1. Accessories and Parts
  2. Kodiak
  3. Trailer Brakes
  4. Hydraulic Drum Brakes
  5. Disc Brakes
  6. Brake Lines
Kodiak Hydraulic Brake Line Kit - Tandem Axle - 20'

Kodiak Hydraulic Brake Line Kit - Tandem Axle - 20'

Item # 20TA-BLKIT
lowest price pledge
Our Price: $139.56
Accessories and Parts
This item qualifies for Free Shipping
Shipping Weight: 4 lbs
Accessories and Parts 20TA-BLKIT - 20 Feet Long - Kodiak
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos


Need help with installation?
Locate installers near me
Brake line kit lets you run brake fluid from your surge brake actuator to your trailer brakes. Great for disc brakes and torsion axles. Includes 20', (2) 7', 3-1/2', and (2) 1-1/2' flexible hoses, plus fittings and hardware. Call 800-298-1624 to order Kodiak accessories and parts part number 20TA-BLKIT or order online at etrailer.com. Free expert support on all Kodiak products. Guaranteed Lowest Price and Fastest Shipping for Kodiak Hydraulic Brake Line Kit - Tandem Axle - 20'. Accessories and Parts reviews from real customers.
  • All Info
  • Reviews (32)
  • Q & A (45)
  • Photos
  • Why etrailer?

Kodiak Accessories and Parts - 20TA-BLKIT

  • Trailer Brakes
  • Hydraulic Drum Brakes
  • Disc Brakes
  • Brake Lines
  • Kodiak
  • Brake Line Kits
  • 20 Feet Long
  • Tandem Axle
  • Flexible Brake Hose

Brake line kit lets you run brake fluid from your surge brake actuator to your trailer brakes. Great for disc brakes and torsion axles. Includes 20', (2) 7', 3-1/2', and (2) 1-1/2' flexible hoses, plus fittings and hardware.


  • Brake hoses and fittings let you run brake fluid from your surge brake actuator to your trailer brakes
    • Designed for use on tandem-axle trailers with drum or disc brakes
  • Flexible design makes hoses perfect for use with foldaway trailer tongues, disc brakes, and torsion axles
    • Rubber hoses meet DOT and SAE standards and are easier to install than rigid steel lines
  • Brass, male, swivel flare nut fittings on ends of each hose have deep threads
    • Deep threads improve connection to help prevent leaks
    • Swivels allow flare fittings to turn without the hose twisting
  • Open area on flare fittings lets you use a line wrench for better grip
    • Minimizes the risk of stripping threads
    • Fittings are double-crimped onto hoses
  • Corrosion-resistant, brass fittings connect hydraulic lines
    • Female inverted flares (FIF) at each port
  • Heavy-duty loom clamps secure hoses to your trailer's frame
  • Kit includes:
    • (1) 20' Long flexible brake line
    • (2) 7' Long flexible brake lines
    • (1) 3-1/2' Long flexible brake line
    • (2) 1-1/2' Long flexible brake lines
    • 1 Cross fitting
    • 1 Tee fitting
    • (20) 1/2" Loom clamps


  • Hose inner diameter: 1/8"
  • Fitting size: 3/16"
    • Thread size: 3/8"-24
  • 3-Year limited warranty on hoses and fittings

Hydraulic Brake Line Installation for Tandem-Axle Trailers

Tandem Axle Brake Line Kit

  • (A) 20' Long flexible brake line (BH-3MFS-20)
  • (B) 7' Long flexible brake lines (BH-3MFS-7)
  • (C) 1-1/2' Long flexible brake lines (BH-3MFS-1-5)
  • (D) Tee fitting (BH-T-3FIF)
  • (E) Loom clamps (A0500)
  • (F) Cross fitting (BH-X-3FIF)
  • (G) 3-1/2' Long flexible brake line (BH-3MFS-3-5)

Flexible Rubber Brake Hoses

Kodiak brake hoses are made of rubber, making them a practical choice for a variety of applications. Because you can easily bend them, rubber hoses are simpler to work with than rigid stainless steel brake lines. This flexibility makes rubber hoses great for use with foldaway trailer tongues because they are less likely to kink or break when bent. In addition, rubber hoses allow for a wide range of motion so articulating parts can effectively function. These qualities make rubber hoses better suited than steel lines for trailers with torsion axle suspension systems and trailers that have disc brakes.

