To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
This hitch is rated for 21,000 lbs gross towing weight and a 4,000 lbs vertical load limit, giving it the strength to handle large fifth wheels with confidence. The sturdy steel construction and rust-resistant black powder coat finish make it tough enough for long hauls and rough conditions. It’s a solid, dependable setup built to keep your trailer securely in line mile after mile.
For short-bed setups that need extra room in tight spaces, the manual slider gives you 14" of travel front to back. That clearance lets you make sharp, slow-speed turns without the trailer hitting the cab. It’s a simple, mechanical solution that works every time you need the extra space to maneuver.
The wraparound, single-piece jaw closes around the king pin for full 360-degree contact, cutting down on rattle and giving a secure hold. A 3/4" thick solid steel locking bar reinforces the connection so it stays tight under load. The double-pivot head moves front to back and side to side to help limit chucking, while cushioning polyurethane dampeners absorb road shock and reduce noise for a smoother ride.
Hooking up and disconnecting is straightforward thanks to the spring-loaded handle with a comfort grip. It automatically locks into place when the jaw closes, giving you clear feedback that you’re ready to tow. The tethered safety pin keeps the handle secured in either the open or closed position, so you don’t have to worry about misplaced parts during setup or breakdown.
With three height settings—18-3/8", 19-5/8", and 20-7/8"—you can fine-tune your hitch height for level towing and proper bed rail clearance. That flexibility helps match your trailer’s pin box height without needing extra parts or adapters, keeping your rig balanced and ready for long trips.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today, we're going to take a look at the under-bed rail and installation kit for the Demco Hijacker UMS 5th wheel and gooseneck trailer hitches. Now, this is a custom fit part, it is designed to fit the 2002 to 2013 Chevrolet, GMC trucks and Dodge Ram trucks. Now, since this fits so many different versions of those vehicles I would recommend to go to our website, use our fit guide, put in your year and model vehicle and it'll show you if this will work for your application. Now, this complete installation kit's designed for use with the Demco Hijacker UMS 5th wheel and gooseneck trailer hitches. Now, since these under-bed rails are not exposed in the truck bed, it allows for complete access to your truck bed when your hitch is removed. The four mounting holes, two on each rail, will sit flush with your truck bed and they include these plastic cap plugs that'll go over into your truck bed and cover those holes to protect any dirt or grime from getting into them. Now, the brackets here, they're a vehicle specific design which reduces installation time, requires less drilling than your universal systems.
The no-drill brackets will bolt on to the outside of your truck's frame rails, and the cross members will sit along the top of the frame rails beneath the bed and attach to these no-drill brackets. Now, all these parts are a sturdy steel construction. They have a nice black powder coat finish to help resist corrosion. It includes everything shown here on the table, the two rails, the mounting brackets, all the hardware, the cap plugs, fish wire for pulling your bolts through some of the holes, and all the mounting hardware with a nice set of detailed instructions on how to install everything. Now, these parts are made in the USA. That should do it for the review on the under-bed rail and installation kit for the Demco Hijacker UMS 5th wheel and gooseneck trailer hitches..
Ratings & Reviews

Gwendolyn Y.
5/21/2025
5th wheel looks great in your truck, Paul! What kind of trailer are you hauling?

Victoria H.
3/18/2025
Thanks Patrick! I appreciate you taking the time to share your valuable insight. It looks like you're ready to roll. Do you have any trips planned yet?

Harvey
3/3/2020
This Demco 21K fifth wheel hitch is a great piece of equipment. I have pulled my 40 Heartland Bighorn fifth wheel as far north and west as Wisconsin and south and east as Florida. It has performed like I thought it should and beyond. I am sure glad that I chose the Recon over any of the more expensive brands. Its a real performer and it looks pretty cool too!

Kevin
11/20/2023
Pretty good. Still rotating a little. I tightened the main bolt to the ball more than the 30lbs. It’s not rotating as much as it has been. Still haven’t figured out if or where I would drill a hole for a bolt to go in. I’m not really wanting to do that yet.


Jeremiah
9/9/2025
Looks good works good, pull a triple axle Roy hauler rv. No complaints
Do you have a question about this 5th Wheel Hitch?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.






Heather A.
5/26/2026
Thanks for the feedback, we’d like to take a closer look with you to make sure everything is set up correctly. On a 2026 Silverado, the truck height can vary depending on configuration, so a few details will really help us narrow this down. When you have a moment, could you let us know what trailer make and model you’re towing, and whether it’s sitting nose-high or nose-low when connected? Also, do you know which hitch height position you’re currently using on the Demco Recon 5th Wheel Hitch w/ Slider (top, middle, or bottom setting), and whether you’re using the factory puck system on your Silverado? Once we have that information, we can help confirm whether this is an adjustment issue or if another setup change is needed to get everything sitting level.