... Heavy-duty jack screw can lift up to 5 tons.Features: Easy-to-use foot lever faces the front - no more bending, squatting, or muddy knees Use the drop leg completely hands-free Drop leg extension makes up about half of the total travel Works best if you have open space between your trailer and your truck Heavy-duty internal components Durable jack screw allows for heavy lifting Twin thrust bearings make extending and retracting jack easy Black powder coated finish on inner and outer tubes Footplate minimizes sinking in soft ground Single speed gearbox is easy to maintain even in a long life of hard work Use the grease zerk fittings to help keep gears working smoothly Weld-on installation Includes footplate, handle, and connecting pin Specs: Lift capacity: 12,000 lbs Support capacity : 20,000 lbs Total travel: 26-1/2" Screw travel : 13-1/2" Drop leg travel : 13" Overall height (from bottom of foot to top of jack): Retracted: 29-1/2" Extended: 56" Outer tube width: 4-3/8" Inner tube width: 4" Footplate dimensions: 9" long x 9" wide Adjustment hole spacing on drop leg: 2-1/2" on center Jack screw diameter: 1-1/4" 1-Year warranty How to Determine the Support Capacity You Need in Your Landing Gear If you will be using this landing gear to lift and lower your trailer onto a hitch ball or kingpin, then you should choose the jack you need based on its lift capacity.
... Manual crank handle and drill bit included for flexible operation.Features: Scissor jacks help to level and stabilize 5th-wheel, travel, horse and cargo trailers Bow-tie bases keep the jacks steady, even on soft surfaces 6-Hole top plates allows for adjustability when mounting Bearing set on crank side extends jack life Manual handle lets you operate the jacks by hand Drill bit attachment socket lets you operate the jacks with a power drill Black powder coated finish is corrosion resistant Zinc-plated screws and hardware are built to last Specs: Lift: 24" Support capacity (each): 7,500 lbs Quantity: 4 jacks Limited lifetime warranty
... The bow-tie bases steady the jacks on soft surfaces. Handle included.Features: Scissor jacks help to level and stabilize 5th-wheel, travel, horse and cargo trailers Bow-tie bases keep the jacks steady, even on soft surfaces 8-Hole top plates allow for adjustability when mounting Bearing set on crank side extends jack life Black powder coat finish resists corrosion Handle included Specs: Height: Collapsed: 5" Extended: 23-3/4" Lift: 18-3/4" Length: 24-7/8" when fully collapsed 26" Long including nut Mounting base: 10" long x 3-1/4" wide Mounting holes: 5/8" long x 3/8" wide Round holes: 5/16" diameter Lift capacity: 10,000 lbs 2,500 lbs per jack Quantity: 4 jacks Note: This jack set is designed to stabilize a portion of your trailer's weight, not to support the full GVWR of your trailer.
... Manual crank handle and drill bit included for flexible operation.Features: Scissor jacks help to level and stabilize 5th-wheel, travel, horse and cargo trailers Bow-tie bases keep the jacks steady, even on soft surfaces 6-Hole top plates allows for adjustability when mounting Bearing set on crank side extends jack life Manual handle lets you operate the jacks by hand Drill bit attachment socket lets you operate the jacks with a power drill Black e-coated finish is corrosion resistant Zinc-plated screws and hardware are built to last Specs: Lift: 24" Support capacity (each): 2,500 lbs Quantity: 4 jacks Limited lifetime warranty
... Manual crank handle and drill bit included for flexible operation.Features: Scissor jacks help to level and stabilize 5th-wheel, travel, horse and cargo trailers Bow-tie bases keep the jacks steady, even on soft surfaces 6-Hole top plates allow for adjustability when mounting Bearing set on crank side extends jack life Manual handle lets you operate the jacks by hand Drill bit attachment socket lets you operate the jacks with a power drill Black e-coated finish is corrosion resistant Zinc-plated screws and hardware are built to last Specs: Lift: 24" Support capacity (each): 2,500 lbs Quantity: 2 jacks Limited lifetime warranty
