... Drum is for non-ABS brakes.Features: Trailer hub-and-drum assembly non-ABS provides surface area for brake shoes to grip when brake is activated Compatible with electric and hydraulic drum brakes Oil bath lets you check lubricant level without disassembling the hub Look through clear oil cap to check lubrication Sturdy iron construction Bearings, races, oil seal, oil cap, wheel bolts, and lug nuts are included Hub and drum are made in the USA Specs: Application: Dexter 9,000-lb and 10,000-lb general duty axles Works with axles manufactured after July 2009 Wheel size: 16" to 17-1/2" Bolt pattern: 8 on 6-1/2 Pilot hole diameter: 4-3/4" Drum size: 12-1/4" x 3-3/8" Weight capacity: 5,000 lbs Bearing, Race, and Seal Information Bearings (included) Inner bearing: 387A (2.250" inner diameter) Outer bearing: 25580 (1.750" inner diameter) Races (included) Inner race: 382A Outer race: 25520 Unitized oil seal (included): 10-51 Inner diameter: 2.875" Outer diameter: 3.880" Oil cap kit (included): RG04-300 21-88 Cap 10-163 O-ring 46-32 Plug Determining the Bolt Pattern The first number in the bolt pattern is the number of bolt holes.
This hub-and-drum has races already installed to help speed up setup. Add bearing kit DX86ER (sold separately), then finish the job and get back on the road.Brake-Compatible Surface: Works with electric or hydraulic 10" drum brakes. 6 on 5-1/2 Bolt Pattern: Matches common trailer wheel sizes from 13" to 15". Made in the USA: Quality-tested and manufactured for consistent performance.
Hub-and-drum assembly for your trailer. For electric or hydraulic brakes. Fits 3.5K Dexter E-Z Lube and etrailer Easy Grease axles. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, and lug nuts included.Features: Trailer hub-and-drum assembly provides surface area for brake shoes to grip when brake is activated Compatible with electric and hydraulic drum brakes Dexter E-Z Lube and etrailer Easy Grease-compatible grease cap makes lubricating bearings fast and easy Remove rubber plug to access zerk fitting on spindle - no need to disassemble hub Sturdy iron construction Zinc-enriched paint on drum adds durability Zinc-finished bolts resist corrosion Pre-greased hub-and-drum assembly is easy to install - no need to pack bearings Lithium complex, multipurpose grease keeps bearings lubricated Bearings, races, grease seal, grease cap, and lug nuts are included QAI and CSA certified Specs: Application: 3,500-lb Dexter E-Z Lube and etrailer Easy Grease trailer axles with #84 spindles Compatible with standard axles from most manufacturers, including Dexter, Lippert (LCI), and AL-KO Drum dimensions: 10" diameter x 2-1/4" wide Works with 10" brake assembly Bolt pattern: 5 on 4-1/2" Wheel studs: 1/2" diameter x 1-1/4" long Grease cap flange diameter: 1.99" Weight capacity: 1,750 lbs Limited 1-year warranty Bearing, Race, and Seal Information Bearings (included) Inner bearing: L68149 (1.378" inner diameter) Outer bearing: L44649 (1.063" inner diameter) Races (included) Inner race: L68111 Outer race: L44610 Grease seal (included): 58846 Inner diameter: 1.719" Outer diameter: 2.565" Thoroughly Tested for Safety This hub-and-drum assembly meets the requirements for certification by the Canadian Standards Association (CSA).
Install this hub-and-drum assembly on your trailer. For electric or hydraulic brakes. Fits 5.2K and 6K Dexter E-Z Lube and etrailer Easy Grease axles. Inner bearing (25580) and race, outer bearing (15123) and race, grease seal, cap and nuts included.Features: Trailer hub-and-drum assembly provides surface area for brake shoes to grip when brake is activated Compatible with electric and hydraulic drum brakes Dexter E-Z Lube and etrailer Easy Grease-compatible grease cap makes lubricating bearings fast and easy Remove rubber plug to access zerk fitting on spindle - no need to disassemble hub Sturdy iron construction Zinc-enriched paint on drum adds durability Zinc-finished bolts resist corrosion Pre-greased hub-and-drum assembly is easy to install - no need to pack bearings Lithium complex, multipurpose grease keeps bearings lubricated Bearings, races, grease seal, grease cap, and lug nuts are included QAI and CSA certified Specs: Application: 5,200-lb and 6,000-lb Dexter E-Z Lube and etrailer Easy Grease trailer axles with #42 spindles Compatible with standard axles from most manufacturers, including Dexter, Lippert (LCI), and AL-KO Drum dimensions: 12" diameter x 2" wide Works with 12" brake assembly Bolt pattern: 6 on 5-1/2" Wheel studs: 1/2" diameter x 1-1/4" long Grease cap flange diameter: 2.45" Weight capacity: 3,000 lbs Limited 1-year warranty Bearing, Race, and Seal Information Bearings (included) Inner bearing: 25580 (1.75" inner diameter) Outer bearing: 15123 (1.25" inner diameter) Races (included) Inner race: 25520 Outer race: 15245 Grease seal (included): GS2250DL Inner diameter: 2.25" Outer diameter: 3.376" Thoroughly Tested for Safety This hub-and-drum assembly meets the requirements for certification by the Canadian Standards Association (CSA).