Stainless steel brake lines have braided exteriors, which can not only wear against exterior surfaces, but also against the interior lining of the hose if dirt gets underneath the steel braid. And if the braid on a stainless steel line tears, it can cut into the hose lining. The exterior surface of these hoses is solid rubber, so there are no crevices for debris to enter.

Durable Fittings with Deep Threads

Kodiak Hose Flare

Kodiak brake hoses have corrosion-resistant brass fittings with stainless steel flares. These fittings have a gap built into them that allows room for a line wrench - also called a flare nut wrench - to slide over the line and down to the nut. This type of wrench grips the nut better than a standard open-ended wrench so there is less chance of stripping the threads as you tighten down the nut.

The stainless steel that is used to create the flares on these hoses is stronger than brass. As a result, these fittings are more durable than ones made entirely of brass. The stainless flares are primarily designed to keep the fittings from splitting when you tighten them down, but they offer absolute rust protection as well.

Kodiak's fittings have deeper threads than many other fittings on the market to provide a higher thread engagement. Deeper threads offer an advantage when used with fittings that have the same thread depth. These Kodiak fittings will work with most fittings on the market, but when they're used with other Kodiak fittings, the result is a stronger connection with fewer leaks.

BH-3MFS-20 Kodiak 1/8" ID Rubber Brake Hose - 3/16" MFFN with Male Swivels - 240"

BH-3MFS-7 Kodiak 1/8" ID Rubber Brake Hose - 3/16" MFFN with Male Swivels - 84"

BH-3MFS-3-5 Kodiak 1/8" ID Rubber Brake Hose - 3/16" MFFN with Male Swivels - 42"

BH-3MFS-1-5 Kodiak 1/8" ID Rubber Brake Hose - 3/16" MFFN with Dead Swivels - 18"

BH-X-3FIF Kodiak Forged Brass Cross Fitting for 1/8" Diameter Brake Hose - 3/16" Female Inverted Flare

BH-T-3FIF Kodiak Forged Brass T-Fitting for 1/8" Diameter Brake Hose - 3/16" Female Inverted Flare

A0500 Metal Loom Clamp - 1/2"

Customer Reviews

Kodiak Hydraulic Brake Line Kit - Tandem Axle - 20' - 20TA-BLKIT

Average Customer Rating:  4.9 out of 5 stars   (32 Customer Reviews)

Brake line kit lets you run brake fluid from your surge brake actuator to your trailer brakes. Great for disc brakes and torsion axles. Includes 20', (2) 7', 3-1/2', and (2) 1-1/2' flexible hoses, plus fittings and hardware.


Replaced the steel brake lines on my boat trailer with the Kodiak hydraulic hose kit. The materials arrived quickly with all the necessary parts you need to install it. Install was very easy and only took 1/2 day to remove the existing lines, install the new lines and bleed the system. Been using the trailer regularly and it is flawless. I recently removed the existing drum brakes and installed a Kodiak disc brake set up which was just as easy and also performs excellent. Great product at a better price!


This brake line kit (20TA-BLKIT) was easy to install and after 1 year on my tandem axle boat trailer, used in salt water, still looks brand new. No rust, corrosion or leaks and functions as it should. Much better than the steel lines I replaced. I would recommend this brake line kit.

Still working after a year.
Dan C - 01/30/2021


The new Kodiak brake line kit was extremely easy to install. No instructions needed....now that's what I call a mans job! Ordering was easy, shipment was right on time. This my second purchase from etrailer.com and I will certainly make future purchases as needed and recommendations to friends and family. Here is a picture of my trailer after the install.


