Replacement Wheel Stud For A Aljo Travel Trailer
Updated 03/18/2022 | Published 03/17/2022
Question:
need some lugs for a dexter 12inch hub/ 6 bolt. hub says 8-201 and 1268. lugs i need are 1/2 X 20/ 2inch long including head of stud. stud has a number 8 or an S on head with a line through it. can you help?
asked by: Bill L
0
Expert Reply:
The closest option I was able to find is the Wheel Stud # 165995 which measures 2-1/2" long, is 1/2" in diameter, and has 20 threads per inch.
expert reply by:
Bryce D
0
Product Page this Question was Asked From
Wheel Stud - Drive In 1/2" x 2-1/2" (Qty. 1)
- Accessories and Parts
- Boat Trailer Wheels
- Trailer Hubs and Drums
- Trailer Tires and Wheels
- Wheel Studs
- 1/2 Inch Diameter
- Drive-In Stud
- 2-5/8 Inch Long
- Redline
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Replacement Trailer Wheel Studs With 1/2 inch Diameter
- Q&A: Difference Between Kenda Karrier K03 and KR35 Trailer Tires
- Q&A: Wheel Stud that is Longer Than K12WB2 with Same Diameter
- Q&A: How Long is Warranty on Cummins Onan Quiet Series Onboard RV Generator
- Q&A: Can 1/2 Inch Wheel Stud With .54 Inch Knurl Fit Hub With .55 Inch Knurl Stud
- Q&A: Recommended Spacing Between Trailer Tire and Inner Fender
- Q&A: Determining The Correct Replacement Leaf Springs For A 2021 Keystone Passport Grand Touring TT
- Article: How to Bleed Your Trailer Surge Brakes
- Article: Ram Trailer Tow Prep Package
- Article: Trailer Lighting Requirements
- Article: Rust Prevention
- Article: How to Measure for Motorhome Steps
- Article: Double-Eye Trailer Suspension System Review
- Article: What are the Common Types of Propane Fittings Used on RVs?