Install this hub-and-drum assembly on your trailer. Compatible with electric or hydraulic brakes. Fits 5,200-lb and 6,000-lb axles. Inner bearing (25580) and race, outer bearing (15123) and race, grease seal, grease cap, and lug nuts included.Features: Trailer hub-and-drum assembly provides surface area for brake shoes to grip when brake is activated Compatible with electric and hydraulic drum brakes Sturdy iron construction Zinc-enriched paint on drum adds durability Zinc-finished bolts resist corrosion Pre-greased hub-and-drum assembly is easy to install - no need to pack bearings Lithium complex, multipurpose grease keeps bearings lubricated Bearings, races, grease seal, grease cap, and lug nuts are included QAI and CSA certified Specs: Application: 5,200-lb and 6,000-lb axles with #42 spindles Compatible with standard axles from most manufacturers, including Dexter, Lippert (LCI), and AL-KO Drum dimensions: 12" diameter x 2" wide Works with 12" brake assembly Bolt pattern: 6 on 5-1/2" Wheel studs: 1/2" diameter x 1-1/4" long Grease cap flange diameter: 2.446" Weight capacity: 3,000 lbs Limited 1-year warranty Bearing, Race, and Seal Information Bearings (included) Inner bearing: 25580 (1.75" inner diameter) Outer bearing: 15123 (1.25" inner diameter) Races (included) Inner race: 25520 Outer race: 15245 Grease seal (included): GS2250DL Inner diameter: 2.25" Outer diameter: 3.376" Thoroughly Tested for Safety This hub-and-drum assembly meets the requirements for certification by the Canadian Standards Association (CSA).
Install this hub-and-drum assembly on your trailer. Compatible with electric or hydraulic brakes. Fits 3,500-lb axles. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, and lug nuts included.Features: Trailer hub-and-drum assembly provides surface area for brake shoes to grip when brake is activated Compatible with electric and hydraulic drum brakes Sturdy iron construction Zinc-enriched paint on drum adds durability Zinc-finished bolts resist corrosion Pre-greased hub-and-drum assembly is easy to install - no need to pack bearings Lithium complex, multipurpose grease keeps bearings lubricated Bearings, races, grease seal, grease cap, and lug nuts are included QAI and CSA certified Specs: Application: 3,500-lb axles with #84 spindles Compatible with standard axles from most manufacturers, including Dexter, Lippert (LCI), and AL-KO Drum dimensions: 10" diameter x 2-1/4" wide Works with 10" brake assembly Bolt pattern: 5 on 4-1/2" Wheel studs: 1/2" diameter x 1-1/4" long Grease cap flange diameter: 1.988" Weight capacity: 1,750 lbs Limited 1-year warranty Bearing, Race, and Seal Information Bearings (included) Inner bearing: L68149 (1.378" inner diameter) Outer bearing: L44649 (1.063" inner diameter) Races (included) Inner race: L68111 Outer race: L44610 Grease seal (included): 58846 Inner diameter: 1.719" Outer diameter: 2.565" Thoroughly Tested for Safety This hub-and-drum assembly meets the requirements for certification by the Canadian Standards Association (CSA).
Hi Gary; I'm sorry we don't have a video installing the #DX64XR at this time but I did go pull the installation manual out of the box for you. You need to remove the inner member and then route the cable as seen in the instructions. Dexter…
To install the Redarc Tow-Pro Liberty Brake Controller #RED24FR on your 2024 Dodge Durango you simply need the Plug and Play Wiring Harness #RED77FR. This will allow you to easily plug all the components together so you are ready to tow your trailer…
Hey Kevin, Both the #LM67048 and #15123 have a 1.250" inner diameter, so they are indeed interchangeable as far as spindle fitment is concerned. They will both fit the same spindle, but because they have slightly different outer diameters, the…
Hello Wes, Great question! The only hitch that we have that will not interfere with the sensor at all for the 2025 Subaru Forester is the EcoHitch Hidden Trailer Hitch Receiver - Custom Fit - Class III - 2" #306-X7391. If you go to the product…
Hello, Phil! We do carry replacement wheel studs. The DeeMaxx drive-in wheel stud part #DE53GR would get pressed in from the back of the camper hub so that you can mount your rim to it. I've included a picture below showing all the dimensions of…
The Buyers Products 50 Ton Air Compensated Pintle Hook part #337PH50 measures 2.38" deep by 3" wide. The inner eye diameter is 1.60" wide and 1.37" tall. I contacted Buyers and this hook uses a standard Lunette ring.
The #SP-210275 you were looking at is for a 3500lb axle and is 27" long measured from center of spring eye to center of spring eye. This is the correct spring for your trailer based on the measurements you provided. The next shortest spring…
Hey Rodney! Congrats on your new trailer! If you door weighs 250 lbs or less the Conventional Ramp Door Spring for 8' Wide Enclosed Trailer item #CB250D96SHD will perfectly. You'll just need to trim the shaft down to fit your trailer's…
When selecting ramp springs for a trailer ramp, you will want to know the diameter of your hinge pin and how much space you have available in the hinge. A typical horse trailer or utility trailer ramp uses 3/4 inch hinge pins and would require two…
For your Parallax 555 model there isn't a converter replacement available. You'd have to replace the entire panel with the part #PD4560K18LS8. It does not come with breakers but in manual all of the required ones are listed from different…
Since they didn't list the converter amperage rating on your panel you'll have to just choose the amperage your battery bank requires and then do a bit of investigative work to ensure that the wire gauge used for the converter is enough to…
Hello Jeff, thanks for reaching out, and thanks for providing all that info, it really helps. I looked up that Magic Tilt part number PG1090. It is a UFP model A-60 which is super common and we do have a good replacement for this. Take a look at the…
Install this hub-and-drum assembly on your trailer. Compatible with electric or hydraulic brakes. Fits 3,500-lb axles. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, and lug nuts included.Features: Trailer hub-and-drum assembly provides surface area for brake shoes to grip when brake is activated Compatible with electric and hydraulic drum brakes Sturdy iron construction Zinc-enriched paint on drum adds durability Zinc-finished bolts resist corrosion Pre-greased hub-and-drum assembly is easy to install - no need to pack bearings Lithium complex, multipurpose grease keeps bearings lubricated Bearings, races, grease seal, grease cap, and lug nuts are included QAI and CSA certified Specs: Application: 3,500-lb axles with #84 spindles Compatible with standard axles from most manufacturers, including Dexter, Lippert (LCI), and AL-KO Drum dimensions: 10" diameter x 2-1/4" wide Works with 10" brake assembly Bolt pattern: 5 on 5-1/2" Wheel studs: 1/2" diameter x 1-1/4" long Grease cap flange diameter: 1.988" Weight capacity: 1,750 lbs Limited 1-year warranty Bearing, Race, and Seal Information Bearings (included) Inner bearing: L68149 (1.378" inner diameter) Outer bearing: L44649 (1.063" inner diameter) Races (included) Inner race: L68111 Outer race: L44610 Grease seal (included): 58846 Inner diameter: 1.719" Outer diameter: 2.565" Thoroughly Tested for Safety This hub-and-drum assembly meets the requirements for certification by the Canadian Standards Association (CSA).
Galvanized hub-and-drum assembly is ideal for marine use. For electric or hydraulic brakes. Fits 3.5K E-Z Lube and Easy Grease axles. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, and lug nuts included.Features: Trailer hub-and-drum assembly provides surface area for brake shoes to grip when brake is activated Compatible with electric and hydraulic drum brakes Dexter E-Z Lube and etrailer Easy Grease-compatible grease cap makes lubricating bearings fast and easy Remove rubber plug to access zerk fitting on spindle - no need to disassemble hub Sturdy iron construction Galvanized finish on drum offers excellent corrosion resistance Ideal for use on a boat or snowmobile trailer Zinc-finished bolts resist corrosion Bearings, races, grease seal, grease cap, lug nuts, and 1 hub/drum assembly are included QAI and CSA certified Specs: Application: 3,500-lb Dexter E-Z Lube and etrailer Easy Grease trailer axles with #84 spindles Compatible with standard axles from most manufacturers, including AxleTek, Dexter, Lippert (LCI), and AL-KO Drum dimensions: 10" diameter x 2-1/4" wide Works with 10" brake assembly Bolt pattern: 5 on 4-1/2" Wheel studs: 1/2" diameter x 1-1/4" long Grease cap flange diameter: 1.99" Weight capacity: 1,750 lbs Limited 1-year warranty Bearing, Race, and Seal Information Bearings (included) Inner bearing: L68149 (1.378" inner diameter) Outer bearing: L44649 (1.063" inner diameter) Races (included) Inner race: L68111 Outer race: L44610 Grease seal (included): 58846 Inner diameter: 1.719" Outer diameter: 2.565" Thoroughly Tested for Safety This hub-and-drum assembly meets the requirements for certification by the Canadian Standards Association (CSA).
