Access

Expert Answers about Access

• Access Adarac Custom Truck Bed Ladder Rack Part # A70450 for 2010 Dodge Ram with 5-1/2 ft Bed
• The good news is that Access offers part # A70450 that is compatible with your shorter 5-1/2 foot bed, as long as your bed is not equipped with the Rambox. The Access Adarac Ladder Rack you mentioned, part # A70480 is a fit for the 6 foot bed model, and will not work with your 5-1/2 foot bed. To see the install instructions, click on the provided link.
  view full answer...


• Correct Bed Extender Adapter Kit for Original Access Tonneau Cover for a 2012 Nissan Titan King Cab
• The Sliding Bed Extender Adapter Kit, # 834532006946, that you have referenced is the correct kit you will need for the Access Original Tonneau Cover, # 834532006854, for a 2012 Nissan Frontier King Cab. This adapter is designed specifically for the Access covers to allow you to use the factory bed extender. I cannot say if the Truxedo and Access parts will work together or not because they have not been tested together. Since you have ordered an Access cover, though, the 834532006946 is corr
  view full answer...


• Will an Access Tonneau Cover Fit a 2007 Chevy Silverado New Body with a Spray-in Bed Liner
• Access states that you can use the Vanish Roll-Up Tonneau Cover, # 834532007875, with a spray-in, over the rail bed liner. If it were a drop in over the rail bed liner you would have to trim the bed liner to install the cover. Spray-in bed liners will not have to be trimmed. I have included a link to all of the tonneau covers for the 2007 Chevy Silverado New Body. Just select the bed type and length to see the available options.
  view full answer...


• Can a LiteRider Roll-Up Tonneau Cover by Access be Used on a 2010 Toyota Tacoma with a Bed Liner
• I checked with Access and as long as your plastic bed liner does not come up and over the side rails you could use this LiteRider Roll-Up Tonneau Cover by Access # 834532006724 on your 2010 Toyota Tacoma. If the bed liner does come up and over the side rails you will need to trim back that portion.
  view full answer...


• Comparing Access and Truxedo Tonneau Covers for a 2011 Ford Ranger with a 6 Foot Bed
• For me, between the Access Cover, # A22010109 and the Truxedo, # TX250101, I would go with the Access cover because it is as low profile design. It sits only 1/2 inch above the bed rails. The Truxedo cover is 1-1/2 inches above the rails. Given that the prices are about the same, what would sell me on the Access cover is that low profile design. In terms of keeping out water, the Access cover comes with a weather seal that runs along the truck bed sides and you can add a tailgate gasket, # 8
  view full answer...


• What Tonneau Covers Fit a 1999 GMC Sierra Stepside
• Without knowing the make and model of the cover that the first owner had on it, I cannot say whether or not an Access cover or another cover will fit with any degree of certainty. It may have been removed because there was some sort of problem with it, so it may be a good idea to go with a new one and get all new parts. The good news is that we do have some covers that specifically fit the stepside model of the 1999 GMC Sierra in different price ranges. On the lower end of the cost spect
  view full answer...


• Which Tonneau Covers Fit a 2011 Nissan Frontier King Cab with Utili-Trac System
• There are a few tonneau covers that will fit your 2011 Nissan Frontier King Cab with the Utili-Trac system. First, we have the Access Roll-Up Tonneau Cover, # 834532006854. This is a roll up type of cover and it is the most popular tonneau for your vehicle. If you also have the Nissan sliding bed extender, you would also need the Sliding Bed Extender Adapter Kit, # 834532006946, so the tonneau will fit. The next step down is Vanish Roll-Up Tonneau Cover, # 834532007950. It will work with t
  view full answer...


• Availability of Access Tonneau Covers for 2011 Nissan Frontier
• There are a few different styles of Access tonneau covers that will fit your 2011 Nissan Frontier. The Access tonneau covers are listed for a Nissan Frontier Crew Cab with a 5 foot bed and a Nissan Frontier King Cab with a 6 foot bed. I am including a link to a product page that will show the Access tonneau covers that will fit your 2011 Nissan Frontier if it is a Crew Cab with a 5 foot bed. Also, a link to a product page that will list the Access tonneau covers that will fit a 2011 Nissan Fr
  view full answer...


• Can the Access LED Truck Bed Lighting Kit Be Wired Directly to the Truck Battery
• In order to install the Access LED Truck Bed Lighting Kit, # A70380, so that it can be turned on without the key in the vehicle on, you will have to wire it to a switch and then to the battery. You can use a small rocker switch like # BL0108-00. Use spade terminals to first connect the power wire from the lights to the switch. Then use another spade terminal to connect to one end of the wire in the Modulite Installation Wiring Kit, # 118151. Attach it to the other empty terminal on the switc
  view full answer...


