Looking For Wheel Stuf 1/2" Diameter 2-1/2" Long With 0.535" Knurl Diameter
Updated 10/30/2025 | Published 02/08/2025 >
Question:
Im looking for a m20-1/2inch 2-1/2inch long wheel stud with a .535inch knurl. And a head size 3/4inch
asked by: Dallon P
Expert Reply:
Hey Dallon, thanks for reaching out. Would a 0.54" knurl diameter work for you? Because we do have one wheel stud, part # 165995, that matches your specs. It is 2-1/2" long and 1/2" diameter. The knurl is listed at 0.54" so I imagine that difference of a few hundredths will not be an issue and this will be your best option for a replacement wheel stud. We have nothing with a knurl exactly 0.535 so this is the closest option.
Reply below and let me know if there is anything else I can do to help.
Product Page this Question was Asked From
Wheel Stud - Drive In 1/2" x 2-1/2" (Qty. 1)
- Accessories and Parts
- Boat Trailer Wheels
- Trailer Hubs and Drums
- Trailer Tires and Wheels
- Wheel Studs
- 1/2 Inch Diameter
- Drive-In Stud
- 2-5/8 Inch Long
- Redline
more information >
Continue Researching
- Q&A: Replacement Foot Plate for a Lippert Jack 359278
- Q&A: Replacement Trailer Wheel Studs With 1/2 inch Diameter
- Q&A: Difference Between Kenda Karrier K03 and KR35 Trailer Tires
- Q&A: How To Determine the Correct Size Lug Nuts For a Trailer
- Q&A: What is the Warranty on the Blue Ox Patriot Portable Flat Tow Brake System?
- Q&A: Wheel Stud that is Longer Than K12WB2 with Same Diameter
- Q&A: Difference Between Kenda Karrier ST175/80R13 KR35 and KR03 Tire
- Article: How to Bleed Your Trailer Surge Brakes
- Article: Ram Trailer Tow Prep Package
- Article: Trailer Lighting Requirements
- Article: How to Measure for Motorhome Steps
- Article: What are the Common Types of Propane Fittings Used on RVs?
- Article: Rust Prevention
- Article: Double-Eye Trailer Suspension System Review



Jesse M.
10/30/2025
Hey Dallon, did the wheel stud with the 0.54 knurl end up fitting your setup? Knowing how that slight size difference worked out could really help others looking for a similar replacement.