Hub-and-drum assembly for your trailer. For electric or hydraulic brakes. Fits 3.5K Dexter E-Z Lube and etrailer Easy Grease axles. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, and lug nuts included.Features: Trailer hub-and-drum assembly provides surface area for brake shoes to grip when brake is activated Compatible with electric and hydraulic drum brakes Dexter E-Z Lube and etrailer Easy Grease-compatible grease cap makes lubricating bearings fast and easy Remove rubber plug to access zerk fitting on spindle - no need to disassemble hub Sturdy iron construction Zinc-enriched paint on drum adds durability Zinc-finished bolts resist corrosion Pre-greased hub-and-drum assembly is easy to install - no need to pack bearings Lithium complex, multipurpose grease keeps bearings lubricated Bearings, races, grease seal, grease cap, and lug nuts are included QAI and CSA certified Specs: Application: 3,500-lb Dexter E-Z Lube and etrailer Easy Grease trailer axles with #84 spindles Compatible with standard axles from most manufacturers, including Dexter, Lippert (LCI), and AL-KO Drum dimensions: 10" diameter x 2-1/4" wide Works with 10" brake assembly Bolt pattern: 6 on 5-1/2" Wheel studs: 1/2" diameter x 1-1/4" long Grease cap flange diameter: 1.99" Weight capacity: 1,750 lbs Limited 1-year warranty Bearing, Race, and Seal Information Bearings (included) Inner bearing: L68149 (1.378" inner diameter) Outer bearing: L44649 (1.063" inner diameter) Races (included) Inner race: L68111 Outer race: L44610 Grease seal (included): 58846 Inner diameter: 1.719" Outer diameter: 2.565" Thoroughly Tested for Safety This hub-and-drum assembly meets the requirements for certification by the Canadian Standards Association (CSA).
Hub-and-drum assembly for your trailer. For electric or hydraulic brakes. Fits 3.5K Dexter E-Z Lube and etrailer Easy Grease axles. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, and lug nuts included.Features: Trailer hub-and-drum assembly provides surface area for brake shoes to grip when brake is activated Compatible with electric and hydraulic drum brakes Dexter E-Z Lube and etrailer Easy Grease-compatible grease cap makes lubricating bearings fast and easy Remove rubber plug to access zerk fitting on spindle - no need to disassemble hub Sturdy iron construction Zinc-enriched paint on drum adds durability Zinc-finished bolts resist corrosion Pre-greased hub-and-drum assembly is easy to install - no need to pack bearings Lithium complex, multipurpose grease keeps bearings lubricated Bearings, races, grease seal, grease cap, and lug nuts are included QAI and CSA certified Specs: Application: 3,500-lb Dexter E-Z Lube and etrailer Easy Grease trailer axles with #84 spindles Compatible with standard axles from most manufacturers, including Dexter, Lippert (LCI), and AL-KO Drum dimensions: 10" diameter x 2-1/4" wide Works with 10" brake assembly Bolt pattern: 5 on 5" Wheel studs: 1/2" diameter x 1-1/4" long Grease cap flange diameter: 1.99" Weight capacity: 1,750 lbs Limited 1-year warranty Bearing, Race, and Seal Information Bearings (included) Inner bearing: L68149 (1.378" inner diameter) Outer bearing: L44649 (1.063" inner diameter) Races (included) Inner race: L68111 Outer race: L44610 Grease seal (included): 58846 Inner diameter: 1.719" Outer diameter: 2.565" Thoroughly Tested for Safety This hub-and-drum assembly meets the requirements for certification by the Canadian Standards Association (CSA).
Install this hub-and-drum assembly on your trailer. Compatible with electric or hydraulic brakes. Fits 3,500-lb axles. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, and lug nuts included.Features: Trailer hub-and-drum assembly provides surface area for brake shoes to grip when brake is activated Compatible with electric and hydraulic drum brakes Sturdy iron construction Zinc-enriched paint on drum adds durability Zinc-finished bolts resist corrosion Pre-greased hub-and-drum assembly is easy to install - no need to pack bearings Lithium complex, multipurpose grease keeps bearings lubricated Bearings, races, grease seal, grease cap, and lug nuts are included QAI and CSA certified Specs: Application: 3,500-lb axles with #84 spindles Compatible with standard axles from most manufacturers, including Dexter, Lippert (LCI), and AL-KO Drum dimensions: 10" diameter x 2-1/4" wide Works with 10" brake assembly Bolt pattern: 6 on 5-1/2" Wheel studs: 1/2" diameter x 1-1/4" long Grease cap flange diameter: 1.988" Weight capacity: 1,750 lbs Limited 1-year warranty Bearing, Race, and Seal Information Bearings (included) Inner bearing: L68149 (1.378" inner diameter) Outer bearing: L44649 (1.063" inner diameter) Races (included) Inner race: L68111 Outer race: L44610 Grease seal (included): 58846 Inner diameter: 1.719" Outer diameter: 2.565" Thoroughly Tested for Safety This hub-and-drum assembly meets the requirements for certification by the Canadian Standards Association (CSA).
