Designed for tandem-axle trailers, this hydraulic brake line kit includes a 15' long steel brake line, (2) 6' steel lines, (3) 2-1/2' steel lines, a 19" flexible hose, and hardware required for affixing lines to your trailer.
Features:
1. 180" Long steel line runs from the hydraulic actuator to the trailer axle that has brakes.
2. Brake line clips and screws let you affix the steel lines to your trailer.
3. 19" Long flexible hoses connect the steel line from the actuator to the lines that go to the trailer brakes.
4. 5/8" Machine bushing is used in the connection between the flexible hose and the steel line from the actuator.
5. Hose brackets let you attach the flexible hoses to your trailer.
6. Additional steel lines (30" long and 72" long) run to each trailer brake assembly.
7. Brake line tees connect the flexible hoses to the steel lines that run to the brakes.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
We're going to take a look at the Demco hydraulic drum brake line kit for tandem axles. This will provide the line, the fittings that are needed to run your brake fluid from your surge brake actuator to your trailer brakes. It is designed for use on a tandem axle trailer with drum brakes. It does include everything laid out here on the table. We're going to go through all the pieces here. Start with this 15 foot long steel brake line, two of the six foot long steel brake lines, three of the two and a half foot long steel brake lines.
Got two of the 19 inch long flexible hoses. The two hose brackets, the two brake line retainer clips. Have a break full flow fitting here, a 3/16" adapter tee, and then two 3/16 brake tees, four the brake line control clips, and then for the half inch self drilling hex washer head screws and they do give you a six of the nylon cable ties to take up any slack in the brake lines. But that should do it for the review on the Demco hydraulic drum brake line kit for tandem axles.
Average Customer Rating: 5.0 out of 5 stars (1 Customer Reviews)
Designed for tandem-axle trailers, this hydraulic brake line kit includes a 15' long steel brake line, (2) 6' steel lines, (3) 2-1/2' steel lines, a 19" flexible hose, and hardware required for affixing lines to your trailer.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.