Replacement Wheel Studs for the Trailer Hub and Drum Assembly # AKHD-655-6-K
Published 01/30/2015
Products Featured in This Question
Question:
Where can find replacement lug studs for this hub? Is there a part #? What are the specs? Thanks!
asked by: Joel C
0
Expert Reply:
The wheel studs of the Trailer Hub and Drum Assembly # AKHD-655-6-K are 1/2 inch diameter. I checked with Dexter and the recommended replacement studs for this hub are the part # 165995.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
Trailer Hub and Drum Assembly - 5,200-lb and 6,000-lb Axles - 12" - 6 on 5-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Drum
- Pre-Greased
- Standard
- 25580 / 15123
- Standard Grade
- For 5200 lbs Axles
- For 6000 lbs Axles
- 1/2 Inch Stud
- 6 on 5-1/2 Inch
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- etrailer
more information >
Continue Researching
- Q&A: Looking for Bearing Kit for 2020 Grand Design Reflection 303RLS
- Article: Most Popular Wheel Bearings
- Q&A: Replacement Brake Assemblies for Hubs Marked BD-655-17
- Article: Trailer Brakes Not Working? Troubleshooting Guide
- Q&A: Will the TruRyde Hub and Drum Assembly part # TRU38AV Fit a Dexter Nev-R-Adjust Brake part # 23-459?
- Q&A: Difference Between a Single and Double Lip Seal
- Q&A: Replacement for Atwood 61101 Brake Actuator
- Q&A: How to Identify Correct Replacement Electric Drum Brakes for 1987 Avion Travel Trailer
- Q&A: Bearing Kit Recommendation for Lippert 5,100 lb Trailer Axle
- Article: Electric Trailer Brakes: How They Work & What to Buy
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: Trailer Lighting Requirements
- Article: Trailer Wiring Diagrams
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer