Replacement Drive-In Trailer Hub Wheel Stud - 5/8"-18 x 2-3/4" Long - Quantity 1
(9 reviews)
Price: $10.99
In Stock
Replacement Drive-In Trailer Hub Wheel Stud - 5/8"-18 x 2-3/4" Long - Quantity 1
Item # 7-232
Our Price: $10.99
Orders above $99 qualify for Free Shipping
In Stock
Need help with installation?
Locate installers near me- All Info
- Reviews (9)
- Q & A (0)
- Videos (1)
- Photos
- Why etrailer?
Dexter Accessories and Parts - 7-232
- Boat Trailer Wheels
- Trailer Hubs and Drums
- Trailer Tires and Wheels
- Wheel Studs
- Drive-In Stud
- Dexter
- 5/8 Inch Diameter
- 2-3/4 Inch Long
Replaces 1 drive-in wheel stud for your trailer hub. Bolt dimensions: 5/8"-18 x 2-3/4" long.
Features:
- Replaces a drive-in wheel stud for your trailer hub
- Quantity: 1 wheel stud
| A | B | C | D | E |
|---|---|---|---|---|
| 5/8"-18 | 2-3/4" | 0.31" | 1.03" | 0.69" |
7-232 Replacement Drive-In Trailer Hub Wheel Stud - 5/8"-18 x 2-3/4" Long - Quantity 1
Video of Replacement Drive-In Trailer Hub Wheel Stud - 5/8"-18 x 2-3/4" Long - Quantity 1
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Review of Dexter Axle - Tires and Wheels,Trailer Hubs and Drums,Boat Trailer Wheels - 7-232
Today we're going to take a look at the replacement drive in trailer hub wheel stud. This is going to be a 5/8th 18 x 2-3/4 of an inch long bolt, and it comes as a quantity of one. This is going to allow you to replace a stud on your trailer hub wheel in case that became broken or the threads got mashed or whatever happened. This is going to give you that replacement to get you hub back rolling down the road.Now as far as our dimensions, again, this is going to be a 2-2/4 of an inch long bolt. That's measuring from the end of the bolt to just under the head and then diameter there is going to be 5/8th with an 18-count thread pitch. We'll also have our other dimensions.
We'll have from the bend there to the bottom of the head, that's going to be just over an inch. The teeth that are going to be the drive in portion or the little fins that keep in place, that's going to measure 0.31 inches or about 3/8th. And the diameter at the head of the bolt, that is going to be 0.69 inch.And that's going to do it for our look at the Dexter replacement drive in trailer hub wheel stud.
Customer Satisfaction Score:
94% were satisfied with this product
6% of customers were not satisfied
- Wrong item was ordered
- etrailer mistake
Customer Reviews
Replacement Drive-In Trailer Hub Wheel Stud - 5/8"-18 x 2-3/4" Long - Quantity 1 - 7-232
Average Customer Rating: 4.8 out of 5 stars (9 Customer Reviews)
Replaces 1 drive-in wheel stud for your trailer hub. Bolt dimensions: 5/8"-18 x 2-3/4" long.by: Jim 11/22/2022
Any H. Was very helpful and she did great perfect fit
by: Gary 08/26/2022
excellent quality of product and fast on shipping.
by: David 11/10/2021
Hard to find wheel studs were delivered in a timely manner, got my trailer back on the road.
by: Thomas04/01/2022
This item was not the size I needed so it was not used.
Comments
I have sent this over to our customer service team for them to better assist you.
-- 
Katrina B - 04/11/2022by: Mark 12/09/2021
fast customer service and shipping
by: L.07/28/2021
Carol was very helpful!
by: Ryan 12/15/2022
by: Jeffrey 09/26/2021
by: Valerie 01/28/2021
9
9
See what our Experts say about this Dexter Accessories and Parts
- Replacement 2-3/4" Wheel Studs For A 2011 Heartland North Trail Fifth WheelA 2-3/4" wheel stud for your 2011 Heartland North Trail fifth wheel is the Replacement Drive-In Trailer Hub Wheel Stud - 5/8"-18 x 2-3/4" Long - Quantity 1 Item # 7-232.
view full answer... - How To Find Correct Replacement Dexter Drive-In Wheel StudIn order to choose the correct replacement wheel stud you'll need to take some very specific measurements of the spline and shaft. These measurements are listed on each product page for the replacement stud such as the Replacement Drive-In Trailer Hub Wheel Stud part # 7-232.
view full answer...