Hub-and-drum assembly for your trailer. For electric or hydraulic brakes. Fits 2K Dexter E-Z Lube and etrailer Easy Grease axles. Inner bearing (L44649) and race, outer bearing (L44649) and race, grease seal, grease cap, and lug nuts included.Features: Trailer hub-and-drum assembly provides surface area for brake shoes to grip when brake is activated Compatible with electric and hydraulic drum brakes Dexter E-Z Lube and etrailer Easy Grease-compatible grease cap makes lubricating bearings fast and easy Remove rubber plug to access zerk fitting on spindle - no need to disassemble hub Sturdy iron construction Zinc-enriched paint on drum adds durability Zinc-finished bolts resist corrosion Pre-greased hub-and-drum assembly is easy to install - no need to pack bearings Lithium complex, multipurpose grease keeps bearings lubricated Bearings, races, grease seal, grease cap, and lug nuts are included QAI and CSA certified Specs: Application: 2,000-lb Dexter E-Z Lube and etrailer Easy Grease trailer axles with BTR spindles Compatible with standard axles from most manufacturers, including Dexter, Lippert (LCI), and AL-KO Actual drum dimensions: 7-5/8" diameter x 2-7/16" wide Works with 7" brake assembly Bolt pattern: 5 on 4-1/2" Wheel studs: 1/2" diameter x 1-1/4" long Grease cap flange diameter: 1.99" Weight capacity: 1,000 lbs Limited 1-year warranty Bearing, Race, and Seal Information Bearings (included) Inner bearing: L44649 (1.063" inner diameter) Outer bearing: L44649 (1.063" inner diameter) Races (included) Inner race: L44610 Outer race: L44610 Grease seal (included): 10-9 Inner diameter: 1.50" Outer diameter: 1.987" Thoroughly Tested for Safety This hub-and-drum assembly meets the requirements for certification by the Canadian Standards Association (CSA).
Galvanized hub-and-drum assembly is ideal for marine use. Compatible with electric or hydraulic brakes. Fits 3,500-lb axles. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, and lug nuts included.Features: Trailer hub-and-drum assembly provides surface area for brake shoes to grip when brake is activated Compatible with electric and hydraulic drum brakes Sturdy iron construction Galvanized finish on drum offers excellent corrosion resistance Ideal for use on a boat or snowmobile trailer Zinc-finished bolts resist corrosion Bearings, races, grease seal, grease cap, and lug nuts are included QAI and CSA certified Specs: Application: 3,500-lb axles with #84 spindles Compatible with standard axles from most manufacturers, including Dexter, Lippert (LCI), and AL-KO Drum dimensions: 10" diameter x 2-1/4" wide Works with 10" brake assembly Bolt pattern: 5 on 4-1/2" Wheel studs: 1/2" diameter x 1-1/4" long Grease cap flange diameter: 1.988" Weight capacity: 1,750 lbs Limited 1-year warranty Bearing, Race, and Seal Information Bearings (included) Inner bearing: L68149 (1.378" inner diameter) Outer bearing: L44649 (1.063" inner diameter) Races (included) Inner race: L68111 Outer race: L44610 Grease seal (included): 58846 Inner diameter: 1.719" Outer diameter: 2.565" Thoroughly Tested for Safety This hub-and-drum assembly meets the requirements for certification by the Canadian Standards Association (CSA).
Hub-and-drum assembly on your trailer. For electric or hydraulic brakes. Fits 3.5K Dexter E-Z Lube and etrailer Easy Grease axles. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, and lug nuts included.Features: Trailer hub-and-drum assembly provides surface area for brake shoes to grip when brake is activated Compatible with electric and hydraulic drum brakes Dexter E-Z Lube and etrailer Easy Grease-compatible grease cap makes lubricating bearings fast and easy Remove rubber plug to access zerk fitting on spindle - no need to disassemble hub Sturdy iron construction Zinc-enriched paint on drum adds durability Zinc-finished bolts resist corrosion Pre-greased hub-and-drum assembly is easy to install - no need to pack bearings Lithium complex, multipurpose grease keeps bearings lubricated Bearings, races, grease seal, grease cap, and lug nuts are included QAI and CSA certified Specs: Application: 3,500-lb Dexter E-Z Lube and etrailer Easy Grease trailer axles with #84 spindles Compatible with standard axles from most manufacturers, including Dexter, Lippert (LCI), and AL-KO Drum dimensions: 10" diameter x 2-1/4" wide Works with 10" brake assembly Bolt pattern: 5 on 4-3/4" Wheel studs: 1/2" diameter x 1-1/4" long Grease cap flange diameter: 1.99" Weight capacity: 1,750 lbs Limited 1-year warranty Bearing, Race, and Seal Information Bearings (included) Inner bearing: L68149 (1.378" inner diameter) Outer bearing: L44649 (1.063" inner diameter) Races (included) Inner race: L68111 Outer race: L44610 Grease seal (included): 58846 Inner diameter: 1.719" Outer diameter: 2.565" Thoroughly Tested for Safety This hub-and-drum assembly meets the requirements for certification by the Canadian Standards Association (CSA).
