-disconnect assembly for your Roadmaster tow bar
- Includes car-side components only: tow bar-side quick disconnects (RM-221) sold separately
- 2 Car-side quick disconnects
- 2 Backing plates
- (4) 1/2" Bolts
- (4) 1/2" Lockwashers
- (4) 1/2" Washers
- (4) 1/2" Nuts
- 2 Linch pins
222 Replacement Road Master Towbar Quick Disconnects - Car Side
Installation Details
Video of Replacement Roadmaster Tow Bar Quick Disconnect Brackets - Car Side Only
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Review of Roadmaster - Tow Bars - RM-222
Today we're gonna take a look at the Roadmaster Car Side Tow Bar Quick disconnects. Now these quick disconnects will allow for a nice quick, easy, one person connection and disconnection of your car mounted tow bar. These will attach to tow bar mounting base plates that are on your vehicle.The design of these quick disconnects are nice because they'll let you mount various towing accessories also, such as safety cables. Have the extra hole here that you can attach your safety cable to. The Guardian Rock Shield and the Tow Defender Deflector can also be attached to these disconnects.Now, this part number, this set is only includes the two car side components only. It does require the tow bar side quick disconnects to make the complete connection.
Those we do sell separately on our website. They're part number RM-221. I did happen to pull one just to show you what they look like. These would be for the tow bar side.And basically what they would do, is you just take your lynch pin out of here. You drop that through the hole down there over the pin in the top.
Take your lynch pin and slide it right back into place, and it'll hold it there. And then to remove it, just do the opposite. Very quick disconnecting and connect. But again, the tow bar side disconnects are sold separately.Now, everything on the table is included. It includes the two car side quick disconnects.
And they are a driver's side, they are marked, and a passenger side. The backing plates are included, four of the 1/2 inch bolts, four of the 1/2 inch washers, four of the 1/2 inch lock washers, and then four of the nuts, and then the two lynch pins which will hold the quick disconnects together. And it does come with a nice set of detailed instructions that will describe how this installs and how everything works.But that should do it for the review on the Roadmaster Car Side Tow Bar Quick Disconnects.
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
- Alternate product found
- Product did not meet expectations
- Did not arrive in time
Customer Reviews
Replacement Roadmaster Tow Bar Quick Disconnect Brackets - Car Side Only - RM-222
Average Customer Rating: 4.9 out of 5 stars (162 Customer Reviews)
Replace the car-side quick-disconnect brackets for your Roadmaster tow bar.by: Dave03/28/2017
Easy to bolt on the brackets. Great fit with my old tow bar. These were bolted to the new EZ4 brackets. The tow bar brackets were easy to mount to my Grand Cherokee.. The kit was missing the poly pop rivets but they are being sent to me.
by: Scott 08/24/2023
I purchased this assembly when I added an additional towed vehicle. Excellent quality and fast service.
by: Johnnie01/02/2018
I purchased parts for a tow bar that I use on my motor home to pull my Jeep The parts were as ordered and came faster than I had expected since it was around Christmas.i would recommend etrailer for all your needs
by: Darryl 07/20/2023
Great product, great service and quick shipment.
by: Ron D.02/23/2011
Nice & neat connection for the Roadmaster EZ baseplate to the MX crossbar and towbar. Our 2011 Chevy Malibu is now a Dingy! Thanks.
by: Randall 11/17/2022
Because of the slight mis-alignment of the system once installed, connecting and disconnecting the crossbar isn't as "quick" as it should be.
by: Lloyd 04/27/2023
Brackets were easy to install
by: Bob G10/18/2013
I ordered the car side quick release plates for a Stowmaster 5000 tow bar. Knowledgeable and helpful staff. Order shipped right away and was received right on the day they estimated. The product is as advertised and is the correct Roadmaster manufactures part. All the necessary hardware is included. I'm very happy with the service.
by: John S.06/12/2017
I purchased Roadmaster Quick-disconnects for my tow car....The product is exactly what I needed, but the most important part is the folks you get on the phone are ALWAYS know and understand their products, and are willing to assist you. My product arrived 40 hours later. We were able to leave the following day on our trip.