• Difference of Adarac Custom Truck Bed Ladder Rack # A70450 and # A70490
• I spoke with my contact at Access and he said the differences in the Adarac Custom Truck Bed Ladder Rack, part # A70490, for the Ford and the Adarac Custom Truck Bed Ladder Rack, part # A70450, for the Dodge is the length of the rack rails that sit on top of the truck bed rails. The Ford part number fits truck beds that are 5 foot 6 inches long and the Dodge part number fits truck beds that are 5 foot 7 inches long. He also said the pitch, or slope of the bed rails can vary between manufacturers
  view full answer...


• Will Access Roll-Up Tonneau Cover, # 834532006755, Fit On 2006 Toyota Tacoma With Factory Rails
• Yes, this Access Roll-Up Tonneau Cover # 834532006755 will work on your 2006 Toyota Tacoma Double Cab with a short bed and allow you to use your factory side rails and tie downs. Access says it fits behind your factory rail system. You will need to remove the factory rail system and reinstall the Access cover hardware along with the factory rail system.
  view full answer...


• Recommended Tonneau Cover for a 2011 Toyota Tacoma Double Cab Long Bed with Deckrail System
• I spoke with my contact at Access about Tonneau Covers for your 2011 Toyota Tacoma with the deckrail cargo management system. She stated that they do have 2 options that are compatible with the system, but to avoid low profile covers because they can cause fit issues. The covers that would work for you are the Access Tonneau, # 834532006700, and the LiteRider Tonneau, # 834532006724. I have included links to the instructions for the Access model for you to view.
  view full answer...


• Availability of Access Vanish Roll-Up Tonneau Cover For a 2002 Ford F-250 With an 8 Foot Bed
• The Access Vanish Roll-Up tonneau cover that will fit your 2002 Ford F-250 with an eight foot bed is the Access Vanish Roll-Up Tonneau Cover, part # 834532007677. The 2002 F-250 and F-350 models will have a little longer 8 foot bed than the F-150 model. The Access Vanish Roll-Up Tonneau Cover, part # 834532007622 that you have referenced will fit a 1997 to 1999 Ford F-250 Light Duty with the 8 foot bed. I am including a link to a video review on the Access tonneau cover.
  view full answer...


• Installing a Tonneau Cover on 2005 Dodge Ram 3500 with Drop-In Bed Liner
• I spoke with one of our friends at Access, the manufacturer of the tonneau cover. He told me that the LiteRider Roll-Up Tonneau that you mentioned will work with a drop-in bed liner. In order for the clamps to attach to the underside of the bed rail, 6 one inch holes will need to be cut into the bed liner at each attachment point. The extra thickness caused by the bed liner on the inside of the truck bed side rails will not affect the fit.
  view full answer...


• Will a Vanish Roll-Up Tonneau Cover # 834532007943 Work w/ a Bed Extender in a 2008 Nissan Frontier
• Because the cover rails mount on the inside of the box, the bed extender must have at least 3 inches of clearance on each side of the bed when rotated to clear the rails. Or it must be able to detach from the truck, be manually rotated and re-attached. The track of this unit attaches using six sturdy aircraft grade aluminum clamps to secure the tonneau cover rails to the inside of the side rails of your truck. To roll up the cover you will release the trigger latch and begin rolling up th
  view full answer...


• Will Access Roll-Up Tonneau Cover 834532006953 Fit a 2011 Honda Ridgeline
• Yes, the Access Roll-Up Tonneau Cover # 834532006953 will fit your 2011 Honda Ridgeline as long as it is a 4-door model. I would recommend that you also use a TrailSeal tailgate gasket # 834532001583 to prevent moisture and debris from getting inside the bed, and a telescoping retriever pole like part # A50710 will make it easy to unload the bed without having to crawl up into it.
  view full answer...


• Availability of a Tonneau Cover for a 2008 Ford F-150 Flareside/Stepside
• If your 2008 Ford F-150 Flareside has a 77-7/8 inch bed (6-1/2 feet), and does not have the Trac System, you can use the Craftec Hatch-Style Tonneau Cover, # 151934. You can also use the LiteRider Roll-Up Tonneau Cover by Access, # 834532004867. Again, this cover will only fit if the truck bed is 6-1/2 feet and does not have the Trac System. Another option for a 6-1/2 foot bed, flareside, and no Trac System is the Access Roll-Up Tonneau Cover, # 834532004843 or the Access Roll-Up Tonneau Cov
  view full answer...


• Fit of Access Roll-Up Tonneau Cover Part # 834532000258 on 2000 Chevy S-10
• As long as your 2000 Chevy S-10 with the 6 foot bed is a step-side model, the Access Roll-Up Tonneau Cover part # 834532000258 is the correct fit for your truck.
  view full answer...