Install this hub-and-drum assembly on your trailer. Compatible with electric or hydraulic brakes. Fits 3,500-lb axles. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, and lug nuts included.Features: Trailer hub-and-drum assembly provides surface area for brake shoes to grip when brake is activated Compatible with electric and hydraulic drum brakes Sturdy iron construction Zinc-enriched paint on drum adds durability Zinc-finished bolts resist corrosion Pre-greased hub-and-drum assembly is easy to install - no need to pack bearings Lithium complex, multipurpose grease keeps bearings lubricated Bearings, races, grease seal, grease cap, and lug nuts are included QAI and CSA certified Specs: Application: 3,500-lb axles with #84 spindles Compatible with standard axles from most manufacturers, including Dexter, Lippert (LCI), and AL-KO Drum dimensions: 10" diameter x 2-1/4" wide Works with 10" brake assembly Bolt pattern: 5 on 5" Wheel studs: 1/2" diameter x 1-1/4" long Grease cap flange diameter: 1.988" Weight capacity: 1,750 lbs Limited 1-year warranty Bearing, Race, and Seal Information Bearings (included) Inner bearing: L68149 (1.378" inner diameter) Outer bearing: L44649 (1.063" inner diameter) Races (included) Inner race: L68111 Outer race: L44610 Grease seal (included): 58846 Inner diameter: 1.719" Outer diameter: 2.565" Thoroughly Tested for Safety This hub-and-drum assembly meets the requirements for certification by the Canadian Standards Association (CSA).
Install this hub-and-drum assembly on your trailer. Compatible with electric or hydraulic brakes. Fits 2,000-lb axles. Inner bearing (L44649) and race, outer bearing (L44649) and race, grease seal, grease cap, and lug nuts included.Features: Trailer hub-and-drum assembly provides surface area for brake shoes to grip when brake is activated Compatible with electric and hydraulic drum brakes Sturdy iron construction Zinc-enriched paint on drum adds durability Zinc-finished bolts resist corrosion Pre-greased hub-and-drum assembly is easy to install - no need to pack bearings Lithium complex, multipurpose grease keeps bearings lubricated Bearings, races, grease seal, grease cap, and lug nuts are included QAI and CSA certified Specs: Application: 2,000-lb axles with BTR spindles Compatible with standard axles from most manufacturers, including Dexter, Lippert (LCI), and AL-KO Actual drum dimensions: 7-5/8" diameter x 2-7/16" wide Works with 7" brake assembly Bolt pattern: 5 on 4-1/2" Wheel studs: 1/2" diameter x 1-1/4" long Grease cap flange diameter: 1.988" Weight capacity: 1,000 lbs Limited 1-year warranty Bearing, Race, and Seal Information Bearings (included) Inner bearing: L44649 (1.063" inner diameter) Outer bearing: L44649 (1.063" inner diameter) Races (included) Inner race: L44610 Outer race: L44610 Grease seal (included): 10-9 Inner diameter: 1.50" Outer diameter: 1.987" Thoroughly Tested for Safety This hub-and-drum assembly meets the requirements for certification by the Canadian Standards Association (CSA).
Galvanized hub-and-drum assembly is ideal for marine use. For electric or hydraulic brakes. For 5.2K to 7K E-Z Lube and Easy Grease axles. Inner bearing (25580) and race, outer bearing (14125A) and race, seal, cap, and nuts included.Features: Trailer hub-and-drum assembly provides surface area for brake shoes to grip when brake is activated Compatible with electric and hydraulic drum brakes Dexter E-Z Lube and etrailer Easy Grease-compatible grease cap makes lubricating bearings fast and easy Remove rubber plug to access zerk fitting on spindle - no need to disassemble hub Sturdy iron construction Galvanized finish on drum offers excellent corrosion resistance Ideal for use on a boat or snowmobile trailer Zinc-finished bolts resist corrosion Bearings, races, grease seal, grease cap, and lug nuts are included QAI and CSA certified Specs: Application: 5,200-lb, 6,000-lb, and 7,000-lb Dexter E-Z Lube and etrailer Easy Grease trailer axles with #42 spindles Compatible with standard axles from most manufacturers, including Dexter, Lippert (LCI), and AL-KO Drum dimensions: 12" diameter x 2" long Works with 12" brake assembly Bolt pattern: 8 on 6-1/2" Wheel studs: 1/2" diameter x 1-5/16" long Grease cap flange diameter: 2.72" Weight capacity: 3,500 lbs Limited 1-year warranty Bearing, Race, and Seal Information Bearings (included) Inner bearing: 25580 (1.75" inner diameter) Outer bearing: 14125A (1.25" inner diameter) Races (included) Inner race: 25520 Outer race: 14276 Grease seal (included): GS2250DL Inner diameter: 2.25" Outer diameter: 3.376" Thoroughly Tested for Safety This hub-and-drum assembly meets the requirements for certification by the Canadian Standards Association (CSA).
