Replacement Drive-In Wheel Stud for Hub and Drum Assembly for 5K/6K E-Z Lube Trailer Axles
Updated 04/21/2014 | Published 04/19/2014
Products Featured in This Question
Question:
can you tell me which wheel studs this brake drum takes? We ordered 4 of these drums for our dump trailer last year and we had a wheel come loose and damaged the threads on the studs. thanks for your help
asked by: Wayne
0
Expert Reply:
For a replacement drive-in wheel stud for hub and drum assembly # 8-201-9UC3-EZ you will need to use stud # 165995. This drive-in stud is 2-1/2 inches long.
expert reply by:
Michael H
0
Product Page this Question was Asked From
Dexter Trailer Hub and Drum Assembly - 5,200-lb and 6,000-lb Axles - 6 on 5-1/2 - Pre Greased
- Trailer Hubs and Drums
- Hub with Drum
- Pre-Greased
- 25580 / 15123
- Standard Grade
- For 5200 lbs Axles
- For 6000 lbs Axles
- 1/2 Inch Stud
- 6 on 5-1/2 Inch
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- Dexter
more information >
Continue Researching
- Q&A: What Is The Difference Between Dexter Hub/Drum 8-201-5UC3-EZ And 8-201-9UC3-EZ
- Q&A: Should I Replace Trailer Tires that are 5 Years Old? ST225/75R 15E
- Q&A: Looking For New Brakes And Hubs For Trailer With Hub Number 8-201
- Q&A: Replacement Bearing For Timken 15123 Trailer Hub Bearing
- Q&A: Can a Hub with Outer Bearing 15123 and LM67048 Both Fit Same Spindle
- Q&A: Replacement Brake Assemblies for Dexter 023-358-00 Trailer Brakes
- Article: How to Tell the Weight Rating of a Trailer Axle
- Q&A: What is Difference Between Dexter Hubs # # 8-201-9UC3-EZ and # 8-201-5UC3-EZ
- Article: Trailer Wiring Diagrams
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Most Popular Wheel Bearings
- Article: Testing Trailer Brake Magnets for Proper Function