Free Shipping on Orders Over $99
Only 3 Hours 59 Minutes Remaining
Custom fit Tonneau Cover for your:
Roll up or hatch style tonneau covers by Extang, Access, Truxedo, BAK Industries, or Craftec are custom fit to your Dodge Ram Pickup. Most covers provide a simple no-drill installation on your Dodge Ram Pickup, and all tonneau covers offer either a roll-up or easy removal design to allow you to adjust for any of your hauling needs.
What our customers are saying:
Received my order yesterday thank you for your fast attention into my order
Corner Brooke, NEW
Enter the year, make and model of your truck above to find custom a fit tonneau cover. We offer tonneaus for all types of trucks including Ford, Dodge, Chevy, GMC, Honda, Toyota, Nissan and Mazda. They are available from the highest quality manufacturers, such as extang, BAK, Access, Truxedo, Bestop and Craftec.
Tonneau Cover Accessories
Tonneau Cover Manufacturers
You may also be interested in...
BAK BAKFlip F1 Hard Tonneau Cover Installation - 2011 Dodge Ram Pickup
Today on our 2011 Dodge Ram pickup well be installing the Bakflip F1 hard tonneau cover, part number BAK72207RB. Lets go ahead and go over the operation of our new tonneau cover. Well simply open the tailgate and release the tonneau cover locking cable. Each section has a set of locks and cable so well release each one as we fold it up. Then well fold it up to the cab and install the rods to secure it. Rotate it up underneath the rod lock, loosen the hand knob, shift the slide down onto the rod and then tighten down the knob.
BAKFlip G2 Hard Tonneau Cover Installation - 2014 Dodge Ram Pickup
All right. Today in this 2014 Dodge Ram Pickup, were going to install part number BAK26203RB. All right. To start off, our tonneau cover uses this track right here, so we have to take off all the components that are in the track. First, well go ahead and take off the cap. Theres a little button you can push up and down, and then our tie-downs.
BAK RollBAK G2 Hard Tonneau Cover Installation - 2003 Dodge Ram Pickup
Speaker: Today on our 2003 Dodge Ram pick-up, we'll be installing the Bak G2 Hard Tonneau Cover Part #BAKR15204. Our first step of this install is going to be mounting the aluminum hanger brackets with the self-tapping screws provided. When we install them we'll have them tight to the bulk head of the pick-up bed. Once we have them in position we'll go ahead and use our self-tapping screws to secure them. Next we'll need to install the canister that houses the roll-up cover. It'll sit on the top of the aluminum brackets we've just installed, keeping the back edge of the bracket even with the back edge of the canister. Then we'll take a self-tapping screw, go down through the pre-drilled hole down in the canister bracket down into the aluminum bracket we installed on our bed side. We'll go ahead and put our rail up into position with the tailgate closed.
Extang Solid Fold Hard Tonneau Cover Installation - 2014 Dodge Ram Pickup
Today, on this 2014 Dodge Ram pickup, we're going to install part number Ex56426. This is an Extang solid fold hard tonneau cover. First thing we need to do is get the truck ready to install it. Our truck has a factory tie-down system in the bed, so we have to remove it to install a seal between the tie down system and the truck bed. There's a series of screws on the inside we have to remove. It also has some plastic fasteners inside, too. Next what we have to do is take the sealant and put it between this rail and the bed of the truck. Before we do that, we'll go ahead and we'll clean off the rail and we'll also have to remove the plastic rivets on the inside.
Bestop EZ Fold Folding Tonneau Cover Installation - 2009 Dodge Ram
Today, on our 2009 Dodge Ram Pickup 2500, we'll be installing the Bestop EZFolding Tonneau Cover, part number B1623901.Now, with our tonneau cover ready to be installed, we'll first remove the sealprotection, which is the white stripping along the outer edge. Now, with that removed,we'll go ahead and set the tonneau cover in position. When setting it in position, we'llalign the long edge with the front rail nearest the cab, and the short edges will line upwith the side rails that extend to the rear. And then we'll go ahead and get underneaththe tonneau cover, rotate the clamp down, and slide it over to the side rail. Then we'llrotate it until we pick up any extra slack and lock it into the inner lip of the bed rail.Now we'll go ahead and repeat the same process on the opposite side.Now, with both front clamps secured, we'll go ahead and fold the cover out. Onceagain, we'll go ahead and repeat the same procedure of pulling the clamps down,sliding them out into the bedrail, rotating them until we take up any extra slack, andthen locking them into position.
Subscribe to email newsletter
privacy - we don't send unsolicited email
All images, layout and content copyright etrailer.com