4,400 lb Self-Adjusting Brakes for Fifth Wheel Trailer
Updated 11/25/2019 | Published 11/24/2019
Products Featured in This Question
Question:
Hi, I have a 2013 Open Range fifth wheel that has 4400 lb Lippert axles that have a manufacture date of September 2012 see attached picture. I would like to upgrade the brakes to self-adjusting, but I am confused about Before May 2009, and After May 2009 versions. I have removed my brakes and measured the distance between the four holes which seems to be 2-13/16 all the way around square pattern - see picture. This seems to be at odds with the After 2009 description, so now Im not sure which one is right. Can you advise? Thanks,
asked by: Dale H
Expert Reply:
Thank you for the photos, though there is only one measurement there so it would be very difficult for me to tell you exactly what you currently have. That said, the most important measurement you can take is of your brake mounting flange, and I would be very surprised if the Dexter Nev-R-Adjust Electric Trailer Brake Kit - 10" - Left and Right Hand Assemblies - 4.4K # K23-478-479 don't work for you. The bolt hole measurements of these brakes need to match up with your brake mounting flange, as opposed to measuring your current brakes.
In regards to the Dexter Electric Brake Kit for 4.4K Axles Manufactured Before May 2009 # 23-454-455 these are going to be a pretty rare fit, and are only meant for certain Dexter axles from before that date. Seeing as how you have an axle from three years later and a different manufacturer, it simply doesn't make sense that these would be a fit for you.
Product Page this Question was Asked From
Dexter Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 2009 and Older 4.4K Axles
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Manual Adjust
- 10 x 2-1/4 Inch Drum
- 4400 lbs Axle
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Can Round U-Bolts Be Used On a Square Axle Tube?
- Shop: Fusion LED Trailer Tail Light - Stop, Tail, Turn, Backup - Submersible - Oval - Red/Clear Lens
- Shop: Optronics LED Trailer Clearance or Side Marker Light - Submersible - 3 Diodes - Round - Red Lens
- Video: Optronics LED Trailer Lights | Straight from the Manufacturer
- Video: etrailer 7 Way Upgrade Kit With Junction Box Installation
- Video: Fusion LED Combination Tail Light Bar for Trailers Over 80" Wide: The Breakdown
- Shop: Trailer Hub and Drum Assembly - 4,400-lb E-Z Lube Axles - 10" Diameter - 6 on 5-1/2
- Shop: LumenX LED Trailer Tail Light w/ Grommet and Plug - 4 Function - 7 Diodes - Oval - Red/Clear Lens
- Shop: Dexter Trailer Hub and Drum Assembly for 4,000-lb E-Z Lube Axles - 10" Diameter - 5 on 4-1/2
- Shop: Dexter Trailer Hub & Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Shop: Dexter Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 4,400 lbs
- Article: Trailer Wiring Diagrams
- Search Results: trailer hitch
- Shop: Trailer Hitch
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Video: Firestone Ride-Rite Air Bags with Easy Mount Compressor Feature Breakdown
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: trailer tires and wheels
- Shop: Trailer Wiring
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Search Results: trailer wiring
- Shop: Suspension Enhancement
- Video: Measuring To Choose The Right Trailer Axle
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Video: How to Choose a Trailer Brake Controller
- Q&A: Instructions to Wire a Trailer for Electric Brakes
- Search Results: trailer jack
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Shop: Brake Controller
on Trailer Brakes