... Manual crank handle and drill bit included for flexible operation.Features: Scissor jacks help to level and stabilize 5th-wheel, travel, horse and cargo trailers Bow-tie bases keep the jacks steady, even on soft surfaces 6-Hole top plates allow for adjustability when mounting Bearing set on crank side extends jack life Manual handle lets you operate the jacks by hand Drill bit attachment socket lets you operate the jacks with a power drill Black e-coated finish is corrosion resistant Zinc-plated screws and hardware are built to last Specs: Lift: 24" Support capacity (each): 7,500 lbs Quantity: 2 jacks Limited lifetime warranty
Hey Nate, We do not have a 3/4" spindle nut or washer, the smallest option is the 7/8" spindle nut #165931and a 1" washer #SW1000. I cannot find anything smaller. Are you sure the threads on you're spindle are 3/4"? If they…
There is a wiring kit for a brake controller Preston but it's not going to be a plug and play one. The 2025 Toyota Tacoma does not have a plug in brake controller port. Toyota stopped putting them in after the 2023 model. For your Tacoma, I…
Hey Candido, thanks for the picture of your shackles. Based on that you have a 2-1/4 inch long shackle length which is very common so for an upgrade kit that includes much thicker shackles, wet bolts, and bronze bushings we have the part #MR46ZR.…
Hi Lisa; the Rear View Safety Backup Camera #RVS-611-IR is the same as your RVS-MV3-IR. The RVS-MV3-IR replaced the RVS-611-IR and we retained that part number on our site. It still has a 5-pin connector, see the attached photo.
Dan, they won’t. The Dexter 7K ABS brakes #DX69WR / #DX79WR are specifically designed for Dexter Tow Assist axles - the flange offset and ABS tone ring position are unique to Dexter’s design. On Lippert 7K axles, the sensor alignment won’t match, so…
Hello Danny, thanks for reaching out. Yes, the Solera Awning Cradle Support #LC289373 can be used on an awning with a metal weather shield. It will work with virtually any awning that retracts into a cylindrical shape.
If you have 3,500 lb axles the best choice would be 3,500 lb springs so that you could take advantage of the full axle capacity (assuming the trailer is rated similarly). The #e54SR is a great choice for you as it is a 3,500 lb axle leaf spring.
I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…
Hey Don, for your 2024 Ram ProMaster we have the custom fit 7-way kit part #22112 which comes with everything needed to install a fully functional 7-way in your vehicle.
I have a solution for you, but we do not have a double lip grease seal with the exact measurements you specified. However I was able to find out that the GS-1250 DL that you mentioned has the following measurements: Inside Diameter: 1.249"…
Hey Susan, sorry to hear about your microwave. Due to it's age I wasn't able to find it's dimensions to pick out a replacement that would closely match it but I was able to determine it was a 1.0 cubic foot microwave like the High Pointe…
... The bow-tie base steadies the jack on soft surfaces. Includes handle.Features: Scissor jacks help to level and stabilize 5th-wheel, travel, horse and cargo trailers Bow-tie bases keep the jacks steady, even on soft surfaces 8-Hole top plates allow for adjustability when mounting Bearing set on crank side extends jack life Black powder coat finish resists corrosion Handle included Specs: Height: Collapsed: 5" Extended: 23-3/4" Lift: 18-3/4" Length: 24-7/8" when fully collapsed 26" Long including nut Mounting base: 10" long x 3-1/4" wide Mounting holes: 5/8" long x 3/8" wide Round holes: 5/16" diameter Lift capacity: 5,000 lbs 2,500 lbs per jack Quantity: 2 jacks Note: This jack set is designed to stabilize a portion of your trailer's weight, not to support the full GVWR of your trailer.