John S.
6/12/2018
The quick disconnects were installed about 2 hours after they were received - and everything is fine..I still remember the great service I received that day, and we were able to go trippin the following day with a car behind us... Ive purchased other items from you, tow bars on 2 different occasions, and the thing that impressed me equally as the service was the fact that you have knowledge of the products you sell..
by: Tom L.03/23/2017
I have used my Roadmaster Stowmaster tow bar for over 20 years now. It's not as fancy as many of the new tow bars out there, but it is very reliable. When you buy an new or different car, you have to install base plates and these quick disconnects bolt to the base plates. You also have to install wiring for the lights. The base plates are built with quality steel. After using them for so long with no issues I recommend these base plates, and the Stowmaster Tow bar and base plates as well.
by: Star G10/30/2012
Parts were exactly what I needed and wanted to complete my towing package. Already installed them and everything is perfect! I was amazed at the fast response and speedy shipping.
Thanks etrailer, for an excellent experience!
Star G.
4/30/2014
After one year, Im still more than pleased with the product. Works perfectly, andis being used regularly with no problems. Great product and great company to dealwith. Kudos etrailer!
by: Dan01/27/2015
Exactly what I needed to connect my roadmaster falcon towbar to my 1997 jeep wrangler. I didn't want to use roadmaster base plate brackets that are made to attach to frame below bumper, so I made some custom 3" angle iron pieces that attach to frame above bumper and bolted these brackets to them. Stout mounting and didn't lose any ground clearance.
Quick ship, great price (other sites as high as $70.00) and reasonable shipping charges.
by: Tina C08/07/2016
Just what I need to install my Road master Stow Master tow bar. I love how easy it was to install.
Tina C.
8/7/2017
Fantastic. Just the parts i needed. Great quality product.
by: Dirk Ostermiller09/09/2013
Hi Ho: Thanks, just what I needed. However, when someone orders a mount that requires the quick disconnect (which unknown to me is not included) you could tell them when the order is placed. This would avoid the delay and the additional postage.
Thanks again, Dirk Ostermiller
Dirk O.
9/10/2014
Hi Ho: I like the tow bar system just fine, and it works well for both of our towed cars. My only comment was that there could be a note in the base plate data saying that quick disconnect system is required and is sold separately.
by: RON S06/12/2014
I had purchased a Roadmaster Stowmaster tow bar and had purchased the base plate. The quick disconects were the only part missing to make them work together, and they did. Looking foreward to a summer on the road
by: Bob01/25/2018
I apologize at this time that I cannot give a full review on the product other than the fact that I did receive my stowmaster 5000 hitch receiver parts in a timely manner and I do thank your company for that. I have not had time to open the box yet as I am traveling and am not at my residence at this time. But again, thank you for your fast delivery of this product. I have used Stowmaster products for many years now and they are well built and strong and that is why I continue to use them.
Bob from Boise Idaho
by: GSV05/31/2016
Good service from eTrailer - price and timing were perfect.
The parts fit as described. Installation was not complicated, just took a while to complete. If you have average mechanical skills you can install the brackets. The pictures reall help.
by: Fred J03/30/2015
When I went to Camping World they advised that the vehicle I had a base plate was not made. A check with goggle got me to etrailer.com. A quick call and to items were on the way and arrived ahead ps the time stated. The item are Roadmaster and just what I was looking for. Etrailer will be the first place I check for needs next time.
by: Roger12/31/2021
Excellent customer service! Have ordered in the past with no problems at all. These items are just a set for the second car I tow. Been "flat towing' for about 15 years, using a Falcon 2 tow bar.
by: Joe C.09/13/2017
The item was delivered quickly and was exactly what I needed to connect the quick disconnect cross bar to my car.
Joe C.
9/13/2018
Great
by: Richard 02/07/2023
As usual another fast well packed shipment that arrived on time!
by: Paul02/13/2019
Manufacturer sent the tow bar quick disconnects w/o the backing plates and bolting materials. After contacting etrailer customer service, they jumped on it and quickly got the missing pieces shipped. This was not etrailer's oversight but they got it resolved promptly. Thanks etrailer!!
by: Walter O.06/04/2013
Had trouble finding this individual part on the Internet until coming to etrailer. Even Roadmaster website seems to offer only assemblies.
