DeeMaxx Drive-In Wheel Stud - 1/2" Diameter x 1-11/16" Long
(4 reviews)
Price: $3.52
In Stock
DeeMaxx
Add to cart
DeeMaxx Drive-In Wheel Stud - 1/2" Diameter x 1-11/16" Long
Part Number: DE45GR
In Stock
$3.52
Need help with installation?
Locate installers near me- All Info
- Reviews (4)
- Q & A (0)
- Videos (1)
- Photos
DeeMaxx Accessories and Parts - DE45GR
- Boat Trailer Wheels
- Trailer Hubs and Drums
- Trailer Tires and Wheels
- Wheel Studs
- Drive-In Stud
- DeeMaxx
- 1/2 Inch Diameter
Grade 8 wheel stud fits DeeMaxx 10" and 12" hub-and-rotor assemblies, but its standard 1/2"-20 thread size will work on other hub assemblies just as well.
Features:
- Replaces 1 drive-in wheel stud for your trailer's hub assembly
- Fits DeeMaxx 10" and 12" integral hub-and-rotor assemblies
- Resists corrosion thanks to zinc finish
- Performs well even in the most demanding environments
- Grade 8 bolt is fit for automotive applications
- Ultra-high tensile strength
Specs:
- Stud length: 1-11/16"
- Thread size: 1/2"-20
- Knurl grade: 0.545"
RTR/HUB-102-120-STUD Dee Maxx Press-In Wheel Bolt - 1/2"-20
Video of DeeMaxx Drive-In Wheel Stud - 1/2" Diameter x 1-11/16" Long
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for What to Know About the DeeMaxx Drive-In Wheel Stud
Hi there, I'm Michael with etrailer.com. Today we're gonna take a quick look at this DeeMaxx 1/2 inch diameter wheel bolt. This wheel stud is designed for your DeeMaxx 10 inch and 12 inch integral hub and rotor brake assemblies. That is a grade eight bolt with corrosion resistant zinc finish on it. The overall length is going to be 1 11/16 of an inch. Our thread size is 1/2 inch by 20 and it does have the neural grade here of 0.545.
And because this does come from DeeMaxx you can trust if you are needing to replace one of your original wheel bolts this is gonna do a great job for you fitting in place of that original. That completes our look for today. Again, I'm Michael with etrailer.com. Thanks for watching.
Customer Reviews
DeeMaxx Drive-In Wheel Stud - 1/2" Diameter x 1-11/16" Long - DE45GR
Average Customer Rating: 5.0 out of 5 stars (4 Customer Reviews)
Grade 8 wheel stud fits DeeMaxx 10" and 12" hub-and-rotor assemblies, but its standard 1/2"-20 thread size will work on other hub assemblies just as well.by: David 07/24/2024
The product was good quality only thing that bothered me was when I ordered them I was told they'd be here in 3-5 days then 3 days later told expected delivery is 7-14 days. Other than that no problem. I just reordered so we'll see how this delivery goes.
by: Michael 02/09/2024
by: Glen 09/09/2024
by: Craig08/29/2023
4
4
See what our Experts say about this DeeMaxx Accessories and Parts
- Looking For 1/2" x 20 Wheel Studs With .500" Knurl Diameter Hello Pat, thanks for reaching out. All of the 1/2" x 20 wheel studs we offer have a .545" knurl diameter. If you can make that work, I recommend the DeeMaxx Drive-In Wheel Stud # DE52GR which is 2" long overall, or the # DE45GR which is 1-11/16" long. These have rounded heads so you will have to cut a piece off.
view full answer...
Info for this part was:
Edited by:
Lindsey S
Installed by:
Michael B
Written by:
Ryan F
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.