1. Accessories and Parts
  2. Redline
  3. Trailer Tires and Wheels
  4. Trailer Hubs and Drums
  5. Boat Trailer Wheels
  6. Wheel Studs
Wheel Stud - Drive In 1/2" x 2-1/2" (Qty. 1)

Wheel Stud - Drive In 1/2" x 2-1/2" (Qty. 1)

Item # 165995
lowest price pledge
Our Price: $6.81
Accessories and Parts
Orders above $99 qualify for Free Shipping
Shipping Weight: 0.16 lbs
Quantity: 
In Stock
Accessories and Parts 165995 - Wheel Studs - Redline
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Videos

Call 800-298-8924 to order Redline accessories and parts part number 165995 or order online at etrailer.com. Free expert support on all Redline products. Guaranteed Lowest Price and Fastest Shipping for Wheel Stud - Drive In 1/2" x 2-1/2" (Qty. 1). Accessories and Parts reviews from real customers.
  • All Info
  • Reviews (23)
  • Q & A (14)
  • Videos (1)
  • Photos
  • Why etrailer?

Redline Accessories and Parts - 165995

  • Trailer Tires and Wheels
  • Trailer Hubs and Drums
  • Boat Trailer Wheels
  • Wheel Studs
  • Redline
  • Drive-In Stud
  • 1/2 Inch Diameter
  • 2-5/8 Inch Long


Features:

  • Replacement Trailer Drive-In Wheel Stud
  • 20 threads per inch


Product detail
Thread Diameter (A) Stud Length (B) Spline Length (C) Base Length (D) Spline Diameter (E)
1/2" 2-1/2" .68 1.38 .54


165995 Wheel Stud - Drive In 1/2" x 2-1/2" (Qty. 1)





Video of Wheel Stud - Drive In 1/2" x 2-1/2" (Qty. 1)

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Redline Tires and Wheels 165995 Review

Speaker 1: Today we're going to take a look at the 1/2 inch by 2 1/2 inch Drive In Wheel Stud for a quantity of one. Now this is a replacement trailer drive in wheel stud. It is designed to be pressed into your wheel hub assembly. Right here the neural portion is what would be pressed in. Then this threaded portion is what your lug nut would screw on to. It is a 1/2 inch diameter.

Total length, which is measured from the top of that end cap here to the edge of the stub is right at 2 1/2 inches. It is a 1/2 inch by 20 thread size. Basically, if you have your standard 1/2 inch lug nut, you can see that that's what would screw on to this stud. Just like that. Then hold your wheel on to the hub.

But that should do it for the review on the 1/2 inch by 2 1/2 inch Drive In Wheel Stud for a quantity of one.


Customer Reviews

Wheel Stud - Drive In 1/2" x 2-1/2" (Qty. 1) - 165995

Average Customer Rating:  5.0 out of 5 stars   (23 Customer Reviews)


- 165995
by:

I ordered this because I needed a fifth longer lug to go with the RG03-080 set I ordered. These lugs are identical. 602333



- 165995
by:

Had what I needed and delivered expediently. I could not find it locally even in the largest and heavy equipment parts outlet. 658950



- 165995
by:

883665



- 165995
by:

Was the correct product for the brake hub. What is really great is to talk to a person. So many web sites do not let you order by phone. As a retiree a lot of us are not internet smart and do not like to put our info on the internet. Thank you Noah for giving us a faster phone number to reach you at in case we had any questions or a problem. 881814



- 165995
by:

after a long search i found the parts that i needed at etrailer, the staff member jenny b was great and helped me until we found what i needed,parts arrived and i installed, all working great, Thanks 870927



- 165995
by:

857311



- 165995
by:

Good quality product at a good price. Press Fit perfectly in the holes. 816259



- 165995
by:

Price and product good 798077



- 165995
by:

Most excellent customer service! We had a critical job that was under a huge time constraint where we learned at the last minute that the wheel studs were too short. Order a large quantity (150pcs) of this extended stud on Wednesday afternoon and the full order arrived at out facility by 11:00am Thursday morning! Parts looked great and will save us big time! Thank you Adam E. and etrailer.com for your amazing service! 707835



- 165995
by:

Parts got here quick and were packaged nicely 672582



- 165995
by:

Only place that I knew the product was the exact one I needed... Like new after installing. 646871



- 165995
by:

Always dependable products.well made,no surprises. 581437



- 165995
by:

Fantastic support and quick shipper! I'll be back! 573232



- 165995
by:

Got the part quick, great service 519517



- 165995
by:

Just as shown on Website and arrived a LOT faster than I thought it would with standard shipping. Very nice 385827



- 165995
by:

I ordered wheel studs, shackle straps, and nuts to replace rusty components on my trailer. These are additional parts after ordering new trailer springs from etrailer earlier. Everything fit up great, and now both my axles support the trailer. Yay! Thanks to Etrailer for having all this stuff for quick delivery, and it saves a ton over the local shop. 329229



- 165995
by:

EXACTLY WHAT I NEEDED!! 311708



- 165995
by:

Fast and easy, I'll be back next time I need parts for my trailers 311172



- 165995
by:

everything was good 297215



- 165995
by:

Great service fast delivery thanks. 212501



- 165995
by:

Great product and fast delivery. It was a perfect match to the old one and went right in place with no problem. 183499



- 165995
by:

Wheel studs were delivered as advertised, however they were not an exact fit in my application; the spline length was just a little too long and the head diameter was a little too wide. With a short spin on the grinding wheel both were fixed and they're now installed and working perfectly. I tired to source these studs from local auto parts stores and had absolutely no luck at all. Overall, etrailer.com website provided numerous options with varying stud lengths and thread patterns which ultimately saved they day! 131404



- 165995
by:

Just what I needed, bought a few spares 68265


25
25

Ask the Experts about this Redline Accessories and Parts

  • How to Determine Wheel Stud Replacement for Boat Trailer Hub H-1377
    Based on my research it looks like you have a hub for a 3,500 lb axle, though we do not have any exact reference for an H-1377 hub to go off of. You only need to know whether your hub uses screw-in or drive-in studs as well as the length of stud you need. This is going to require you to remove one of your wheel studs and if they are drive-in they will have a head on them like the 1/2" x 2-1/2" Wheel Stud # 165995. A screw-in like the 1/2" x 2" Wheel Stud # 25-51 will be completely threaded. I...
    view full answer...
  • Are All 1/2 Inch Lug Studs Fine Thread 20 Threads Per Inch
    The majority of drive-in lug studs like part # 165995 use a fine thread but only a 1/2"-20 tpi (threads per inch), not a 1/2"-32 tpi. I am not aware of any lug nuts we offer that will fit a 1/2"-32 tpi but what you can do is measure the bolt you have now to see if there are in fact 32 threads per inch as opposed to the much more common count of 20 threads per inch. If you do have 1/2"-32 tpi bolts then you will need to go to the hardware store in order to find a compatible nut but if you...
    view full answer...
  • What Grade are Redline Wheel Studs # 165995
    Yes, the six radial lines or markings on the top of the head indicate that the Drive In Wheel Stud 1/2" x 2-1/2", # 165995 is in fact a grade 8.
    view full answer...
  • What Size Hole to Drill for Installing Redline Replacement Drive-In Trailer Wheel Stud # 165995
    My contact at Redline advised that their Replacement Drive-In Trailer Wheel Stud, part # 165995, which has a spline diameter of 0.54 inches, can be driven into a hole diameter from 0.50 inches to 0.52 inches. My contact at Dexter advised that if you are able to hammer the old stud out of the hub (from the front, opposite to how it was installed) without deforming the hole or changing its size, then the replacement should fit properly without any need to drill the hub. If needed a...
    view full answer...
  • Torque Rating for Trailer Hub Wheel Studs for 1/2 Inch Lug Nuts
    Wheel stud # 165995 is a drive-in wheel stud meaning it gets driven into a hub with a mallet or similar tool. Since it is a 1/2 inch the lug nuts, when tightened, 1/2 inch lug nuts should be at 75 to 85 foot pounds on 8 inch to 14 inch steel or aluminum wheels, 90 to 120 foot pounds for 15 to 16 inch steel wheels, and 90 to 100 foot pounds on 15 or 16 inch aluminum wheels.
    view full answer...
  • What Would Cause Threads of Wheel Stud to Be Unusable After Using Washer Method to Install Them
    It sounds like you are using a lug nut on the wheel stud # 165995 that has either damaged threads or a similar but different thread size which is destroying the stud. My brother had this happen to him once with a car and it took him a while to realize since the threads were pretty close. The size of the lug nuts you'd need to use is 1/2 inch diameter with 20 threads per inch like the # 12CLN.
    view full answer...
  • Replacement Stud Recommendation for Dexter 6k Rated Trailer Hubs
    For Dexter 6k rated hubs like the part # 8-201-9UC3-EZ you will need to use stud # 165995. This drive-in stud is 2-1/2 inches long.
    view full answer...
  • Replacement Drive-In Wheel Stud for Hub and Drum Assembly for 5K/6K E-Z Lube Trailer Axles
    For a replacement drive-in wheel stud for hub and drum assembly # 8-201-9UC3-EZ you will need to use stud # 165995. This drive-in stud is 2-1/2 inches long.
    view full answer...
  • Longer Wheel Studs Needed for Dexter 2,200 Lb Trailer Hub
    In order to install longer lug studs on the Trailer Hub Assembly part # 8-258-50UC1-EZ you will need to use the Drive In Wheel Stud part # 165995 which are 1/2" longer. These new studs should then allow you to retain the wheel spacers therefore provide clearance from the fender. In order to install the new lug studs, we first need to remove the old ones which can be done by carefully hitting the top of the stud with a hammer. Then once the old studs are removed we can install the new ones....
    view full answer...
  • Stud Installation on Dexter Axle Trailer Hub Assembly # AKIHUB-440-2-1K
    I contacted our representative at Axle Tek and he informed me that the studs on the Trailer Hub Assembly, part # AKIHUB-440-2-1K are Drive In Studs, so they are either pressed or hammered in. This hub assembly will work with your 2000 lb Axles, 4 on 4 bolt pattern, with L44643 Bearings. I informed him that you are planning to remove the studs and replace them with longer studs. He recommended Wheel Stud, part # 165995, which is about a 1/2 inch longer than the studs on part # AKIHUB-440-2-1K. To...
    view full answer...
  • Replacement Studs for a Trailer Hub and Drum Assembly # 42866UC3-EZ
    The replacement wheel stud you would need for your Trailer Hub & Drum Assembly # 42866UC3-EZ would be a Wheel Stud # 165995. Also, when you install the wheels onto your hubs you will want to torque them down to spec and then after 50-100 miles you will want to re-tighten them to the specified torque rating to prevent having the studs break in the future.
    view full answer...
  • Replacement Wheel Studs for Hub 22834
    According to the information that I was able to obtain for hub 22834, it more than likely uses Drive In Wheel Stud, # 165995, which measures 1/2 inch x 2-1/2 inch. The absolute best way to determine the correct replacement wheel studs for your hub would be to hammer out one of the existing studs and take a measurement. I have included a link to all of the wheel studs that we offer for your convenience.
    view full answer...
  • Replacement Wheel Studs for the Trailer Hub and Drum Assembly # 42656
    The wheel studs of the Trailer Hub and Drum Assembly # 42656 are 1/2 inch diameter. I checked with Dexter and the recommended replacement studs for this hub are the part # 165995.
    view full answer...
  • How to Attach Spare Wheel/Tire to the Curt Trailer Hitch Mounted Spare Tire Carrier 31006
    If you are using the Aluminum Jaguar Trailer Wheel part # LHSJ311G then your trailer will have 1/2-20" lug studs therefore, in order to secure your spare wheel/tire to the Curt Trailer Hitch Mounted Spare Tire Carrier part # C31006 I recommend using multiples of the Wheel Stud part # 165995 and the Chrome Trailer Wheel Lug Nut part # 12CLN-L. The lip on the lug stud should be sufficient to attach to the plate so additional washers will not be needed. If you were ever to break a lug stud...
    view full answer...




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality accessories and parts for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate accessories and part information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Installed by:
Jeff D
Updated by:
Adele M
Updated by:
Laura H

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.