Installation was easy, one year after putting on the brakes on I have had zero issues. Money well spent and I would recommend etrailer and kodiak brakes to anyone who wants to switch from drum brakes to hydraulic brakes


I have been on 600 and 3,000 mi trips in the last year with the new brake setup. It works great. Much better than old electric drums. So far so good.


Great kit!! Everything fit together as it should. Good instructions!

This disc brake kit is absolutely the best upgrade I’ve ever made to my 40’ LQ horse trailer. Should be a standard on large trailers!!
Bob D - 03/08/2021


The kit install went smoothly because everything fit the way it should. The instructions were accurate and the torque values included helped make it tight. Much better braking experience than just electric brakes. I took my time replacing all the wheel/hub assemblies but the effort paid off. I highly recommend the Kodiak kit.

Ive put about 9,000 miles on the 5th wheel since converting to the hydraulic disc brakes and Im so much more confident in the handling and performance of the brakes and suspension. It was not the easiest job to do but I took my time and did it right so I know I set everything up correctly. Now I have real stopping power, no fade. Good products, durable and built to last. Thanks, Brian
Brian G - 10/17/2017


The products were ordered on Sunday night late, delivered by Wednesday. Converting drum surge brakes to disc, electric over hydraulic on a boat trailer for 26ft Sea Ray boat. I had everything including Titan brake actuator, 4 kodiac rotor and caliper conversion kits with bearings, and new lines installed by Thursday evening. Installation was straight forward, everything fit perfectly. One of the calipers was malfunctioning (not releasing). I called customer service and I had a new one within two days, it's now installed and working great!! Great product! Awesome service!! Lines all fit great!! Seem to be very high quality!!


Everything arrived on time and was just as it should be. Everything fit and I am a happy customer yet again.


Wish you included the bolts needed to attach to the axle


Stripping down a 16 year old 21 ft. salt water use trailer - from end to end. The folks @ etrailer were very knowledgeable, and helpful in my decision making. From placing the order, to tracking the order, to the way the items were packed for transit. Other distributors could learn from these people; in regards to customer service, following up, both office and warehouse. Unloaded the products last night, nothing short, all quality in regards to their products, with great pricing. The installation videos are a big bonus, and something I'll be taking advantage of, during the restoration. Will follow up with picture, (before and after) when I'm done


It's always great doing business with etrailer. All the best products and great service too. The Kodiak brake line kit is better than what came on the trailer from the original manufacturer.


Well worth the price, have had these for 1 year. No signs of rust or deterioration. My old brake lines rusted away in 2.5 years. Trailer only goes in salt water. Highly recommend these brake lines. Very easy to install


Purchased new brakes and brake lines for my boat trailer. I made an error in my order and Katie was very responsive on making it right. Quick delivery and no border challenges on way to Canada. I will definitely make trailer my first stop in the future.


Good product and easy to install. Mounting clamps/c-clips were missing upon delivery. Etrailer made it right and sent out replacement clips. Installation was a breeze.


I put these Kodiak brakes on a year ago. They have preformed fawlessly for me. They have indeed saved my brakes on my truck and prevented a couple accidents do to sudden braking. A must have.


Just finished putting the item on the trailer then had to order a new wheel cylinder thanks. E trailer for good quality products


The brake linings arrived on time and as advertised. Thank you.


I purchased this as I had an older trailer and adding brakes to the second axle. This was a super easy set up over using steel! Zero frustration laying it out and easy to install. Great system


Fast, simple way to replace brake lines on a trailer. Easier than steel lines!


Products shipped the same day ordered and was as described. All parts performed as describer and I would surely order again from etrailer.com....


Hi, just thought I'd let you know how happy I am with my order. The quality is excellent, and the packaging was far better than anything else I've ordered online. In fact I liked it so much I ordered another product from you today. Thanks so much. Rick


Great product! Shipping was expedited! Installation went well ! I will order from this company again!


Shipped fast and arrived in perfect condition. Nice quality and installation looks to be straightforward.