Etrailer's search tools, drawings and photos provided me with enough identification to be pretty sure I was ordering correctly.
Received the correct part a day early, complete with all attachment hardware and complete instructions. We are very happy to have discovered etrailer.
by: Don C.05/20/2013
Easy install and they work as they should....wish I'd have known when I ordered these that I should also have hotter the "RoadMaster Release Tool for Motor Home Mounted Tow Bars" Item RM-066.
25
162
Show More Reviews
See what our Experts say about this Roadmaster Accessories and Parts
- How to Install Car Side Quick Disconnects RM-222 on a 1998 Jeep WranglerThe car side quick disconnects are bolted directly to the base plates installed on the frame of your vehicle, and are then attached to the quick disconnects on the tow bar side. For the 1998 Jeep Wrangler, You would use base plate kit # 1424-1 if your 1998 Jeep Wrangler is a Rubicon, Unlimited, or double tube bumper model. If your vehicle has a U-channel bumper, you would use base plate kit # 1417-1. To give you a better understanding of how the car side quick disconnects and a towbar...
view full answer... - Are Mounting Parts Included with RoadMaster Quick Disconnects RM-222Yes, the flat plates, bolts, nuts and washers for mounting are included with the Quick Disconnects part # RM-222. I spoke with my contact at RoadMaster, and they confirmed that the following hardware is included: Pair of carside quick disconnects Pair of backing plates 4 1/2 inch bolts 4 1/2 inch lockwashers 4 1/2 inch washers 4 1/2 inch nuts 2 lynch pins
view full answer... - Need Roadmaster Tow Bar Quick Disconnects for A 1997 Jeep WranglerThe Roadmaster Tow Bar Quick Dissconnects you are looking for is part # RM-222. These are the quick dissconnects for the vehicle side of your flat tow system. If this is not the correct quick disconnect that you are looking for, feel free to contact us back.
view full answer... - Is Just Hardware of Roadmaster Tow Bar Quick Disconnects # RM-222Just the hardware of the # RM-222 isn't available but basically it's just the following components in Grade 5: (4) 1/2" Bolts (4) 1/2" Lockwashers (4) 1/2" Washers (4) 1/2" Nuts All very standard hardware you could get from a local hardware store.
view full answer... - Replacement Quick Disconnects for Roadmaster Falcon 2 Tow BarI'm sorry to hear of the issues you had with the lost parts for your Roadmaster Falcon 2 Tow Bar # RM-520 but we do have the parts you are looking for. What it sounds like is that the bag of nuts and bolts was the quick disconnect hardware, which you can replace with the Roadmaster Tow Bar Quick Disconnects # RM-222. This will come with the backing plates, bolts, nuts, and washers like in the accompanying photo, as well as two more quick disconnects. I've added a link to a video review...
view full answer...
- Replacement Quick Disconnects for Roadmaster Blackhawk Tow Bar # RM-422If you just need the towed vehicle side of the Quick Disconnects use # RM-222. To be clear these would go on the base plates of the vehicle that is being towed. The Blackhawk # RM-422 only uses this set.
view full answer... - What Sizes Are the Holes on the Roadmaster Tow Bar Quick Disconnects Part # RM-221Which holes are you referring to on the Roadmaster Tow Bar Quick Disconnects part # RM-221? The top hole that the stud slides into is 1" diameter but the two oblong holes on the front are 1" wide x 1/2" tall which you can see in the attached photo. Please let me know if you have any other questions. These tow bar disconnects are for the tow bar side only. If you need the vehicle side then you will want to use the Roadmaster Tow Bar Quick Disconnects part # RM-222.
view full answer...
