Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
Hey Derek! Blue Ox 2-Point Weight Distribution w/ Sway Control #BLU75FR will fit your 8" tall I-beam frame on your trailer. I reached out to my contact at Blue ox just to double check and they said 8" is the max and it will work with an…
view full answer...I've attached the bolt pattern measurements for you of the Fulton High-Performance 2-Speed Trailer Winch #F142412. The only thing I wasn't able to fit on the diagram is the length of the slots. The top two slots are 1 inch long and the longer…
view full answer...The nut that is recommended with the #34007-187-00 is the part #192600 which is designed for 7/16 inch diameter threads that are 20 threads per inch. The diameter of the rest of the bolt is 9/16 of an inch.
view full answer...I went out to the warehouse to measure winch strap #DL24239. At the widest/thickest part of the hook it is 0.83 inches which is between 13/16 and 7/8 inches. Based on your measurements it sounds like the hook will fit!
view full answer...I believe I understand what you are asking for on the BoatBuckle Boat Winch Strap #IMF17741 and the dimension is 5/8 inch. Since it's harder to describe like you mentioned I attached a picture that has this dimension as well. If you were looking…
view full answer...The LED lights on the CE Smith Post-Style Guide-Ons #CE27760 do not have separate wiring for only the red portion of the LED Cap Light #CE27656A. They are normally used to act as running lights to make maneuvering the trailer easier in low light…
view full answer...Hello Steve, thanks for reaching out. All of the trailer tires we sell come balanced in the manner that trailer tires are balanced. Every tire and every wheel has a high (heavy) and low (light) spot. The manufacturers offset the high spot on the tire…
view full answer...Yes, the Kenda Karrier S-Trail ST145/R12 Radial Trailer Tire #AM10140 referenced in your question will fit the same 12 inch wheel with a 4 inch width that your existing 4.80-12 size tires are mounted to. Just note that the ST145/R12 tire will be…
view full answer...The loop at the hook end of the Dutton-Lainson winch strap, #DL24291, is called a hand-saver loop, and is used with winch straps for safety and convenience. The loop makes it easier when pulling slack, and safer if feeding the strap to the winch…
view full answer...I spoke to Dutton-Lainson about the Drop Leg Trailer Jack with Footplate - 2,000 lbs part #DL97MR and they informed me that it will take 8 cranks of the handle to raise or lower the jack 1".
view full answer...The 3,200 lb 2-Speed Boat Trailer Winch with 20' Strap and Brake #315-W3200D will be sufficient to pull in your 3,190 lb boat if your trailer has rollers on it as that will make your boat easier to move. If you have bunks then it will technically…
view full answer...I went out to our warehouse and measured the Single-Speed Boat Trailer Winch part #315-W2000D for you. The dimensions of the base are as follows; 6-1/4" long x 3-3/4" wide.
view full answer...