Wheel Stud Replacement for 5200 lb Trailer Axle
Published 03/30/2022
Question:
Hello, Looking for a wheel stud from a 12inch x 2inch electric drum brake, 8x6.5inch pattern, 5200 pound axle. 1/2-20 thread, 2.8inch long 2.5inch would work, 0.56inch spline diameter, 0.68inch spline length, stamped U 144inch on head Thanks
asked by: Lee T
0
Expert Reply:
Based on the dimensions you said you needed the Wheel Stud # 165995 would be exactly what you'd need.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
Wheel Stud - Drive In 1/2" x 2-1/2" (Qty. 1)
- Accessories and Parts
- Boat Trailer Wheels
- Trailer Hubs and Drums
- Trailer Tires and Wheels
- Wheel Studs
- 1/2 Inch Diameter
- Drive-In Stud
- 2-5/8 Inch Long
- Redline
more information >
Continue Researching
- Q&A: Replacement Trailer Wheel Studs With 1/2 inch Diameter
- Q&A: Difference Between Kenda Karrier K03 and KR35 Trailer Tires
- Q&A: Wheel Stud that is Longer Than K12WB2 with Same Diameter
- Q&A: How Long is Warranty on Cummins Onan Quiet Series Onboard RV Generator
- Q&A: Can 1/2 Inch Wheel Stud With .54 Inch Knurl Fit Hub With .55 Inch Knurl Stud
- Q&A: Recommended Spacing Between Trailer Tire and Inner Fender
- Q&A: Replacement Trailer Leaf Spring for 2,700 lb Axle 26-1/4 inch In Length
- Article: How to Bleed Your Trailer Surge Brakes
- Article: Ram Trailer Tow Prep Package
- Article: Trailer Lighting Requirements
- Article: Rust Prevention
- Article: How to Measure for Motorhome Steps
- Article: Double-Eye Trailer Suspension System Review
- Article: What are the Common Types of Propane Fittings Used on RVs?