Hey Andy, the bolts that come with the Demco Spare Tire Mount for up to 4" Trailer Tongue #DM15851-52 that you referenced are right at 4 inches long 3/8 inch diameter and are a fine thread. Did you lose yours?
Rhino Rack offers versions of their Pioneer Platforms that fit aero bars with the part #RR42114BF for a 48 inch by 38 inch platform or the part #RR42115BF which is 58 by 47 inch.
The Rhino Rack Pioneer Platform Rack #RR42114BF inlcudes mounting hardware that will allow you to mount the rack in the T-slots of your vortex aero bars or wraparound the bars with the clamp mount. I've linked our review video of the product that…
You could use pvc pipe and secure it to the frame of the trailer, but that is way overkill and way more work then you need to do to protect the wires. I would just get some wire loom the correct size for however many wires you have to run, and some…
Hi Barry; we don't have a list of trailers customers have added the etrailer Scissor Stabilizer Jacks #e56VV onto. Trailer manufacturers use a variety of scissor jacks even on the same model trailer. They're often using whatever they have…
The Kenda Karrier ST225/75R15 Radial Trailer Tire - Load Range E #AM10303 would work just fine to replace the Westlake ST235/75R15 tires currently on your trailer but will be about 1/2" narrower and shorter. The #AM10303 has a load rating of…
Hi Paul, I completely get where you’re coming from on the “too much fuss” part, especially when you’re not on a perfectly level pad. Those cross-frame stabilizers can turn into a bit of trial and error on uneven ground, so it makes sense you’re…
Hey Jim, that’s a great question and I completely understand wanting this to be a clean, no-hassle bolt-on. The good news is the Trailer Valet system part #TV68FR uses a universal mounting bracket design, so you don’t need to worry about matching up…
That's a very good question, we tend to be extra cautious and say to use 10 gauge wire because that would be more than enough. When you get into longer trailers that will end up using a lot of wire the heavier gauge wire becomes more necessary.…
The Dometic RV Water Heater #DMC74FR is our only gas/electric tank type water heater. It will require you to modify your opening slightly as it requires a cutout 12-3/4" tall by 12-3/4" wide. Then you will need the Water Heater Door…
Hey Ben, the total height of the etrailer jack part #e34RV when fully retracted is 16-1/2 inches. Would that fit in the area you have between the fender and rear supports?
The handle on the Ultra Faucets 6" Drinking Faucet #277-000189 does not have to be held down to dispense water, it will continue to flow. The spout of this faucet is not flexible.
Filters