Nice kit easy to install from opening the box to installed 15 minutes

Show More Reviews

Ask the Experts about this Kodiak Accessories and Parts

  • Replacement Brake Line/Hose for Dexter 8K Disc Brake Axle
    There are several brake lines in varying lengths and sizes between your disc brake assembly and the surge brake coupler on your trailer. I am not sure which one you are looking for but if you can pinpoint this for me I may have some better advice for you. In the meantime, I have attached for you a photo that shows what brake lines go to and from a disc brake assembly and surge brake coupler on a tandem axle trailer. A) Kodiak Hydraulic Brake Hose part # BH-3MFS-20 (3/8"-24 x 20') *20'...
    view full answer...
    Image 1 for
  • Correct Length of Kodiak Tandem Axle Brake Line Kit
    The Kodiak # 20TA-BLKIT 20 foot brake line kit will work if the distance from the rear of the coupler to the front trailer axle is roughly 18 to 19 feet, as you'll need some slack for the swing-away coupler to move freely. having a little extra length won't hurt, but you don't want to come up short because you can't easily make a splice like you can with steel brake lines. So in a nutshell, the advertised length of the kit you need will be the length of the longest line in the kit, and...
    view full answer...
  • Hydraulic Trailer Drum Brakes For 7 Inch Drums and 10 Inch Wheels on Tandem Axle Trailer
    We do have an option for hydraulic drum brakes that fit a 7 inch drum and are compatible with 10 inch wheels, which are the following: - Dexter Hydraulic Trailer Brake Kit # 23-398-399 This is the entire kit that includes both the left and right hand brakes, as well as the mounting hardware needed for the installation. For a tandem axle trailer you will need a pair of these kits. If you also need brake lines we have that as well depending on the length you need: - 18 Feet: Kodiak...
    view full answer...
  • Brake Line Kit Recommendation for Dexter Brake Assemblies 23-398 and 23-399
    Trailer brakes use the same thread size whether they are disc or drum. The Kodiak Hydraulic Brake Line Kit # 20TA-BLKIT that you referenced would work well with the Dexter drums # 23-398 and # 23-399.
    view full answer...
  • Determining Correct Replacement Brake Line Kit For 1989/1990 EZ Loader Boat Trailer
    We have a wide variety of brake line kits that may work on your 1989/1990 EZ Loader Boat Trailer but the correct kit will be dependent on the length of your specific trailer. For example if your trailer is around 15' we have the HydraStar Hydraulic Brake Line Kit # HS496-152 which includes new main line to run from the surge brake actuator on the trailer to the back of the trailer, and four separate lines to run to each braking assembly. If your trailer is longer then you will need...
    view full answer...
  • Should a Boat Trailer Have Hydraulic Brakes on Both the Front and Rear Axle
    It is recommended to have brakes on both axles, but it isn't unheard of to just have brakes on one axle. What this means though is that you won't get as much stopping power and those brakes are going to wear down a lot quicker than they would if you had brakes on both axles basically because they will be working twice as hard. I am adding links to both our selection of trailer brakes and brake accessories (like brake lines) for you to filter through, but if you can give me some more...
    view full answer...
  • Will Kodiak Hydraulic Tandem Brake Line Kit Work With Trail-Rite 21 Ft Boat Trailer
    The Kodiak Hydraulic Brake Line Kit, part # 20TA-BLKIT would be a great fit for your Trail-rite trailer. From my research I found your trailer is 21 ft 8 inches long and has tandem axles. The 20TA-BLKIT is 20 ft long and has all of the hydraulic lines and fittings needed to run your lines from the actuator to the brakes.
    view full answer...
  • Finish Used on 1/2 Loom Clamps Included in # 20TA-BLKIT Hydraulic Brake Line Kit
    The loom clamps that are included with the # 20TA-BLKIT hydraulic brake line kit are zinc plated steel, not stainless. The zinc plating isn't as corrosion resistant as stainless would be, but it'll still offer some protection.