• What is the Complete Length of TrailSeal Tailgate Gasket, item # 834532001583
• The TrailSeal Tailgate Gasket, item # 834532001583, is 114 inches long 1-1/8 inches wide, and 5/8 inches thick. This seal is made of 1 continuous piece that covers the gap from one side of the truck to the other.
  view full answer...


• Recommendation for a Tonneau Cover for a 1999 Ford F-150 Flareside
• Yes, I recommend the TruXedo TruXport Soft Roll-up Tonneau Cover, # TX248601. It is designed to fit Flareside models. I have included a link to the installation details below. We also carry the Craftec Hatch-Style Tonneau Cover, # 151927, that will also fit. Instead of rolling up, this cover lifts up with the assistance of gas struts. Plus it has the added benefit of being a little more economical than the other available covers.
  view full answer...


• Does Access Roll-Up Tonneau Cover Allow Full Access to Utili-track System on a 2008 Nissan Titan
• I spoke with my contact at the manufacturer. He stated that the Access Roll-Up Tonneau Cover, # 834532003341, will allow you full access to the Utili-track system in your 2008 Nissan Titan. This applies to the original Access covers, but not the low-profile or Laredo models. I have included a video review of the Access Original Roll Up Tonneau covers below.
  view full answer...


• Does the Vanish Roll-Up Tonneau Cover Block the Bed Rail Stake Pockets when Installed
• When the Vanish Roll-Up Tonneau Cover, # 834532008454, is installed, you will still have access to the bed rail stake pockets. The cover goes over the open part of the bed but does not extend beyond the rails thus leaving the pockets open. I have included a close up picture showing the stake pockets relative to the cover.
  view full answer...


• Will the Access Tonneau Cover # 834532006717 Fit on a 2010 Toyota Tacoma with Factory Bedliner
• The Access Tonneau Covers for the 2010 Toyota Tacoma, 834532006717, will fit on your Tacoma with factory bed liner, if it is not an over the rail type of bed liner. Over the rail bedliners usually interfere with the seal of the Tonneau cover so we do not recommend this installation. If your bed liner ends under the bedside rail on your truck then the Tonneau will work, but you may have to trim a small area where the clamps are installed depending on how thick the bed liner is in those areas.
  view full answer...


• How Long is the Tailgate Seal for 2009 Chevy Silverado Crew Cab
• There is more than enough material to run the gasket around the tailgate on your 2009 Chevy Silverado. The piece of gasket in the kit is 9-1/2 feet long. The width of the material is 1-1/8 inch. The thickness is 5/8 inch, but is very compressible.
  view full answer...


• Bed Extender for 2007 Toyota Tacoma Crew Cab Short Bed
• This is an adapter kit for a Nissan Frontier or Titan to allow the tonneau cover to fit when you have a bed extender. We do not have a bed extender that will slide up to the cab, but we do have a bed extender for a 2007 Toyota Tacoma crew cab short bed. I suggest either the Fold Down Truck Bed Extender - Anodized Silver (part BX4004-01) or in black (BX4004-02). This simply mounts on the end of the bed and folds up. I have included links to both of these products below.
  view full answer...


• Tonneau Cover for a 2004 Toyota Tacoma With Over the Rail Bed Liner
• The LiteRider Roll-Up Tonneau Cover, part # 834532001279 will fit your 2004 Toyota Tacoma with a 6ft bed. This tonneau cover will work great for you, unless your Tacoma has the stepside. Since the cover is a clamp-on style, you should not have to remove or cut your bedliner.
  view full answer...


• Tonneau Cover for a 2004 GMC Pickup with a Rack in the Bed
• If your rack attaches to the inside of the rails, we do not have a tonneau cover that would work for you. If your rack attaches to the top of the rails and does not come down and hook on the inside, then any of the tonneau covers we list for your vehicle will work. The link below will take you to all the tonneau covers available for the 2004 GMC Sierra. You will need to add your vehicle style in the pull down box at the top of the page.
  view full answer...


• Roll-Up Tonneau Cover for a 2008 Ford F-150 with a Toolbox
• As long as your tool box is between 20 inches and 21 inches, the cover will work for you. If your tool box is any wider than that, it will not work.
  view full answer...


• Will Access Roll-Up Tonneau Cover, # 834532006755, Fit On 2008 Toyota Tacoma With Factory Rails
• I called the manufacturer (Access) and they said that the Access Roll-Up Tonneau Cover- Tacoma Double Cab Short Box, # 834532006755, will work together with your 2008 Toyota Tacoma factory rail system. They said it fits behind your factory rail system. You will need to remove the factory rail system and reinstall the Access cover hardware along with the factory rail system. I also have the Access Roll-Up Tonneau Cover, # 834532006700, which fits the 2008 Toyota Tacoma Double Cab Long Box.
  view full answer...