... The bow-tie bases steady the jacks on soft surfaces. Includes handle.Features: Scissor jacks help to stabilize 5th-wheel, travel, horse, and cargo trailers Bow-tie bases keep the jacks steady, even on soft surfaces Heavy-gauge steel construction ensures durability and strength Black powder coat finish provides protection from rust and corrosion Easy bolt-on installation with included hardware Handle included Specs: Height: Collapsed: 4-1/4" Extended: 24" Lift: 24" Collapsed length: 26-3/16" Mounting base dimensions: 10-1/4" long x 3-1/4" wide Large bolt hole dimensions: 11/16" long x 7/16" wide Small bolt hole diameter: 5/16" Load capacity: 10,000 lbs (5,000 lbs per jack) Quantity: 2 jacks 90-Day warranty Note: This jack set is designed to stabilize a portion of your trailer's weight, not to support the full GVWR of your trailer.
... The bow-tie bases steady the jacks on soft surfaces. Includes handle.Features: Scissor jacks help to stabilize 5th-wheel, travel, horse, and cargo trailers Bow-tie bases keep the jacks steady, even on soft surfaces Heavy-gauge steel construction ensures durability and strength Black powder coat finish provides protection from rust and corrosion Easy bolt-on installation with included hardware Handle included Specs: Height: Collapsed: 4-1/4" Extended: 30" Lift: 30" Collapsed length: 32-1/2" Mounting base diameter: 9" Mounting bolt diameter: 3/8" Load capacity: 10,000 lbs (5,000 lbs per jack) Quantity: 2 jacks 90-Day warranty Note: This jack set is designed to stabilize a portion of your trailer's weight, not to support the full GVWR of your trailer.
Replaces the manual emergency crank handle for your electric A-Frame jack (EJ-3520-BBX or EJ-3520-WBX). Includes 10 mm socket on end of crank handle.Features: Replaces the manual emergency crank handle for your electric A-Frame jack (EJ-3520-BBX or EJ-3520-WBX) Includes 10 mm socket on end of crank handle
Replaces the sidewind jackhandle for your Ark Xtreme off-road trailer jack (ORJW750D or ORJW2SU). Corrosion-resistant zinc finish.Features: Replaces the sidewind jackhandle for your Ark Xtreme off-road trailer jack (ORJW750D or ORJW2SU) Removable for safe and convenient storage Corrosion-resistant zinc finish Fits: Ark Xtreme off-road swing-up trailer jack: ORJW750D Ark Xtreme off-road ratcheting trailer jack: ORJW2SU
Replaces the sidewind jackhandle for your Ark Xtreme off-road trailer jack (ORJW350D, ORJW500D, or ORJW1SU). Corrosion-resistant zinc finish.Features: Replaces the sidewind jackhandle for your Ark Xtreme off-road trailer jack (ORJW350D, ORJW500D, or ORJW1SU) Removable for safe and convenient storage Corrosion-resistant zinc finish Fits: Ark Xtreme off-road swing-up trailer jack: ORJW350D and ORJW500D Ark Xtreme off-road ratcheting trailer jack: ORJW1SU
Designed to level and stabilize your trailer or RV, each of these jacks provide simple, effective leveling. Manual crank can be switched out for a motor (LG-142178 - sold separately). Retracted height is 32-3/4". ...
Give your 5th-wheel trailer or camper some new legs! 19-1/2" inside to inside between weld stops. Includes manual crank and 1 motor, with room to add a 2nd one (sold separately).
Streamline the leveling process with this set of interlocking, stackable blocks. Durable, UV-stabilized resin construction accommodates single and dual wheel trailers and can be used with a variety of other stabilizing equipment.Features: Stackable blocks sit under RV wheels for extra lift Position beneath jacks, stabilizers, or trailer wheels Interlocking design ensures the blocks will not shift once you drive onto them Storage base equipped with convenient nylon handle Durable polypropylene plastic resists immense weight Made in the USA Specs: Quantity: 10 leveling blocks Dimensions: 8-1/2" long x 8-1/2" wide x 1-1/2" thick Added lift: 1" per block + 1/2" Maximum: 4-1/2" 1-Year warranty
Streamline the leveling process with this set of interlocking, stackable blocks. Durable, UV-stabilized resin construction accommodates single and dual wheel trailers and can be used with a variety of other stabilizing equipment.Features: Stackable blocks sit under RV wheels for extra lift Position beneath jacks, stabilizers, or trailer wheels Interlocking design ensures the blocks will not shift once you drive onto them Storage base equipped with convenient nylon handle Durable polypropylene plastic resists immense weight Made in the USA Specs: Quantity: 10 leveling blocks Dimensions: 8-1/2" long x 8-1/2" wide x 1-1/2" thick Added lift: 1" per block + 1/2" Maximum: 4-1/2" 1-Year warranty
Give your 5th-wheel trailer or camper some new legs! 19-1/2" inside to inside between weld stops. Includes manual crank and 1 motor, with room to add a 2nd one (sold separately).