    view full answer...
  • Replacement Electric Brakes for Dexter PR-FF SEC-FF 5.2KPR-GGSEC-GG 12X2XQ 36-89
    Based on the photo and information you provided, I can tell you have 12 x 2 inch Dexter brake assemblies for 5.2K axles, for which the Electric Trailer Brake Kit # AKEBRK-7-SA will be an excellent replacement. These are self-adjusting brakes so they do not require periodic manual adjustment like standard brakes. To replace the original brake mounting bolts, nuts and lockwashers, you can use # BRKH12.
    view full answer...
    Image 1 for
  • Complete Electric Over Hydraulic Brakes Set Up With Tandem 3,500 lb Timbren Axle-Less Suspension
    We do have all the parts you need for a total conversion to a disc brake electric over hydraulic braking system to go with the Timbren axle-less suspension system. This will include stainless steel brakes and wheel lug nuts, as well as all of the hoses. The hubs will have six lugs so the wheels will need to have a 6 on 5-1/2" bolt pattern, and I will offer my recommendation for those wheels and tires. Here is the list you were wanting with all the needed parts for a new set up: -...
    view full answer...
  • Fit of Kodiak 20TA-BLKIT Brake Line Kit with Hydraulic Drum Brake Assemblies
    The # 20TA-BLKIT brake line kit you referenced is indeed compatible with the # AKUBRK-35-D Hydraulic Brake assemblies you'd looked at, the line kit is compatible with bolt disc and drum brake systems. The brake assemblies will be compatible with your existing axles, assuming the brake mounting flanges have the 2-7/8 inch center to center bolt hole spacing. I've linked to videos featuring the line kit and the brake assemblies you'd looked at.
    view full answer...
    Image 1 for
  • Recommended Parts To Convert Electric Drum Brakes To Electric-Over-Hydraulic Disc Brakes
    To convert your electric drum brakes to electric over hydraulic disc brakes, you will need disc brake assemblies, a brake line kit and an electric over hydraulic actuator. The disc brake kit I recommend with an 8 on 6-1/2 inch bolt pattern and fit on your 7,000-lb axles I recommend part # K2HR712E. This kit has an e-coat finish to help prevent corrosion. This kit comes with 2 hub/rotor assemblies, to convert 1 trailer axle. If you are using brakes on both axles you will need 2 kits....
    view full answer...
  • How to Bleed Brake Lines with Titan Model 60 Hydraulic Brake Actuator Without Electric Lockout
    The Dexter Brake Actuator part # 099-175-20 replaced the Titan 60 that has a master cylinder with a fitting at the end. The fitting is a 3/16 inverted flare where the brake lines connect to. You do not need an extra fitting when you use the actuator. If you ever need to replace the fitting, it is part # T4750300. I recommend Kodiak Brake Line for Single Axle trailers part # 18SI-BLKIT. The flexible line of the Kodiak kit has a thread size of 3/8"-24 and fits a 3/16" fitting like the...
    view full answer...
    Image 1 for
  • Brake Line Kit Compatible With Electric Over Hydraulic Actuator And Disc Brakes
    The HydraStar Electric Over Hydraulic Actuator for Disc Brakes - 1,600 psi, # HBA16 is compatible with the Kodiak Disc Brake Kit - 13" Hub/Rotor - 8 on 6-1/2 - E-Coat - 7,000 lbs # K2HR79E. The Kodiak Hydraulic brake line kit for tandem axle you asked about # 18TA-BLKIT will absolutely work with these two components, but you may want a longer kit for your application. These kits will also work: HydraStar Hydraulic Brake Line Kit - Tandem Axle - 25' Long, 1/4" Main Line # HS496-252 Demco...
    view full answer...
  • Brake Line Kit for Tandem Axle Trailer with Hydraulic Drum Brakes
    You can click on the linked page to see all of our complete tandem axle brake line kits. You can select one for your trailer based on its length; we have kits for trailers from 15 to 30-feet. Some kits like # DM5429 use mostly steel lines but we also have kits that use all flexible lines such as # 20TA-BLKIT which can be a lot easier to install.
    view full answer...
  • Converting Surge Brakes to Electric Over Hydraulic on a Tandem Axle Boat Trailer