- Can 9/16" Trailer Hub Studs be Changed to 5/8" StudsIt may be possible to change your studs from 9/16" to 5/8" so long as the studs are drive-in, and the length and knurl/spline diameter needs to be the same. For example, if your studs are 2-3/4" long and have a 0.69" diameter spline you can use the Replacement Drive-In Trailer Hub Wheel Stud - 5/8"-18 x 2-3/4" Long # 7-232. So you do need to have some very specific measurements, otherwise you will need to change your hub to get that size wheel stud. I have added a link below to our entire...
view full answer... - Replacement Drive-In Wheel Stud RecommendationI believe I was able to find what you're needing, however they are slightly different. Take a look at the: -Replacement Drive-In Trailer Hub Wheel Stud # 7-232. This replacement wheel stud measures 2.75" long, has a base length of 1.03", a knurl of 31", and a spline diameter of .69". Attached is a product review video for you to check out as well.
view full answer... - Availability of Longer Replacement Wheel Studs for Hub on Dexter 8,000 Pound AxleThe answer to your question depends on the diameter and current length of your wheel studs on your hubs. I also do not know how much longer you want them to be. For example, if you have 5/8" diameter wheel studs that are 2" long you could use the # 7-232 which is 2-3/4" long. If you have 1/2" you could use the # 7-262 that are 2-11/16" long. For 9/16" you could use the # 7-257 which are 2-1/2" long. I have attached a link to all of our available wheel studs that can be filtered by length...
view full answer... - Replacement Studs for Trailer Hub # AH60880FCOMPFor replacement wheel studs for the Trailer Hub Assembly # AH60880FCOMP that you referenced you would want the # 7-232 and you'd be set. These are 2-3/4 inches long, 5/8 inch diameter and have a spline length of .31 inch.
view full answer... - Matching Lug Nuts to Use with Wheel Stud # RG03-140We have the part # RG03-140 you are looking for and then for lug nuts you'd want the # 6-109 and you'd be set.
view full answer... - How to Determine Correct Replacement Bearings for TrailerWe can help you find the correct bearings on your trailer, which is pretty easy and only takes a bit of measuring. So in order to find the correct bearings you will need to take apart your hub assembly and look at the bearings themselves; wipe away the grease and you should be able to see the part number stamped directly on them. If you are unable to find them, you need to use Digital Caliper # 301-17068 and measure your spindle to the thousandths of an inch where the bearings ride. You...
view full answer...
- Replacement Wheel Studs for AL-KO Hayes 09080587 10K Axle HubFrom my research, it looks like your 10K Axle AL-KO Hayes hub #09080587 uses six 5/8 x 2-3/4 inch wheel studs for single and flat face wheels. The correct replacement is our Trailer Hub Wheel Stud, Screw-In # 7-232. Below are some other direct replacement parts for this hub assembly: Outer Bearing # 28580 Outer Race # 28521 Inner Bearing # 25580 Inner Race # 25520 Oil Cap Kit # K71-859-00
view full answer... - Recommended Replacements for an Older Trailer HubHaving an inner bearing # LM48548 and outer bearing # LM11949 is definitely going to make things a bit difficult. I went through all the hub options we have available, but none will match your set up, unfortunately. That being said, we should be able to get replacement lugs for you. This will depend on the size needed, but the # 7-122 will be 2 inches long with a 1/2 diameter, the # K916WB25 will be 2 1/2 inches long with a 9/16 diameter, and the # 7-232 will be 2 3/4 inches long with...
view full answer...
Do you have a question about this Accessories and Part?
Why etrailer.com?
At etrailer.com we guarantee:Real product know-how.
We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.Most detailed, accurate accessories and part information available.
Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.Installations, made easy.
We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.Fast shipping.
Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.Personalized service for life.
We provide one-on-one, personalized service from the ordering process through the life of your product.Trusted since 1946.
We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.Returns Policy
Need to return an item? No problem. Please read our Returns Policy for more information.
Info for this part was:
Edited by:
Lindsey S
Installed by:
Kathleen M
Updated by:
Wilson B
Written by:
Alex H
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.