Streamline the leveling process with this set of interlocking, stackable blocks. Durable, UV-stabilized resin construction accommodates single and dual wheel trailers and can be used with a variety of other stabilizing equipment.Features: Stackable blocks sit under RV wheels for extra lift Position beneath jacks, stabilizers, or trailer wheels Interlocking design ensures the blocks will not shift once you drive onto them Storage base equipped with convenient nylon handle Durable polypropylene plastic resists immense weight Made in the USA Specs: Quantity: 10 leveling blocks Dimensions: 17" long x 8-1/2" wide x 1-1/2" thick Added lift: 1" per block + 1/2" Maximum: 4-1/2" 1-Year warranty
Replacement handle shaft fits etrailer and Ram square, direct-weld jacks with a 10,000-lb lift capacity. Durable, zinc finish resists corrosion. Designed for TJD-12000 Series jacks.Features: Replaces the handle shaft on your etrailer or Ram square, direct-weld jack with a 10,000-lb lift capacity Crank handle attaches to this shaft Designed for TJD-12000 Series jacks Includes hardware Overall dimensions: 12" long x 1" diameter
Replaces the sidewind handle from your etrailer or Ram square, direct-weld, sidewind jack with a 7,000-lb capacity. Handle arm has a corrosion-resistant, zinc finish. ... Features: Replaces the sidewind handle on your etrailer or Ram square, direct-weld, sidewind jack with a 7,000-lb capacity Designed for TJD-7000S Series jacks Durable, zinc-finished handle arm resists corrosion Includes handle, pins, bushings, and gear
Replaces the sidewind handle from your etrailer or Ram square, direct-weld, sidewind jack with a 3K- 7K capacity. Handle allows you to manually crank the jack. ... Features: Replaces the sidewind handle on your etrailer or Ram square, direct-weld, sidewind jack with a 3,000 - 7,000-lb capacity Designed for TJD-5000S and TJD-7000S Series jacks Durable, zinc-finished handle arm resists corrosion
Replaces the sidewind handle from your etrailer or Ram swivel marine jack. Grooved handle grip allows for comfortable, easy cranking. Designed for MJ-1000BBX Series jacks.Features: Replaces the sidewind handle from your etrailer or Ram swivel marine jack Designed for use with MJ-1000BBX Series jacks Grooved, black handle grip allows for comfortable, easy cranking Includes bolt and nut for installation
Replaces the topwind handle from your etrailer or Ram square, direct-weld jack with a 3K - 7K capacity. Handle allows you to manually crank the jack. Handle arm has a corrosion-resistant, clear zinc finish and can be folded away for easy storage.Features: Replaces the topwind handle on your etrailer or Ram square, direct-weld jack with a 3,000 - 7,000-lb capacity Fits TJD-5000 and TJD-7000 Series jacks Claw knob allows for comfortable, easy cranking Durable, zinc-finished handle arm resists corrosion Folds in when not in use
Replaces the corrosion-resistant, zinc-finished topwind handle from your etrailer or Ram 2,000-lb or 5,000-lb jack. Handle lets you to manually crank the jack. Designed for TJA-2000, TJA-2001, TJA-2002, TJA-2006, and TJA-5000 Series jacks.Features: Replaces the topwind handle on your etrailer or Ram A-frame jack with a 2,000-lb or 5,000-lb capacity Designed for use with TJA-2000, TJA-2001, TJA-2002, TJA-2006, and TJA-5000 Series jacks Bolt head fastener keeps the handle securely on the jack during operation Durable, zinc-finished handle arm resists corrosion
Filters