    The Hydrastar Electric Over Hydraulic Brake Actuator, # HS381-8067, for disc brakes, would be an excellent choice for your boat trailer with Kodiak disc brakes in a saltwater marine environment. The unit is sealed very well with marine grade gaskets, stainless steel hardware, and an anodized aluminum housing, but it should not be submerged in water. You will want to mount the unit as far forward on the tongue of the trailer as possible to keep the unit from being submerged. This system...
    view full answer...
  • Hydraulic Brake Line for Hydraulic Drum Brake Assembly # AKUBRK-35-D
    The Hydraulic Trailer Brake Kit - Uni-Servo - Dacromet - 10" - Left/Right Hand Assemblies - 3.5K # AKUBRK-35-D will fit the traditional 3/16 inch brake lines like # 18SI-BLKIT or # 20TA-BLKIT which have the thread size of 3/8"-24. You shouldn't need an adapter fitting unless you have the larger 1/4 inch brake lines. In that case the Replacement Adapter Fitting for Titan Hydraulic Brake Kits - 1/4" to 3/16" # T4871700 would be used.
    view full answer...
    Image 1 for
  • What do I Need to Complete an Electric over Hydraulic Brake System for my Trailer With 3,500 axles
    The Kodiak Disc Brake Kit 5 on 4-1/2 Bolt Pattern # K2HR35DS is an excellent choice for an electric over hydraulic brake system. This kit doesn't come with lug nuts or bearings. The lug nuts are part # CE11051, and the bearings are part # L68149 and part # L44649. The first thing you are going to want to install on your trailer is brake lines. We have the Kodiak Hydraulic Brake Line Kit # 18SI-BLKIT if you are just putting the brakes on one axle. Since you have 2 axles that means you...
    view full answer...
  • Brake Line Kit that Could be Used with Military Trailer M101-A2
    We have tandem brake line kits that should work well on your utility trailer like the part # HS496-252 which has a 25 foot main line or part # 20TA-BLKIT which is all flexible lines and a 20 foot feed line.
    view full answer...
  • Recommended Disc Brake Kit, Actuator, and Brake Lines for Tandem 8K TorFlex Axle Trailer
    The Dexter Disc Brake Kit - 12-1/4" Hub/Rotor - Grease - 8 on 6-1/2 - E-Coat - 8,000 lbs # K71-635-92 is a confirmed fit for your TorFlex 8K axles. This kit will work very well for you and you will need one kit for each axle. This upgrade will make a noticeable difference to your trailer. You will only need to add the brake lines and an actuator once these kits are installed. For the electric over hydraulic brake actuator you need, I recommend the HydraStar Electric Over Hydraulic...
    view full answer...
  • Disc Brake Kit for a Trailer with 13 Inch Wheels
    The issue is that the rotors in kit # T4843300 for single axle trailers have trouble with some 13 inch wheels but not all. So what I recommend is using Kodiak disc brakes # K2HR35D (2 would be needed for a tandem axle set up). The Kodiak rotors will work with 13 inch wheels. Then you would just need the coupler, # 099-175-20, and the brake line kit, # 20TA-BLKIT. The rotors above will also need bearings and seals. For a kit for one axle use # BK2-100.
    view full answer...
  • Converting Boat Trailer to Hydraulic Disc Brakes to Use In Saltwater
    For a trailer that will be used in saltwater, the best option for rotors, hubs, and calipers is those made of stainless steel. Galvanized coating is the second best option for saltwater, and then dacromet coatings, which provide extra resistance to saltwater over standard assemblies that are not treated. For the number of times a year you plan to launch in saltwater, I recommend going with components that offer the most rust and corrosion resistance, like stainless steel components....
    view full answer...
  • How To Determine Replacement Hubs And Brakes For Boat Trailer
    Unfortunately, just the outer bearing is not quite enough to figure out what you need for replacement hubs and bearings. For a trailer with that much weight it sounds like you have a tandem trailer. I recommend replacing the bearings and seals on all of the wheels at the same time, even if you are only replacing the brakes on one axle. If you remove the inner and outer bearing and can find the numbers, that will really help. Or you can use digital calipers like part # PTW80157 and take...