- Recommendation for Quick Disconnects that Attach to Crossbar of Roadmaster StowmasterBased on what you are describing it sounds like you are looking for the quick disconnects # RM-222 which are the quick disconnects that attach to the car side and attach to the crossbar on your Stowmaster # RM-501.
view full answer... - How To Use a Roadmaster StowMaster All Terrain Tow Bar RM-502 on a 2019 Ford RangerYes, the Roadmaster Crossbar-Style Base Plate Kit part # RM-524459-4 will work with the Roadmaster StowMaster All Terrain Tow Bar part RM-502 on your 2019 Ford Ranger. You just need to make sure you still have the car side quick disconnects, the Roadmaster Tow Bar Quick Disconnects part # RM-222.
view full answer... - Replacement Base Bar for RoadMaster Falcon Tow Bar # RM-522The part you are looking for as a replacement piece for your RoadMaster Falcon Tow Bar # RM-522 is the RoadMaster Base Bar # RM-067. It attaches to the quick disconnects on your vehicle. If you also need the Quick Disconnects, they are part # RM-222.
view full answer... - Correct Driver Side for Roadmaster Tow Bar Quick DisconnectsThe Roadmaster Tow Bar Quick Disconnects part # RM-221 is for the tow bar side. If you need the driver side you'd want the Roadmaster Tow Bar Quick Disconnects part # RM-222. If you need both the tow bar and driver side then you'd want the Roadmaster Tow Bar Quick Disconnect Kit part # RM-201. Please note, if you meant driver as in left side then these are only sold in pairs.
view full answer... - Replacement Roadmaster Quick Disconnects for a Sterling All Terrain Tow BarIt looks like you have a car side in the picture. You can get a set of replacements using # RM-222. I would recommend replacing both so they wear the same. And for reference the tow bar side is # RM-221. The individual left and right sides are not available by themselves.
view full answer...
- Quick Disconnect Kit For Roadmaster Tow Bar It sounds like you are asking about the Roadmaster Quick Disconnects # RM-222. This lets you easily connect and disconnect your StowMaster, StowMaster All-Terrain, or Falcon All-Terrain tow bar. The tow bar side quick disconnects you may be looking for is part # RM-221. These can be purchased separately or they can be purchased as a kit. You would just need part # RM-201.
view full answer... - Base Plate Kit Needed for a 2011 Honda Fit SportYes, I can help. You will need the Roadmaster EZ Base Plate Kit, item # 521190-1, for your 2011 Honda Fit Sport. This bracket kit is designed to fit all models of the 2011 Honda Fit. Along with the bracket kit you will need a set of car side quick disconnects, item # RM-222, if you did not retain them from your 2003 Suzuki for the the tow bar. You will also need wiring for the Fit. I would recommend using the RoadMaster Tail Light Wiring Kit with Bulbs, item # RM-155, to keep the lighting...
view full answer... - What Part Number Are Roadmaster Car-Side Quick DisconnectsWe do have the Roadmaster car-side quick disconnects you are looking for, though the part number is a bit different than what you had mentioned. Instead, what you will need are the following: - Roadmaster Tow Bar Quick Disconnects - Car Side Only # RM-222 These do come with both the driver and passenger side so you're set.
view full answer... - Honda Tow Bracket For 2010 Honda FitI spoke with RoadMaster to find out if the tow bar brackets for the 2009 Honda Fit will work on your 2010 model. At this time the engineers are just beginning their research on the 2010 model and they will contact me when they have a definitive answer for your vehicle. Most likely the brackets will be the same but RoadMaster needs to check with Honda to be sure that there has not been any changes that effect the installation or performance of the tow brackets. The Roadmaster Falcon 5250...
view full answer... - Replacement Quick Disconnect For a Roadmaster Sterling Tow BarYour Roadmaster Sterling Tow Bar part # RM-576 should have came with the needed quick-disconnects. But if you happened to lose them you would want the part # RM-222 for the car side and/or part # 910021-00 for the tow bar side. The part # 910021-00 is the crossbar for the tow bar that is the other side of the quick-disconnect assembly.
