Search: dexter hub assembly   >  

You can use the other components you remove from your hubs. After you have removed the hub components you will want to inspect all of the parts and replace if you find any discoloration or signs of wear or damage such as a nick. On the race you can…

Thanks for providing a photograph of your trailer axle sticker. I was able to speak with my contact at Dexter Axle and find out the bearing sizes. You need the etrailer #BK3-300 Bearing Kit. This will get you bearings, seals, and races. At this…

Torque specs for wheel lug nuts will vary depending on the diameter of the lugs, type of lug nut and the wheel's material. The linked chart details the recommended torque for many combinations. Dexter Hub/Drum #84546UC3 has 1/2-inch studs…

The bearing part #L44649 has an inner diameter of 1.063 and is typically used in 3,500 lb axle hubs and the #L44643 has an inner diameter of 1 inch and is typically used on 2,000 lb axle hubs. If you can get me more info on your trailer like axle…

I am not sure what you mean by MTI number?

The Timbren Axle-Less Trailer Suspension System #A35RS545 is the only thing we offer that would fit your narrow Harbor Freight trailer. Our shortest 3,500lb standard Axle #e65GR is 89" wide from hub face to hub face. The Timbren system…

Thank you for the photos, though there is only one measurement there so it would be very difficult for me to tell you exactly what you currently have. That said, the most important measurement you can take is of your brake mounting flange, and I…

For the Dexter 4.4k axle we have the following bearing/seal parts available: Inner Bearing #L68149 Outer Bearing #LM67048 Seal #RG06-050 Inner Race #L68111 Outer Race #LM67010

No, I contacted the tech at Dexter and you do not have to press the bearing in place with a driver when installing 50MM Nev-R-Lube bearings for 8,000-lb Dexter Axles part #31-71-3 because there are not any races or seals to drive into place. When…

Dexter Nev-R-Lube Bearings such as the 50MM #31-71-3 referenced in your question do not have a specific maintenance or replacement schedule. These are pre-lubricated at the factory, which will make it resistant to contamination, and sealed for life…

The Optronics Trailer Clearance or Side Marker Light part #MC44RB for red or part #MC44AB for amber work great to replace the old discontinued Glo Brite 126R/126Y. They are not the exact same but very similar in design and dimensions. They feature a…

To replace your GloBrite 126 marker lights you can use the #MC44RB for the red light and the #MC44AB for the amber light. Both of these lights are 2 wire lights and will work well on your cargo trailer. And yes, we can ship this particular product to…