    view full answer...
    Image 1 for
  • How Is the T-Fitting for Trailer Brake Lines Mounted Without Integrated Bracket?
    There are a couple of ways to mount the Kodiak Tee Fitting for Hydraulic Brake Hose - Brass - 3/16" Female Inverted Flares # BH-T-3FIF. Many will use brake line mounting hardware on either side of the brake line which will provide enough stability like you see in the # 20TA-BLKIT pictured. Others want more of a direct mount like you are seeking use the metal loom clamp # A0500 directly on the T-fitting itself to give you that solid mount and then add extra clamps further down the brake...
    view full answer...
    Image 1 for Image 2 for
  • Electric Over Hydraulic Disc Brake Actuator for Camping Trailer and Chevy Factory Brake Controller
    The Tuson ActuLink Electric Over Hydraulic Actuator for Disc Brakes - 1,600 psi # 335ACT-1600 is not compatible with the Factory GM brake controller in your 2014 Chevy Silverado. My recommendation for you is to instead use an aftermarket brake controller like the Curt Echo # C51180 which will take priority over your factory controller and will work well. Another option is to use the HydraStar Vented Marine Electric Over Hydraulic Actuator for Disc Brakes - 1,600 psi # HS381-8067 which...
    view full answer...
    Image 1 for
  • Brake Line Kit to be Used with Kodiak Disc Brake Kit K2R35S
    The Kodiak disc brake kit part # K2R35S is designed for one axle. So it fits the left and right of a single axle. If you had a tandem axle you would need to buy two sets of this. I like flexible brake line as it's easier to work with. So for a single axle trailer you would want the part # 18SI-BLKIT. If you have a tandem axle trailer you instead would want the part # 20TA-BLKIT.
    view full answer...
  • Troubleshooting Leaking Atwood Brake Actuator Coupler
    Your Atwood brake actuating coupler should not have started leaking brake fluid based on your manual lockout being engaged, so that is most likely not the issue. The only issue from leaving that lockout engaged should be the lack of trailer brakes, not a leak. The fact that you have a leak is a bigger issue as you won't have proper braking until that is fixed. You may have a line break or a master cylinder leak. If the master cylinder is bad, you unfortunately need to replace the...
    view full answer...
  • Disc Brake Kit for a Grand Design Travel Trailer with 5,000 Pound Lippert Axles
    You likely have 5,200 pound de-rated axles. You can check the bearing numbers stamped into the sides of the bearings in one of the hubs on the trailer now to help determine what will fit. Most likely they use inner bearing 25580 and outer bearing 15123. For a disc brake kit that uses these bearings I recommend # K2HR526DKG. This is a kit for one axle so if you need brakes on both axles you would need 2 kits. For bearings you would need 4 of inner bearing # 25580, 4 of outer bearing...
    view full answer...
  • Recommended Brake Line Kit for Use With Titan Model 60 Brake Actuating Coupler
    The brake line kit that would be best for you will depend the number of brake assemblies, the length of the trailer and whether the brakes are drum or disc. If you have a single axle trailer using drum or disc brakes, and the distance between the actuator and the rear axle is less than 18 feet, the Kodiak # 18SI-BLKIT would work great. The flex hose is easy to work with, and you'll have no worries about a kinked brake line. For a tandem axle trailer with an actuator to rearmost axle...
    view full answer...

Do you have a question about this Accessories and Part?

  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality accessories and parts for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate accessories and part information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Jameson C
Expert Research:
Jameson C
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Jeff D
Installed by:
Jeff D
Employee Tammy D
Written by:
Tammy D
Employee Mike S
Updated by:
Mike S

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.

Product Experts Available Now!
Call 800-298-1624