DeeMaxx Drive-In Wheel Stud - 1/2" Diameter x 2" Long
(4 reviews)
Price: $5.41
In Stock
DeeMaxx
Add to cart
DeeMaxx Drive-In Wheel Stud - 1/2" Diameter x 2" Long
Part Number: DE52GR
In Stock
$5.41
Need help with installation?
Locate installers near me- All Info
- Reviews (4)
- Q & A (0)
- Videos (1)
- Photos
DeeMaxx Accessories and Parts - DE52GR
- Boat Trailer Wheels
- Trailer Hubs and Drums
- Trailer Tires and Wheels
- Wheel Studs
- Drive-In Stud
- DeeMaxx
- 2 Inch Long
- 1/2 Inch Diameter
Grade 8 wheel stud fits DeeMaxx 13" hub-and-rotor assemblies, but its standard 1/2"-20 thread size will fit other hub assemblies just as well.
Features:
- Replaces 1 drive-in wheel stud for your trailer's hub assembly
- Fits 13" DeeMaxx hub-and-rotor assemblies
- Resists corrosion thanks to zinc finish
- Performs well even in the most demanding environments
- Grade 8 bolt is fit for automotive applications
- Ultra-high tensile strength
Specs:
- Stud length: 2"
- Thread size: 1/2"-20
- Knurl grade: 0.545"
RTR/HUB-7K-131-STUD Dee Maxx Press-In Wheel Bolt - 1/2"-20
Video of DeeMaxx Drive-In Wheel Stud - 1/2" Diameter x 2" Long
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Review of DeeMaxx 2 Inch Wheel Bolt For 13 Inch Integral Hub And Rotor Brake Assembly - DE52GR
Hi everybody. Andy here with etrailer.com. Let's take a real quick look at this DeeMaxx Wheel Bolt. Now this wheel bolt is designed for your one-piece DeeMaxx 13-inch integral hub-and-rotor brake assemblies. This grade eight bolt has a corrosion resistant zinc finish. And let me go ahead and just give you that stub length measurement.
So as you can see it's two inches. And the thread size is a half an inch by 20. The neural grade is 0.545 inches. I think that's gonna wrap up our real quick look today. I do hope that it was helpful for you.
Again, my name is Andy. Thank you for joining me.
Customer Satisfaction Score:
94% were satisfied with this product
6% of customers were not satisfied
- Wrong item was ordered
Customer Reviews
DeeMaxx Drive-In Wheel Stud - 1/2" Diameter x 2" Long - DE52GR
Average Customer Rating: 5.0 out of 5 stars (4 Customer Reviews)
Grade 8 wheel stud fits DeeMaxx 13" hub-and-rotor assemblies, but its standard 1/2"-20 thread size will fit other hub assemblies just as well.by: Michael02/10/2024
Perfect replacement !
by: Delmar05/01/2024
Very prompt service with quality customer service!
by: Jerry 02/04/2024
Worked great!!!
by: John 03/28/2024
4
4
See what our Experts say about this DeeMaxx Accessories and Parts
- Replacement 1/2" Thread Wheel Studs For A Trailer Hi Lane, The closest option we have to the measurements you provided would be the DeeMaxx Drive-In Wheel Stud - 1/2" Diameter x 2" Long # DE52GR.
view full answer... - Looking For 1/2" x 20 Wheel Studs With .500" Knurl Diameter Hello Pat, thanks for reaching out. All of the 1/2" x 20 wheel studs we offer have a .545" knurl diameter. If you can make that work, I recommend the DeeMaxx Drive-In Wheel Stud # DE52GR which is 2" long overall, or the # DE45GR which is 1-11/16" long. These have rounded heads so you will have to cut a piece off.
view full answer... - Replacement Lug Stud for a DeeMaxx Trailer Idler HubTo replace the studs on the DeeMaxx Trailer Idler Hub item # DE36VR you will want the DeeMaxx Wheel Bolt - 1/2" Diameter x 2" Long item # DE52GR.
view full answer... - Replacement Wheel Stud for AxleTek Hub BD2-545-17Hey Joe, for your Axle Tek hub BD2-545-17 our part number # AKHD-545-35-K the correct replacement wheel stud would be the part # DE52GR.
view full answer... - Replacement Wheel Studs For A 3,500lb Trailer Hub Assembly Hey Mike, We sell replacement studs in single or multiple quantities depending on the specific sizing. For a 3,500lb trailer hub you most likely need the # DE52GR but I recommend punching one of your current ones out and comparing. The # DE52GR is 2" in length with a 1/2"-20 thread size. If you find your hubs have a different size wheel stud just let me know and I'd be happy to look for the correct replacement.
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Edited by:
Lindsey S
Installed by:
Andy C
Written by:
Ryan F
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.