To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
This setup is made to handle serious towing with a gross towing weight of 16,000 lbs and a vertical load limit of 4,000 lbs. The sturdy steel construction and carbide black finish give it long-lasting durability for hauling big fifth wheels. Once you’re hitched up, it feels solid and secure—exactly what you want when you’re logging miles with a heavy load behind you.
The E16’s slide-bar jaw automatically locks around the king pin, and the rear tension bar clamps down for a tighter hold that minimizes rattle and movement. It’s a simple system that gives you a strong connection without fuss. The anti-rattle skid plate also adds to the quiet ride, keeping things smooth and steady on long hauls.
When maneuvering at slow speeds, the S20 slider creates the clearance needed between cab and trailer. It slides 12" front to back to prevent contact during sharp turns while keeping hitching and towing stable. The non-binding design moves easily so you don’t have to fight with it when adjusting position.
The dual-pivot head makes it easy to line up even when the ground isn’t level. With 10 degrees of side-to-side movement, it helps the king pin settle into place smoothly. Once latched, the connection stays firm for consistent towing performance. A nylon lube plate (sold separately) can be added to keep the motion even smoother while protecting the skid plate from scratches.
Getting your trailer level is straightforward thanks to the 4-position height adjustment that ranges from 14" to 17". Whether you’re fine-tuning bed rail clearance or matching trailer height, these adjustments make it easy to find the right setup for a balanced ride.
Alternate Instructions
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hey guys, this is Jake here with etrailer. Today we're gonna be going over the CURT E16 replacement 5th wheel head. This is designed to replace your E16 5th wheel head. If you've already got one and you're wanting to replace it. If it got damage or if it's old and rusty this is gonna be a perfect fit. It's also gonna come with the replacement bracket.
If you'd like to swap out the head on the S20 which is their new slider base, you can put this in, mount it to the correct height and then put this hitch head right in the top of it. You are gonna get all the replacement parts that initially come with the kit so you'll get new hardware, new pins, a new handle, and this bracket. The best way to get this set up inside the S20 base is to set your head height with the bracket first and then set the head on top of it. Now with our new hardware, we can set the height of our hitch a lot easier than a lot of other hitches out there. A lot of 'em are gonna have to set it with the head attached but this bracket only weighs about 10 pounds so it's really easy to get it in place.
Now to get your new head in place, it's as simple as setting it on top of the bracket. And again, it will come with two new pins. And that's, I think that's kind of nice 'cause when you're replacing you know, new parts you'd like to put new hardware in too 'cause chances are these are gonna be pretty wore out. So some of the reasons why you would need to replace your 5th wheel head is if it's got a lot of rust on it it's gonna start to affect the integrity of the strength of the hitch itself. So if it's got too much rust you might think about replacing it.
If you've not been using enough grease or any grease at all this head can start to score and once it starts scoring you can't really go back 'cause it needs a smooth surface to slide on your kingpin base. Another reason is your grease gets dirty that can cause scoring. If you're not using a lube plate. There's a lot of different reasons of why you would need to replace this head. If your mechanism isn't working correctly anymore.
But it's good to know that you can just replace the head. But with that being said, a lot of people what they'll do is they'll, if they have an A16 or an E16 head and they have the traditional base but they get a new vehicle and they'd like to switch to the slider, you can keep your old head, get the slider, and then later on you can replace the head. So there's several different options and reasons of why you would need a new E16 head. Well, with all that being said, we've got it all installed it's ready to go, and it's ready for our next trip.
Ratings & Reviews
Brooke M.
4/11/2025
Wow--thanks for sharing your experience with the hitch! I bet you aren't the only one this has happened to, and I think you might be saving someone a lot of time with tracking down a solution. Thanks, Juan! Congratulations on the new RV, too!
Steven M.
2/17/2020
One year and plenty of miles with this hitch. Solid and tight feel with little or no squeaking. Very happy with this hitch.
Julio
11/12/2018
More than 1000 miles pulling a 38 fifth wheel and still like new
Kory
5/24/2019
Still Working Great
Z M.
8/8/2019
Update, I still wish this hitch locked. It seems to have some slap in it. It doesnt really hurt anything, however its very noticeable when backing the trailer up. The hitch pin feels like it kind of bounces for lack of a better word against the hitch itself because of how the retaining mechanism is designed. We camp in the summer and are not full time RVers. I would not recommend this if I was a full time RVer.
Jim
6/13/2019
I half to disconnect all the pins and lift hitch out with trailer because I can not get the king pin to release when its hooked up I tried everything so Im not pleased with this hitch?
Do you have a question about this 5th Wheel Hitch?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Nick S.
11/3/2025
I am glad to hear that everything was in tact and in the package despite the damage. The install looked like it went well, it is great to hear the videos were a big help, and it looks great in the truck. What are you planning on towing with the hitch?