view full answer... - What 2012 Ram 1500 Base Plate Kit Pairs with Roadmaster StowMaster Tow BarIn order to use the Roadmaster StowMaster Tow Bar # RM-501 with your 2012 Ram 1500 you need the Roadmaster Crossbar-Style Base Plate Kit # 52289-1. If you need to replace the Quick Disconnects for the vehicle side then you can do so with part # RM-222 as well. Attached are some review videos for you to check out. For a complete flat towing setup you will need a base plate kit, tow bar, safety cables, vehicle tow bar wiring, a supplemental braking system, and possibly a high-low adapter....
view full answer... - Will Stowmaster 5000 Tow Bar Fit Both a 1993 Saturn SL1 and 1998 Saturn Station WagonThe Roadmaster Stowmaster tow bar # RM-501 and other generations of the Stowmaster will fit the 1998 Saturn Wagon as long as it has the proper baseplates, # 52181-1. [If you wanted to be able to easily switch from one vehicle to the other I recommend adding some vehicle side quick disconnects, # RM-222.
view full answer... - Availability of Replacement Falcon 2 Tow Bar Quick Disconnect BracketsWe do offer the Quick Disconnect Brackets. We offer the car side brackets, part # RM-222. If you need both the car and tow bar side brackets, use part # RM-201. If you need the whole assembly, including both the car and the tow bar side brackets as well as the support bar, use part # 910021-00.
view full answer... - Quick Release Cross Bar Needed for a Roadmaster Falcon 2 Tow Bar Towing a 2007 Honda CRVThe RoadMaster Falcon 2 Tow Bar - 6,000 lbs, item # RM-520, is designed to be used with, included, Quick disconnects and a quick disconnect cross bar like the Roadmaster Quick Disconnect Tow Bar Base Assembly, item # 910021-00, that you mentioned. This replacement base assembly comes with the support bar, a pair of quick disconnects and the 2 pins that attach the tow bar to the cross bar. If you have the original cross bar with your Falcon 2, you should only need to use a set of car side...
view full answer... - Quick Disconnect Plates for a Roadmaster Base Plate On a 2020 Jeep Cherokee LatitudeThe Roadmaster Tow Bar Quick Disconnects # RM-222 will connect to the arms of the Roadmaster Crossbar-Style Base Plate Kit # RM-521452-4. If you are in search of the Arms # RM-ARMS there is a form linked under the installation instructions that will need to be filled out to get the exact arms for your base plate on your 2020 Jeep Cherokee Latitude.
view full answer... - Base Plates Recommendation For Flat-Towing 2015 Subaru Forester Behind MotorhomeIt sounds like you are familiar with flat-towing and you have nearly all of the equipment needed. Please keep in mind the base plates you ordered, part # RM-52923-4 are designed for your 2015 Subaru Forester if it is a non-Turbo engine and if it has a manual transmission. This base plate is compatible with all Roadmaster tow bars and Quick Disconnects. I cannot recommend flat-towing your Forester if it does not have a manual transmission. You will want to check your owner's manual or with...
view full answer... - Base Plate Kit Recommendation for 2015 Ram 1500 with Roadmaster Sterling Tow BarFor your 2015 Ram 1500 the Roadmaster Direct Connect base plate kit part # RM-52289-5 are a confirmed fit and also compatible with your Roadmaster Sterling tow bar part # RM-576.
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Expert Research:
Sarah L
Expert Research:
Patrick B
Expert Research:
Michael H
Expert Research:
Jeff D
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Adam R
Expert Research:
Jeffrey L
Video by:
Andrew K
Video by:
Kathleen M
Video by:
Zach D
Video Edited:
Joshua S
Video Edited:
Jacob T
Video Edited:
Chris R
Updated by:
Laura H
Updated by:
Wilson B
Updated by:
Hannah L
Updated by:
Isabelle B
Updated by:
Amanda K
Test Fit:
Randy B
Test Fit:
Shane H
Test Fit:
Robert C
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Bob G.
10/19/2014
The product has been great. So nice to have the base plate set up with the removable hitch connections. The Stowmaster system is such an nice improvement over our old fixed tow bar. I did the base plate installation myself. The directions were complete and easy to follow. Greta product. Very happy with it.