Hub-and-drum assembly for your trailer. For electric or hydraulic brakes. Fits 3.5K Dexter EZ-Lube and etrailer Easy Grease axles. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, and lug nuts included.Features: Trailer hub-and-drum assembly provides surface area for brake shoes to grip when brake is activated Compatible with electric and hydraulic drum brakes Dexter E-Z Lube and etrailer Easy Grease-compatible grease cap makes lubricating bearings fast and easy Remove rubber plug to access zerk fitting on spindle - no need to disassemble hub Sturdy iron construction Zinc-enriched paint on drum adds durability Zinc-finished bolts resist corrosion Pre-greased hub-and-drum assembly is easy to install - no need to pack bearings Lithium complex, multipurpose grease keeps bearings lubricated Bearings, races, grease seal, grease cap, and lug nuts are included QAI and CSA certified Specs: Application: 3,500-lb Dexter E-Z Lube and etrailer Easy Grease trailer axles with #84 spindles Compatible with standard axles from most manufacturers, including Dexter, Lippert (LCI), and AL-KO Drum dimensions: 10" diameter x 2-1/4" wide Works with 10" brake assembly Bolt pattern: 5 on 5-1/2" Wheel studs: 1/2" diameter x 1-1/4" long Grease cap flange diameter: 1.99" Weight capacity: 1,750 lbs Limited 1-year warranty Bearing, Race, and Seal Information Bearings (included) Inner bearing: L68149 (1.378" inner diameter) Outer bearing: L44649 (1.063" inner diameter) Races (included) Inner race: L68111 Outer race: L44610 Grease seal (included): 58846 Inner diameter: 1.719" Outer diameter: 2.565" Thoroughly Tested for Safety This hub-and-drum assembly meets the requirements for certification by the Canadian Standards Association (CSA).
Install this hub-and-drum assembly on your trailer. Compatible with electric or hydraulic brakes. Fits 3,500-lb axles. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, and lug nuts included.Features: Trailer hub-and-drum assembly provides surface area for brake shoes to grip when brake is activated Compatible with electric and hydraulic drum brakes Sturdy iron construction Zinc-enriched paint on drum adds durability Zinc-finished bolts resist corrosion Pre-greased hub-and-drum assembly is easy to install - no need to pack bearings Lithium complex, multipurpose grease keeps bearings lubricated Bearings, races, grease seal, grease cap, and lug nuts are included QAI and CSA certified Specs: Application: 3,500-lb axles with #84 spindles Compatible with standard axles from most manufacturers, including Dexter, Lippert (LCI), and AL-KO Drum dimensions: 10" diameter x 2-1/4" wide Works with 10" brake assembly Bolt pattern: 5 on 4-3/4" Wheel studs: 1/2" diameter x 1-1/4" long Grease cap flange diameter: 1.988" Weight capacity: 1,750 lbs 1-Year limited warranty Bearing, Race, and Seal Information Bearings (included) Inner bearing: L68149 (1.378" inner diameter) Outer bearing: L44649 (1.063" inner diameter) Races (included) Inner race: L68111 Outer race: L44610 Grease seal (included): 58846 Inner diameter: 1.719" Outer diameter: 2.565" Thoroughly Tested for Safety This hub-and-drum assembly meets the requirements for certification by the Canadian Standards Association (CSA).
Hub-and-drum assembly for your trailer. For electric or hydraulic brakes. Fits 2K Dexter E-Z Lube and etrailer Easy Grease axles. Inner bearing (L44643) and race, outer bearing (L44643) and race, grease seal, grease cap, and lug nuts included.Features: Trailer hub-and-drum assembly provides surface area for brake shoes to grip when brake is activated Compatible with electric and hydraulic drum brakes Dexter E-Z Lube and etrailer Easy Grease-compatible grease cap makes lubricating bearings fast and easy Remove rubber plug to access zerk fitting on spindle - no need to disassemble hub Sturdy iron construction Zinc-enriched paint on drum adds durability Zinc-finished bolts resist corrosion Pre-greased hub-and-drum assembly is easy to install - no need to pack bearings Lithium complex, multipurpose grease keeps bearings lubricated Bearings, races, grease seal, grease cap, and lug nuts are included QAI and CSA certified Specs: Application: 2,000-lb Dexter E-Z Lube and etrailer Easy Grease trailer axles with BT8 spindles Compatible with standard axles from most manufacturers, including Dexter, Lippert (LCI), and AL-KO Actual drum dimensions: 7-5/8" diameter x 2-7/16" wide Works with 7" brake assembly Bolt pattern: 5 on 4-1/2" Wheel studs: 1/2" diameter x 1-1/4" long Grease cap flange diameter: 1.99" Weight capacity: 1,000 lbs Limited 1-year warranty Bearing, Race, and Seal Information Bearings (included) Inner bearing: L44643 (1" inner diameter) Outer bearing: L44643 (1" inner diameter) Races (included) Inner race: L44610 Outer race: L44610 Grease seal (included): 34823 Inner diameter: 1.249" Outer diameter: 1.983" Thoroughly Tested for Safety This hub-and-drum assembly meets the requirements for certification by the Canadian Standards Association (CSA).
Secure Leverlock system on this corrosion-resistant actuator ensures that the coupler locks in place on hitch balls measuring 1-7/8", 2" and 50 mm. Designed for drum brake applications.Features: Hydraulic actuator synchronizes trailer brakes with tow-vehicle brakes Leverlock coupler mechanism ensures easy, secure connection Adjustable to fit 1-7/8", 2" and 50-mm balls Trigger latch is easy to use Breakaway kit included Zinc plating is corrosion resistant Durable steel construction Bolt-on installation Bolt holes 3" apart on center Made in USA Specs: Application: hydraulic drum brakes Ball size: 1-7/8", 2" or 50 mm Some adjustment may be required Mounting: 3" wide channel tongue Capacity: 7,000 lbs Maximum tongue weight: 700 lbs 1-Year warranty When you apply the brakes in your tow vehicle, deceleration occurs and momentum pushes your trailer toward the rear of your vehicle.
Get the best in brake actuator technology with the BrakeRite EHB. Use your brake controller in conjunction with a hydraulic actuator for better, more controlled stopping.Features: Electric-over-hydraulic brake actuator mounts on trailer and hardwires into trailer wiring system Brake controller (sold separately) is required to send signal from tow vehicle to actuator when brakes are applied Signal triggers pump and motor on actuator, activating trailer brakes Pump-and-motor-based system increases response time compared with traditional hydraulic actuators Trailer brakes are triggered when you apply brakes in tow vehicle, as opposed to when trailer pushes against hitch ball Electronic, proportional pressure valve ensures that braking is smooth and effective Controls braking pressure during long-term braking Fluid reservoir is isolated and has diaphragm-type filler cap to prevent spills and leakage Specs: Application: hydraulic drum brakes Hydraulic pressure: 1,000 psi Vehicle must be wired with an in-cab electric brake controller (sold separately) 1-Year warranty With a faster response time and more proportional braking than traditional, surge-type actuators, the BrakeRite is perfect for nearly any towing application from light to heavy duty.
Galvanized hub-and-drum assembly is ideal for marine use. Compatible with electric or hydraulic brakes. Fits 5,200-lb to 7,000-lb axles. Inner bearing (25580) and race, outer bearing (14125A) and race, grease seal, cap, and 1/2" nuts included.Features: Trailer hub-and-drum assembly provides surface area for brake shoes to grip when brake is activated Compatible with electric and hydraulic drum brakes Sturdy iron construction Galvanized finish on drum offers excellent corrosion resistance Ideal for use on a boat or snowmobile trailer Zinc-finished bolts resist corrosion Bearings, races, grease seal, grease cap, and lug nuts are included QAI and CSA certified Specs: Application: 5,200-lb, 6,000-lb, and 7,000-lb axles with #42 spindles Compatible with standard axles from most manufacturers, including Dexter, Lippert (LCI), and AL-KO Drum dimensions: 12" diameter x 2" long Works with 12" brake assembly Bolt pattern: 8 on 6-1/2" Wheel studs: 1/2" diameter x 1-5/16" long Grease cap flange diameter: 2.722" Weight capacity: 3,500 lbs Limited 1-year warranty Bearing, Race, and Seal Information Bearings (included) Inner bearing: 25580 (1.75" inner diameter) Outer bearing: 14125A (1.25" inner diameter) Races (included) Inner race: 25520 Outer race: 14276 Grease seal (included): GS2250DL Inner diameter: 2.25" Outer diameter: 3.376" Thoroughly Tested for Safety This hub-and-drum assembly meets the requirements for certification by the Canadian Standards Association (CSA).
Install this hub-and-drum assembly on your trailer. Fits 5,200-lb to 7,000-lb E-Z Lube axles. Inner bearing (25580) and race, outer bearing (14125A) and race, grease seal, grease cap, wheel bolts, and lug nuts included.Features: Trailer hub-and-drum assembly provides surface area for brake shoes to grip when brake is activated Compatible with electric and hydraulic drum brakes Pre-greased hub is easy to install - no need to pack bearings E-Z Lube-compatible grease cap makes lubricating bearings fast and easy Remove rubber plug to access zerk fitting on spindle - no need to disassemble hub Sturdy iron construction Bearings, races, grease seal, grease cap, wheel bolts, and lug nuts are included Hub and drum are made in the USA Specs: Application: 5,200-lb to 7,000-lb E-Z Lube trailer axles with #42 spindles Drum dimensions: 12" diameter x 2" wide Works with 12" brake assembly Bolt pattern: 8 on 6-1/2" Grease cap flange diameter: 2.72" Wheel stud diameter: 1/2" Weight capacity: 3,500 lbs Bearing, Race, and Seal Information Bearings (included) Inner bearing: 25580 (1.75" inner diameter) Outer bearing: 14125A (1.25" inner diameter) Races (included) Inner race: 25520 Outer race: 14276 Grease seal (included): GS-2250DL Inner diameter: 2.25" Outer diameter: 3.376" E-Z Lube-Compatible Assembly for Simple Lubrication The grease cap on this hub-and-drum assembly is specially designed to work with your Dexter E-Z Lube axle to make lubricating bearings quick and easy.
Filters
